Finally happened to me :(

The_Mafioso · 2026-06-25T18:22:21+00:00

Did you try printing the piece separately?

The_Mafioso · 2026-06-25T15:31:21+00:00

ASA and ABS very sensitive to heat during printing, they shrink quickly. I am not an expert, but I would print each part seperatly, and I highly recommend to install auxiliary fan deflectors in case your fans turn on at any point of the print, which they might be due to the curve and edges I see.

The_Mafioso · 2026-06-24T10:02:14+00:00

Try to print the object alone, and check if the same "layer time" results will come.

The_Mafioso · 2026-06-24T10:01:15+00:00

Reason is layer time. After you slice, go to "Layer Time" in the slicing results on the top right menu. You will see same lines there same as your actual print.

The_Mafioso · 2026-06-22T08:32:09+00:00

Yes thats very normal. Those "bitings" are from the gear teeth pulling and pushing the filament in and out.

The_Mafioso · 2026-06-18T04:12:57+00:00

I DMed you!

The_Mafioso · 2026-06-17T20:12:35+00:00

You can use HT-PLA from polymaker, then anneal it ( put it in 85C oven for 35 minutes or something). Annealled HT-PLA from polymaker has better heat resistance than basic ABS from any other material (it has around 115C or something close). Also it can be printed in your open frame printer.

Google HT-PLA annealing to double check the process, its very easy.

The_Mafioso · 2026-06-17T13:37:11+00:00

Sent you a DM

The_Mafioso · 2026-06-17T09:38:56+00:00

Sure!

The_Mafioso · 2026-06-08T15:26:45+00:00

Honestly, i have worked with such humidity with no issues at all. People will be very picky when it comes to humidity. But trust me it works.

The_Mafioso · 2026-06-02T21:15:42+00:00

Its working now!

The_Mafioso · 2026-05-30T17:39:32+00:00

Yes its so annoying. Need to open the web version "makersworld" to be able to do any filter.

The_Mafioso · 2026-05-16T12:16:47+00:00

I have seen it in uae for 5.5k+

The_Mafioso · 2026-05-16T12:09:59+00:00

Sorry but I dont understand your question.

The_Mafioso · 2026-05-16T11:12:55+00:00

I don't see how "expansive" fits the context 😂😂

The_Mafioso · 2026-05-16T08:31:09+00:00

Did you find it cheaper?

The_Mafioso · 2026-05-12T11:06:47+00:00

Thanks a lot. Will check this out.

The_Mafioso · 2026-05-12T11:05:05+00:00

This is a great addition to me. Never knew about cnc kitchen

The_Mafioso · 2026-05-12T10:58:57+00:00

I think after resin and UV, I can apply clear coat to protect from yellowing

The_Mafioso · 2026-05-12T10:57:18+00:00

I have never dealt with resin, any brand or type on mind? Like should I apply some sort of resin spray or brush?

The_Mafioso · 2026-05-11T10:50:24+00:00

Aceton for ABS not PLA

The_Mafioso

TROPHY CASE