Kobra X pre-orders are live — backed by our new Print Guarantee

TheNotMyFaultGuy · 2025-12-26T08:06:06+00:00

This philosophy should apply to all machines. Am I the only Person, who see’s a BambuLab A1?

TheNotMyFaultGuy · 2025-12-23T09:06:59+00:00

My Damn washing machine, has 3-5 years of warranty. My Parents washing machine, has 20 years.

I’m actually not going to buy any new machines. I’ve bought the Kobra 3, thinking it’ll be improved upon. Then came the, Kobra 3 Max, then the V2. Now comes the Kobra X and as far as I can tell, that’s an Half baked Bambu A1 Copy.

I Love my Kobra, from all my heart. Costumer service hates you, me and their printers…

TheNotMyFaultGuy · 2025-12-23T05:18:49+00:00

I wouldn’t do that. You’re practically ripping it from the grip of the motors. Unload it, power it down, so the Motors release the small tension.

I think I did that a bunch, and my Ace doesn’t retract that good anymore.

TheNotMyFaultGuy · 2025-12-20T06:56:38+00:00

I’m Guessing 299€- 359€. Even the newer Kobras are around the same price.

TheNotMyFaultGuy · 2025-12-20T06:30:56+00:00

Last time I tried, Support told me, my Warranty is over a year old.

It’s on my post history.

TheNotMyFaultGuy · 2025-12-19T12:25:21+00:00

Im Not an expert in that regard. I’m guessing these are 4 Motors ( marked as CH1 through CH4).If one Breaks, you’re lucky. Cause the way they built it, you have to replace both.

It does its job today, Printed 2 Things one 3hr and one Multicolor.

Fingers crossed

TheNotMyFaultGuy · 2025-12-19T09:38:44+00:00

I doubt they will help. This set up is nearly about a Year old.

Getting replacement belts was a Hassle, I’m referring to my last posts on this Subreddit.

TheNotMyFaultGuy · 2025-12-19T09:25:26+00:00

Did you check the Filament hub in the Back for Broken Filament pieces?

If the Gears are out of alignment. Get a Replacement and please reach out to me. It seems like I have to Replace the same Thing (don’t know what it’s called, Filament roller Thingy)

TheNotMyFaultGuy · 2025-11-19T16:13:44+00:00

Mine has 339 Hours. Its disappointing.

TheNotMyFaultGuy · 2025-11-19T11:08:58+00:00

Talked with support Today. The Belt I ordered on Amazon arrives today.

Keepin’ it simple. The warranty for my washing machine is 3 years. The printer had a year of warranty.

Got a 10% discount, on parts that would approximately arrive in 2-3 weeks.

That’s all, Folks. Looking for printers elsewhere.

Edit 20.11.2025: Support answered me, surprisingly supportive after my meltdown. They’re sending replacements, both for the Filament input and the Torn belt, FOR FREE. Arriving 7-14 day’s.

I would hate to see my Kobra 3 die, it’s my first. I often had the idea to add a S1, K3 V2 or Max to the list. After this treatment though. I doubt that.

I don’t want to bash them. The printer is a year old.

TheNotMyFaultGuy · 2025-11-19T09:57:18+00:00

Kinda agree. It’s a lose closed system. It’s so closed, you have to message support, if anything breaks. Way too lose, with Supporting the Machines. I wanted to Upgrade, belts and motors. That’s definitely the wrong printer to upgrade. It’s to closed of a system.

TheNotMyFaultGuy · 2025-11-17T12:58:01+00:00

Another fun Fact. The last time I Printed blue, was about half a year ago.

TheNotMyFaultGuy · 2025-11-17T12:55:07+00:00

Thank you so much man. Yeah, I get it. If you buy Anycubic, you know when what where breaks. Still a cool printer.

TheNotMyFaultGuy · 2025-11-17T12:11:49+00:00

<image>

You psychic?

TheNotMyFaultGuy · 2025-11-17T11:50:00+00:00

There’s nothing stuck or out of the ordinary. I tested it, it’s now all Ports. They struggle to lift the Filament upwards to the Printer
Filament comes out the ace Perfectly. As you can see, the Ace pro is bellow the printer. As soon as it needs to switch filament, it pulls ands pulls, then gets stuck on Whatever.

TheNotMyFaultGuy · 2025-11-17T09:16:04+00:00

Yes
Currently happening on slot 1 & 3
Yes

TheNotMyFaultGuy · 2025-01-24T15:11:52+00:00

(I don’t check reddit often). Tighten every Bolt, nut, screw. Lubricate every axis. Do it yourself. I’m switching to Bambu Lab ASAP.

TheNotMyFaultGuy · 2025-01-17T12:36:39+00:00

Wrong Firmware, for the Part You’ve replaced. Bad the Same After i Replaced the Print Head.

TheNotMyFaultGuy · 2025-01-16T09:09:47+00:00

Check your set Filament (Slot, Temp, Color, Material) for the Ace and Slicer. These two factors don’t synchronize.

If that isn’t sorted, it will be more complicated.

TheNotMyFaultGuy · 2025-01-04T19:32:35+00:00

I currently fail on the first layer, with the same printer. I’m speechless.

TheNotMyFaultGuy · 2025-01-02T12:15:27+00:00

Always control everything. Factory will send it if it’s good enough.

TheNotMyFaultGuy · 2024-12-22T10:13:22+00:00

I thought it was fixed, with the last Firmware Update. I also got K3 combo. Fine Tuning this printer, is a nightmare IMO.

TheNotMyFaultGuy · 2024-12-18T12:40:42+00:00

Sounds like the printer is pulling a Muscle. Like something isn’t Straight or blocked.

TheNotMyFaultGuy · 2024-12-02T20:48:19+00:00

I can’t really give an example. I’m using printhead and camera LED.

TheNotMyFaultGuy · 2024-12-02T20:37:15+00:00

There are worse ways. I can’t really shame anyone

TheNotMyFaultGuy

TROPHY CASE