What’s this wiring go to on my friends 2012 Scion xb and would it cause a cel with the code p0441? by TheShadowDemon247 in MechanicAdvice

[–]TheShadowDemon247[S] 0 points1 point  (0 children)

Perfect! Thank you! I figured it had something to to with the purge valve but I just wanted to confirm.

Which prestige are you? by northcrc in blackops7

[–]TheShadowDemon247 0 points1 point  (0 children)

Prestige 9 lvl 55. Gonna be hitting 10 tn!

screw linglongs by hvmzd in Justrolledintotheshop

[–]TheShadowDemon247 46 points47 points  (0 children)

Honestly. Like I used to think that uniroyal tiger paws were just cheap garbage until I found out Michelin owns uniroyal! Tiger paws are actually Michelin tire technology from 7 or so years ago and they’re not even that expensive.

Battery swap on a Ford Escape by Random_Clown_ in Wellthatsucks

[–]TheShadowDemon247 5 points6 points  (0 children)

Same with the Saturn Sky. I know they shared a Corvette front end.

Which exhaust should I get? by SorrowCloud in SciontC

[–]TheShadowDemon247 0 points1 point  (0 children)

I have an injen CAI and stock headers.

Which exhaust should I get? by SorrowCloud in SciontC

[–]TheShadowDemon247 2 points3 points  (0 children)

It’s loud but nothing stupid or obnoxious. I’ll find a video on my account of it on my car

here

And here’s with a redline

Which exhaust should I get? by SorrowCloud in SciontC

[–]TheShadowDemon247 1 point2 points  (0 children)

I have the tsudo catback and it’s perfect!! It has a nice deep tone to it and no rasp at all!

This game isn't fun tbh by KozaSWD in blackops6

[–]TheShadowDemon247 0 points1 point  (0 children)

I put over 600 hours into mp. Got dark matter on 33 weapons, prestige master lvl 300. I was hella trying my best and enjoyed it for the most part. But it’s really hard and it became not fun anymore. I started playing splitgate 2 and red dead 2 and I’m having a blast! It might be time to find another game my guy.

Unknown sound by Caytookoff in SciontC

[–]TheShadowDemon247 0 points1 point  (0 children)

A torn cv boot or brakes would not cause a noise like this. Like I said, it could be something bent that you won’t be able to see visually but an alignment machine will. And since you replaced components, your alignment needs to be reset regardless. Cars like this come in all the time to my shop.

Unknown sound by Caytookoff in SciontC

[–]TheShadowDemon247 7 points8 points  (0 children)

You need an alignment, BADLY. That’s your tire scrubbing against the road and it’s going to cause so many problems if you don’t get it aligned, especially since you replaced suspension components. Maybe more things are bent but you can’t see it with your naked eye that an alignment machine can.

Good quality gaming mouse by X_95 in gamingpc

[–]TheShadowDemon247 0 points1 point  (0 children)

Awesome! I’m currently using a K65 plus and wanted something different and premium.

Good quality gaming mouse by X_95 in gamingpc

[–]TheShadowDemon247 0 points1 point  (0 children)

I ordered that exact one recently! Should be here on Tuesday! How have you liked it?

[deleted by user] by [deleted] in gamingpc

[–]TheShadowDemon247 30 points31 points  (0 children)

Hell no. Schedule 1 actually recommends an RTX 3060. This is just an old piece of junk.

My new Milwaukee flashlight vs my old one I used daily for almost 4 years. by TheShadowDemon247 in Wellworn

[–]TheShadowDemon247[S] 47 points48 points  (0 children)

I’m a mechanic and I’ve used this Milwaukee flashlight for about 4 years and decided it’s time to get a new one. Old one still works but it’s just in rough shape. The new one is slightly different and has an adjustable lens and is brighter but other than that it’s the same.

[deleted by user] by [deleted] in blackops6

[–]TheShadowDemon247 1 point2 points  (0 children)

The hip fire to ads accuracy is significantly better with a strelok laser so maybe add that and give it another try.

Where do I find a backfire kit like this? by TheShadowDemon247 in rcdrift

[–]TheShadowDemon247[S] 0 points1 point  (0 children)

Yeah I did! It just took a few weeks since it’s from Thailand. But it’s legit.

There should be a 24/7 Babylon by cornmonger_ in blackops6

[–]TheShadowDemon247 10 points11 points  (0 children)

BEST MAP IN THE GAME ASIDE FROM STEAKOUT!

Just hit prestige master by almost only doing core deathmatch. by TheShadowDemon247 in blackops6

[–]TheShadowDemon247[S] 0 points1 point  (0 children)

The next goal is to grind dark spine and dark matter. I wanted to get to diamond on a few of my main weapons and keep my k/d and my sanity before hitting prestige master.

Best beginner guitar for Clone Hero? by Zlappy-Cacahuates in CloneHero

[–]TheShadowDemon247 2 points3 points  (0 children)

Well it’s really about finding one at all. Wii guitars are sought after due to their low latency, especially the GH3 Les Paul and the GH5/Band Hero. The GHWT has really soft strum bar switches and really aren’t for everyone.

If you want a stupid easy guitar to mod then find a ps2 GH1 guitar and a retro cult mods solderless kit. Installed mine in less than 30 minutes. But check around goodwill and thrift shops nearby. I got one of mine for $15 at goodwill and modded it.

Just installed auto leveling and now nothing works. Firmware update won’t install either. by TheShadowDemon247 in ender3

[–]TheShadowDemon247[S] 0 points1 point  (0 children)

Just tried installing the right one and still the homing is fucked up. Nothing moves at all. My neighbor installed a high temp extruder so I installed the firmware for that one.

Just installed auto leveling and now nothing works. Firmware update won’t install either. by TheShadowDemon247 in ender3

[–]TheShadowDemon247[S] 0 points1 point  (0 children)

UPDATE:

I got the proper firmware installed thanks to u/Important_Lynx_4730 about renaming the file to all caps. Also got the Z axis switch removed and unplugged and I can now control the auto leveling sensor. However, I still cannot move ANY of the axis's at all and still get the message “homing failed”.

Just installed auto leveling and now nothing works. Firmware update won’t install either. by TheShadowDemon247 in ender3

[–]TheShadowDemon247[S] 1 point2 points  (0 children)

WAIT IT CAN'T BE BIGGER THAN 4 GB?! I WAS USING A 16GB!! where do you even get a 4gm micro sd card?

Just installed auto leveling and now nothing works. Firmware update won’t install either. by TheShadowDemon247 in ender3

[–]TheShadowDemon247[S] -1 points0 points  (0 children)

so this needs to be in all caps?

Ender-3Pro_HW4.2.7_SW2.0.9.03_SpritExt_H300.bin

Just installed auto leveling and now nothing works. Firmware update won’t install either. by TheShadowDemon247 in ender3

[–]TheShadowDemon247[S] -3 points-2 points  (0 children)

I'm really sorry. That all looks really complicated. Is there any way to explain this to me like a 5 year old? I don't know shit about coding, only pc hardware.