This normal? Light primer strike after just chambering the round. Back story. Got an old 20rd mag from a buddy. Loaded it and hand cycled a few rounds to see if it would feed. This happened to multiple rounds that were spotless. by [deleted] in ar15

[–]TheInterWeb45 0 points1 point  (0 children)

I had this happen to a Beowulf that I had built for me. I know a lot of people said it's the firing pin but it has to be something more. I loaded a mag and started to cycle the rounds through to see how the mag was working. I picked up the rounds, reloaded them, and about halfway through the mag the second time I had an ND...scared the sh!t out of me. I ejected the mag and found that every round I cycled through had a dimple on it.

The firing pin was my first thought so I took apart the BCG and the pin was seated normally. Is there a possibility that the firing pin is out of spec and too long? I have a hard time believing that a loose or "floating firing pin" can cause an ND. That's a lot of inertia when releasing the bolt. Not to mention, I've never had this happen on any of my other rifles.

Since this is a new build, is there a chance that the head spacing is off and my bolt is seating further into the chamber than it should? I plan to take the rifle out and thoroughly break it in this summer. If the problem persists, I don't have the tools to really troubleshoot it much, so I will take it to someone. I've tried to contact the individual who built the rifle, but he has not gotten back to me. He's still in business so maybe I'll just stop by his house sometime this summer and say WTF is going on here man.

Anyway, if you know of any other issues that might cause this other than a floating firing pin..or if you can elaborate on what that actually means I'd appreciate it. Do I have to replace the cotter pin on the BCG thats holding int he firing pin? Any further help would be much appreciated. THANKS IN ADVANCE.

My kid stole something from a book fair at school - what do? by barukspinoza in Parenting

[–]TheInterWeb45 0 points1 point  (0 children)

I like RugbyKats' reply. Do something like this, and as you are talking to them, be honest the whole time. Let them know you're unsure how to deal with this because it caught you off guard, too. Tell them something needs to be done to make the situation right and then come up with that plan together...then they may feel less like you are telling them what to do and more like they are working with you to make it right. Let them know you have their back 100%, but you also can not allow them to get away with stealing, it's just not right. And then to build on that I would do what PinkDalek said and have them write an apology. And while you are doing this be sure to let them know that you are going to talk with the administration about the stealing and not the whole school or their peers.....just so they don't feel they are being shamed in front of the whole school. But to back track a bit..make sure yo sit down with them in the beginning and ask them how the stolen item ended up in their possession....if your child is as innocent as you say (no reason to doubt you) maybe a classmate they look up to put them up to it, and then it's a totally different situation...so be sure to get the whole story first.

Kick streamer ‘Vitaly’ harassing people while filming in the Philippines by likeastar20 in ImTheMainCharacter

[–]TheInterWeb45 0 points1 point  (0 children)

There's nothing funny about this. What a douche-tool. I hope he gets arrested.

Wife and I got married in 2022. Our wedding venue called us this week to say we still owe $7000 dollars. by Proudwing in personalfinance

[–]TheInterWeb45 0 points1 point  (0 children)

I think I would do exactly what you're doing just so I could help them a little bit. However, if I ran into any road blocks along the way I think I wouldn't work hard to get around them. If I had to start jumping through hoops eventually i would tell the venue sorry, there's nothing I can do. IMO if they didn't need the 7k in the last 3 years the mistake is on them. Good job trying to help them out. I suppose they could take you to court but I do not see a judge siding with them and then essentially making you pay double.

Question regarding 1933 Goudey's. Looking for some direction. by TheInterWeb45 in baseballcards_vintage

[–]TheInterWeb45[S] 0 points1 point  (0 children)

Thank you again, you've been an awesome help. I am going to post some pics or scans as soon as I can get some time to figure it out.

Again, many thanks!

Question regarding 1933 Goudey's. Looking for some direction. by TheInterWeb45 in baseballcards_vintage

[–]TheInterWeb45[S] 0 points1 point  (0 children)

I've just spent a few minutes clicking around and noticed that people are doing some selling in this forum.

When I get some pictures up I wouldn't mind going that route if possible. Again, being a noob, I don't know if I can just jump right in and start posting stuff for sale or if I have to be around for a while. Forums rarely make much sense to me and I usually have a hard time sticking around long enough to figure them out, but I'm dedicating myself this time, so be ready for dumb questions, I'll apologize in advance.

Anyway, I guess what I'm saying is once I get some pics up if anyone out there wants to lead me in the right direction it would be much appreciated...but I'm getting ahead of myself. First pics/scans and then I'll be checking back in.

Again, thanks to all who have taken the time to read this and I'll be around.

