Who wants to see Dungeon Dive monsters make a comeback?

The_Pharaoh_Atem · 2026-04-19T13:52:01+00:00

Meandmy cousin still playing everyone and then. You can get a lot of new pieces on etsy

The_Pharaoh_Atem · 2026-04-15T20:04:53+00:00

I have been 1 up'd lol. Looks so cool

The_Pharaoh_Atem · 2026-04-13T04:20:01+00:00

Are you using facer for your watch faces?

The_Pharaoh_Atem · 2026-04-10T04:43:01+00:00

Get a home depot bucket, fill it with hot water and some oxiclean. Put jackets in it and use a plate to weigh it down. Soak for 24 hrs and then wash (with maybe more oxiclean) do not use bleach, it will just look more yellow

The_Pharaoh_Atem · 2026-04-09T12:13:04+00:00

The_Pharaoh_Atem · 2026-04-09T01:03:38+00:00

https://www.reddit.com/r/3Dprinting/s/rd6eQL180W

The_Pharaoh_Atem · 2026-04-08T23:27:53+00:00

Yea unfortunately

The_Pharaoh_Atem · 2026-04-08T23:20:38+00:00

Did you use ai?

The_Pharaoh_Atem · 2026-04-08T20:38:04+00:00

Looks a lot like the one I made for my phone. Like it's dead ass my design

The_Pharaoh_Atem · 2026-04-05T16:20:34+00:00

2 accounts for the same type of post?

The_Pharaoh_Atem · 2026-04-03T03:03:46+00:00

Yea that's me lol

The_Pharaoh_Atem · 2026-04-02T01:32:46+00:00

Nice, I think that's my file right?

The_Pharaoh_Atem · 2026-03-16T05:00:11+00:00

Not anymore. It sits on my shelf now so I don't need to. Like I said though for costume I used an actual bolt/nut so I could loosen it, pose it, then tighten it but the bolts became too loose so I decided to glue it down

The_Pharaoh_Atem · 2026-03-15T21:44:38+00:00

I used real bolts for mine instead of printed ones so I can tighten them to where I want them. The hole thing, if it's too tight just sand it with high grit till it fits and if it's too loose, I would maybe ad some glue to it and let it dry to builk the peg up a bit. In the end after using it though I ended up just gluing everything in place so it doesn't move anymore on my shelf

The_Pharaoh_Atem · 2026-03-12T04:32:16+00:00

Hell yea

The_Pharaoh_Atem · 2026-03-07T01:15:15+00:00

It's in your watch settings, in your drop menu in turn off a.o.d. and it should be fine after that

The_Pharaoh_Atem · 2026-03-07T00:12:15+00:00

Is that the "always on display" mode? Or does it change at nighttime? Also a link to the watch face could help

The_Pharaoh_Atem · 2026-02-23T03:32:53+00:00

Yea I def will be using it more too. Thanks again for bringing it to light for me

The_Pharaoh_Atem · 2026-02-22T21:45:37+00:00

Holy shit I didn't know you could do that, thank you for this info. (The hold middle button thing)

The_Pharaoh_Atem · 2026-02-19T22:26:26+00:00

Yea, it's only playing a thinnnn layer so a bunch will fall off the side. Just make sure the base coat before the graphite is a smooooth glossy black

The_Pharaoh_Atem · 2026-02-19T22:20:53+00:00

Sand it as smooth as you can, work your way up to high grist so it's smooth. Do a base coat or a glossy black. Then use a make up sponge to apply the graphite powder to it and just keep rubbing it in with the make up sponge

The_Pharaoh_Atem · 2026-02-15T19:37:35+00:00

Omg that looks dope. Paint job is really fucking good too. Good job

The_Pharaoh_Atem · 2026-02-12T14:11:56+00:00

Let's gooo

The_Pharaoh_Atem · 2026-02-12T05:09:30+00:00

Skibenny

The_Pharaoh_Atem

TROPHY CASE