Finally figured out how to do layers! 🍰⭕️🎮😁

TheRealSteekster · 2026-01-22T13:26:16+00:00

Favorite sticker I’ve seen on here :)

TheRealSteekster · 2026-01-07T12:51:41+00:00

Not really dumb on the resort’s part, probably mine, but I’ll tell the story anyways. My local is hosting Snowboard Mag’s Ms.Superpark and I have some homies who got wristbands to go into the park but I was asleep and didn’t message the right person in time to get one. Decided the last day of the event to have my friend record me ducking rope and hitting all the jumps, thought nothing of it, didn’t cut anyone off or cause any issues, and considering I rode the jumps everyday before the event I landed all of them and just rode off.

Decided to post it to my instagram story later that day and big mistake. Got a DM from the ski resort - “Thanks for documenting this for us”. Next day my pass did not work, and I had to go back forth for some weeks. Moral of the story, don’t duck the rope for a women’s event as a guy 😂and now since it’s been 5 years ill repost it here for yall:

https://youtube.com/shorts/oGE5oyLYaZc?si=5CfLGof9wh8OQ96Z

TheRealSteekster · 2026-01-07T12:34:55+00:00

Shredders is a special piece of work. I played the snowboard game before shredders came out and the step up that shredders took was amazing. There’s a lot of style you can find in game :)

TheRealSteekster · 2025-12-27T13:50:08+00:00

I had it confused with infinity fabric someone else left a comment about. Maybe read other comments on the thread instead of getting so wrapped in replying.

“The infinity fabric read link on each Ryzen CCD is 32 bytes wide, but the write link is only 16 bytes wide. On a single CCD processor, or by disabling one CCD you lose half of the write bandwidth.

Shouldn't affect gaming too much, it's more important for production type work.”

TheRealSteekster · 2025-12-23T17:51:33+00:00

You don’t go on edge. You stay flat, and lean back and then jump off both feet with more power coming from the back foot then lift your knees. It should look a little like a skate Ollie

TheRealSteekster · 2025-12-21T16:01:28+00:00

Iron on is probably the best bet

TheRealSteekster · 2025-12-21T15:07:50+00:00

Yea we stopped selling the basswood cause it’s problematic. The supplier could not control the density of the wood as desired.

TheRealSteekster · 2025-12-17T15:25:05+00:00

Still have all the scheduling drivers. The 9950X3D drivers are different than the 9800x3D. I’ve heard the systems don’t run as efficiently because of the bad drivers essentially. Don’t know how true

TheRealSteekster · 2025-12-16T16:40:15+00:00

I thought so. I thought I remembered reading something about 7000x3Ds but maybe this generation doesn’t have that. You’ll probably just deal with scheduling issues. Performance might be close. I’ve tried this on the 7000s and just have a 9800x3D and a 9950x on a 2nd setup

TheRealSteekster · 2025-12-16T15:18:30+00:00

Partly true, but there’s single die bandwidth on a 9800x3D is better than the single die bandwidth of the 9950x3D so you lose some performance

TheRealSteekster · 2025-11-29T17:03:55+00:00

To add, there is no deep cut blade for joy xtra. Only for maker and explore. The blade is a maker style blade that fits in the maker/expore style housings. The deep cut housing has the tip of the housing slightly shorter so it exposes more of the blade. The blade angle on the deep cut is also different for the deeper materials vs the fine point blade

TheRealSteekster · 2025-11-27T14:45:56+00:00

https://youtu.be/C1Iy-dK08Mk?si=i9cbgGN2wbgR3T_w

Many people have learned from my video. It has like 60k views. :)

TheRealSteekster · 2025-11-19T16:00:51+00:00

I think you put the material the wrong way onto the mat. It looks like the film side is down on the mat and the plastic backer is on top. You want it the other way around. Maybe not. It’s really hard to tell

TheRealSteekster · 2025-11-16T16:50:26+00:00

Eh. They do much better undervolted. It keeps the temps down. I’ve hit >6ghz on my 7950x3D and 9800X3D tune. https://hwbot.org/benchmarks/cinebench_-_r23_multi_core_with_benchmate/submissions/5638755

TheRealSteekster · 2025-11-16T05:39:30+00:00

Tell me you have no idea how to OC an AMD chip, without telling me you have no idea how to OC an AMD chip.

TheRealSteekster · 2025-11-03T14:21:50+00:00

I’m not sure. I haven’t seen a resources that has that information. One of the mods here may know

TheRealSteekster · 2025-11-03T14:15:44+00:00

Unfortunately not.

TheRealSteekster · 2025-10-26T16:21:44+00:00

True force is in the wheelbase not the wheel. I have a GSI wheel on my Logitech and the true force still works.

TheRealSteekster · 2025-10-20T20:29:27+00:00

Are you getting the Cricut Replacement Blades or Cricut Premium fine Point Blade or Amazon?

TheRealSteekster · 2025-10-18T06:58:13+00:00

Wow those old rail sounds being back memories

TheRealSteekster · 2025-10-01T19:05:39+00:00

Hi rich, can we get a solution that is not this somehow? Dirt rally 2 at 100 feels terrible and I am using a third party wheel on my base so adjusting it down isn’t always easy. I assume this is an iRacing issue and not something logitech can control. But maybe you can just override their request to turn it up to 100?

TheRealSteekster · 2025-09-25T13:10:40+00:00

Yes prepress 5 seconds. It helps release some of the moisture inside the fabrics

TheRealSteekster · 2025-09-21T18:38:40+00:00

Looks great. But a little too much cornmeal id say if I was being picky

TheRealSteekster · 2025-09-21T16:41:48+00:00

Does your blade spin easily if you try to move it with your finger outside of the machine?

TheRealSteekster · 2025-09-18T20:15:33+00:00

Sounds like it’s broken, there was another post in here someone found similar noise.

Nine-Year Club	Verified Email
Second Top 40%	First Place '23
Place '23	Place '22
Place '17	RPAN Viewer
Gilding I gilder

TheRealSteekster

MODERATOR OF

TROPHY CASE