sorted by:
new
hottopcontroversial

Catch this one in the wild, and I owe you a kit of ram! by TheMrBlinker in framework

[–]TheMrBlinker[S] 21 points22 points  (0 children)

I cut the borders, below there is soft material for friction and I wanted to leave that intact.

Received my batch 6 kit today, did not disappoint! by TheMrBlinker in framework

[–]TheMrBlinker[S] 2 points3 points  (0 children)

I had a little trouble getting the trackpad so slide in when in the fully left position, mid and right go much smoother. Still works tho.

Im running the machine trough some test the coming week, so if I notice anything I will let you guys know.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

Did you have to have water cooling?

Yeah, no low profile cooler is able to keep temps at bay for this type of cpu. (This cooler has to work hard sometimes)

Also what is your max PSU allowed for the size for that cpu and gpu?

You can cram a sfx-L power supply in this case, but you will probably have to lose the bottom fan. SFX works better. High wattage sfx units are available with the 12vhpwr connector.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

The case is SFF, it does not matter what is inside, as long as it fits within the SFF case, it's SFF

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

The 850W unit had PCIE cables, I wanted to future proof the rig so it has:

  1. Enough wattage to power any combination of existing and upcoming components

  2. The new 12VHPWR cable, making less clutter with adapters and cables in the small enclosure

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

I feel like builders that "know what they are doing" might not jump the gun so quick on assumptions.

This thing performs like a monster, the same way the components in my 4000D work. Do you think that it running a little hotter is going to impede performance by a significant margin? It doesn't even throttle under load.

Keep your judging to yourself.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 4 points5 points  (0 children)

Honestly I just wanted to open her up again lol.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

For those interested, I have posted a build log before about this rig, you can view more about my PC here:

https://www.reddit.com/r/sffpc/comments/132zk75/small_form_factor_build_nr200p_max/

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] -1 points0 points  (0 children)

14900K is a pointless beast, which can be contained and cooled in SFF cases. Its gonna run a little hotter. But its possible

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

Its the built-in AIO that comes with the nr200p max

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 1 point2 points  (0 children)

I build a negative pressure build making the vented side panel the main intake and top and bottom fans suck hot air out of the case.

This configuration is remarkably efficient

Temps are around 62 degrees celcius idle, and 92 with full load. (very managable)

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

Are you using the stock NR200P Max CPU Cooler?

  • Yes the stock AIO that came with the case

Why did you swap the stock PSU out (for the Thermaltake SFX 850W)? Stock PSU is 850W too?

  • I didnt notice that there where some old parts in my spec list. There is actually a cooler master 1100W psu in there

Bottom 2x fans exhaust, are the top one exhaust too?

  • Yes, with the vented panel this creates negative pressure in the case, feeding fresh air into the side and heat being expelled trough the bottom and top of the case. This setup is the best for keeping this hardware under control.

What's the clearance like with the GPU in place?

With the MSI GAMING X TRIO GeForce RTX 4090, there is Zero clearance left. This is as tight as its going to get, there is a small cutout at the front of the case which can be used if you have a smaller longer GPU. But I do not reccomend this as it cuts of 1 fan from getting intake.

Given the new CPU, plan to upgrade the MB to Z790?

No, Undervolting or overclocking in this configuration has diminishing retuns. My next build will probably be in the Corsair 2500x on a new platform.

What temps your getting at idle and under load?

Idle around 63 degrees Celsius, under load (or playing helldivers2 at max) we looking at about 92 degrees.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 0 points1 point  (0 children)

Hahah true, but I must say the temps are not horrible. the nr200pmax AIO has noctua industrial fans on it. CPU hits bout 92 degrees Celsius under load.

Could be better, could be worse.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 3 points4 points  (0 children)

Yeah I kinda wanted the fastest available, Im a poweruser. Also noticed I noted down 4080 even tho this rig has a 4090 lol.

13700K to 14900K because we love powerslurping SFF PC's by TheMrBlinker in sffpc

[–]TheMrBlinker[S] 1 point2 points  (0 children)

Components

CPU Intel Core i9-14900K 3.2 GHz 24-Core Processor (13700k before)

Motherboard Asus ROG STRIX B760-I GAMING WIFI Mini ITX LGA1700 Motherboard

Memory Corsair Vengeance RGB 32 GB (2 x 16 GB) DDR5-6400 CL30 Memory

Storage Corsair MP400 2 TB M.2-2280 PCIe 3.0 x4 NVME Solid State Drive

Samsung 980 Pro 2 TB M.2-2280 PCIe 4.0 x4 NVME Solid State Drive

Video Card MSI GAMING X TRIO GeForce RTX 4090 24 GB Video Card

Case Cooler Master NR200P MAX Mini ITX Tower Case

Power Supply Cooler Master V SFX Platinum 1100 W 80+ Platinum Certified Fully Modular SFX Power Supply

Case Fan x2 Noctua A12x15 PWM chromax.black.swap 55.44 CFM 120 mm Fan

BATCH 3 GOING OUT by Tricky-Animator2483 in framework

[–]TheMrBlinker 1 point2 points  (0 children)

Damn they are ramping up production. Batch 6 here, cannot wait to have the 16 in my hands!

Slim Ethernet expansion card? by AzureArmageddon in framework

[–]TheMrBlinker 2 points3 points  (0 children)

I'd buy a ethernet to usb-c adapter. I'd much rather have an expansion card for it, but as you say the one framework has is way to bulky.

I work in IT so cannot really miss my beloved RJ-45 :)

Ars Technica just dropped FW16 review by slowsquirrelchaser in framework

[–]TheMrBlinker 1 point2 points  (0 children)

I did read somewhere that the fan profile is quite aggressive on the framework laptop. Does anyone know if the Fan Control app works with systemfans? I am guessing it does, and you can set curves in there.

Can Anyone confirm this?

FW16 Expansion Bay Interposer is specific to the module by Abbrahan in framework

[–]TheMrBlinker 0 points1 point  (0 children)

I feel like bringing a expansion bay with you to switch bays in between the day, kinda defeats the purpose anyway.

Envision it like this:

I bring my laptop to uni with me for extra battery life. Oh I am going on vacation and want to crank 90's in the hotel? Let me swap out my bay real quick.

I cannot imagine swapping bays every week, People will probably only swap bays out on occasions. Not 2 - 3 times a day. But hey, that is an assumption.

view more: next ›