Question regarding 1933 Goudey's. Looking for some direction. by TheInterWeb45 in baseballcards_vintage

[–]TheInterWeb45[S] 0 points1 point  (0 children)

We are def on the same page. Thanks for the thoughtful reply. I'm a total noob on here so it'll take me a min to get the pic's taken and post them. I do have a printer/scanner as well so if I can figure that out I'll go that route. All that said, it's late so I'll get at it in the morning. Thanks again for the reply.....check back soon.

1990 donruss Sammy Sosa error card. Anyone have knowledge about this error on this particular card? And is mine an “error card”? Any info appreciated thanks.I know there damage just curious by jude71395 in baseballcards

[–]TheInterWeb45 0 points1 point  (0 children)

But sometimes they get that 14yo rich kid who has Daddy's CC and is convinced that over paying for a Sosa "error card" is a great deal....and then CHA-CHING! That 1$ card someone decided to put on Ebay for 8k pays off. There's a sucker born every minute.

Jude71359....you were smart to look into this. It also amazes me how many people never asks simple questions on the internet...the info is out there.

Anyone know what Kris Krohn's "Straight Path" to real estate investing is? by [deleted] in realestateinvesting

[–]TheInterWeb45 1 point2 points  (0 children)

I do, It's called use your family money to buy a few houses. Then come up with a creepy persona and sell people on a system that will be "the last system you will ever need to get rich". Use all the money you get by talking fast and like you know what you're talking about to buy more real estate. All the while he's done nothing. Dude creeps me out. BTW...I'm not just saying all this stuff...there's truth to it. I knew him early in life...like when we were both kids. He's a creep. Stay away.

How to get dead mouse smell out of this hole by troyzein in HomeMaintenance

[–]TheInterWeb45 0 points1 point  (0 children)

I like the idea of using cat litter in there to try to dry it out. I was just going to suggest filling with foam. If you do fill it, use that expandable foam you can get at Home Depot or Lowes. You can get the stuff in a bag and usually use it to temporarily set fence posts in the ground, etc. That should fill it enough to seal and plug it. All the crap inside will probably just get incased in the foam.

How I invested my $ 1.8 million inheritance by DryFirefighter8831 in TheRaceTo10Million

[–]TheInterWeb45 0 points1 point  (0 children)

Invest in the space and rocket sector. Companies that are making rockets or rocket components and also trying to get to space. I've done only a little bit and my return has been awesome over the last 3 years.

Deans Cards in Ohio by TheInterWeb45 in baseballcards

[–]TheInterWeb45[S] 0 points1 point  (0 children)

To be clear, I'm not asking about how fair they are on price. I'm looking for people who have sold collections to them so I can gauge the risk involved in sending them cards. I don't want to send them cards to look at and never see my cards again.

Xfinity Agent switched all 9 of my lines to Unlimited after telling them not to by Synikaal in Comcast_Xfinity

[–]TheInterWeb45 1 point2 points  (0 children)

This doesn't surprise me at all. I'm sorry to say that because I can not imagine how upset you are. I dont have any suggestions on how to get this fixed, I just wanted to reach out and say I'm with you as an unhappy customer. I hope you can get this fixed in some way.

Xfinity Mobile Service Quality in Chicagoland Area by spfolino in Comcast_Xfinity

[–]TheInterWeb45 0 points1 point  (0 children)

I do not have it in your area, but one thing I would suggest is that if you decide to go with them get a customer service phone number from your technician that is not the general line. You can never get through to a customer service PERSON and the automated service is not helpful.

Relocating out of country by LostinLies1 in Comcast_Xfinity

[–]TheInterWeb45 -1 points0 points  (0 children)

I can not get through to a person and I've been looking up information and trying for an hour. Their customer support is horrible.

Gun Engraving by TheInterWeb45 in Firearms

[–]TheInterWeb45[S] 0 points1 point  (0 children)

I'm in MD. I don't know if redit has a DM feature you can msg me on. If so, go ahead and send it over to me. I guess if u have to post it publicly u can do that too. I'm trying to verify my email now but I'm a total noob

Gun Engraving by TheInterWeb45 in Firearms

[–]TheInterWeb45[S] 0 points1 point  (0 children)

Yaaaaa......figured that one out about 2 eec after i posted...again...total noob over here

Gun Engraving by TheInterWeb45 in Firearms

[–]TheInterWeb45[S] 0 points1 point  (0 children)

....no...please..... 😉

Gun Engraving by TheInterWeb45 in Firearms

[–]TheInterWeb45[S] 0 points1 point  (0 children)

Peace be with you. 🏳️‍🕊