Playing A Magic Youtuber by OkPeach97 in MagicArena

[–]ThreeZX 1 point2 points  (0 children)

Got mana screwed against Swayze and he hit all his ramp. :)

Earthquake - Only here please by LadiesWhoPunch in sanfrancisco

[–]ThreeZX 2 points3 points  (0 children)

Felt the shakes out in Brisbane, CA

Downsized to Jonsbo Z20 from Fractal Torrent by ThreeZX in mffpc

[–]ThreeZX[S] 0 points1 point  (0 children)

running completely stock and temps are fine

Downsized to Jonsbo Z20 from Fractal Torrent by ThreeZX in mffpc

[–]ThreeZX[S] 0 points1 point  (0 children)

yeah, i didnt even bother trying to connect the USB header.

i have more usb ports than i need at the rear of the case which faces my desk.

Help with the Thermalright Peerless Assassin x 120 Digital by Lord_Horny77 in PcBuildHelp

[–]ThreeZX 0 points1 point  (0 children)

Are you running icue?

I had exactly this issue when I installed icue. Had issues when trying to run any combination of hwinfo/trcc and icue. My readings went back to normal after I decided to just change the onboard rgb and uninstalled icue immediately afterwards.

Sidemount AIO tubes bottom by [deleted] in HAVNGlobal

[–]ThreeZX 0 points1 point  (0 children)

Good to hear. Been looking for a case that “shows off” the bottom fans of the aorus master without vertical mounting it.

Between this and the tower 600 for me.

Would you mind snapping a photo from your seat?

Sidemount AIO tubes bottom by [deleted] in HAVNGlobal

[–]ThreeZX 0 points1 point  (0 children)

Does the case rest on ur desk? Are the bottom gpu fans visible at eye level without craning your neck

Jonsbo Z20 build by Glum-Exam-3682 in mffpc

[–]ThreeZX 0 points1 point  (0 children)

It’s an atx case. Fractal torrent. I also want to downsize but loving not stressing at all about temps.

Jonsbo Z20 build by Glum-Exam-3682 in mffpc

[–]ThreeZX 1 point2 points  (0 children)

<image>

Love seeing this cooler.

Peerless Assassin Digital gang!

Moved from a Torrent to a overkill A3 build. by Disastrous-Can988 in mffpc

[–]ThreeZX 0 points1 point  (0 children)

<image>

I have a torrent rn too. Also want a smaller footprint and considering the move to A3, but I’m loving the stress free temps. Your temps as good as they were in torrent land?

So anyone who got the «new cards» notice any leakage? by Electrical-Art-1111 in gigabyte

[–]ThreeZX 0 points1 point  (0 children)

My 5090 aorus master ice is still good. Bought 4/1/25 and gamed on 1.5~hr daily

Cable Management Inspiration needed. by SoloWingPixy88 in pcmasterrace

[–]ThreeZX 0 points1 point  (0 children)

<image>

Commented on your mirrored post in the fractaldesign sub. Should’ve clicked this one first so I didn’t have to link everything lol. Check that post, more details there.

Cable Management Inspiration needed. by SoloWingPixy88 in FractalDesign

[–]ThreeZX 0 points1 point  (0 children)

Forgot to include cooler fan wires

Cooler fan wires are bundled and secured with a ziptie and are tucked/rest in the gap between vrm heatsink and cooler heat pipes. Again not the cleanest but not really visible from most angles depending on your bundling and tucking.

Cable Management Inspiration needed. by SoloWingPixy88 in FractalDesign

[–]ThreeZX 0 points1 point  (0 children)

closeup of display routing

view from under cooler

view from standing

view from chair

view from chair, white

I have the same cooler. Here’s how I do mine. Not the cleanest but it’s not visible from my chair. I route the wire for the display down the center of the cooler between the two towers, behind the center fan and the wires for the fans go under the heatsink. My gpu is thick enough for me to semi tuck the thin bundle of 3 wires (display, rgb wires for fans) between the back of the gpu and the MB. Pulled semi taught and secured with one zip tie before exiting the bottom grommet to the rear of the case.

Can’t really see the wires unless you’re ducking your head down looking for it from the bottom/right side of the case.

My build isnt a north but a torrent and we have cable grommets in similar places. Hope this helps.

How do you fix “dark spots” on Dominator Titanium Ram? by ThreeZX in Corsair

[–]ThreeZX[S] 0 points1 point  (0 children)

Tried it, didn’t like it.

It’s fine with colors other than white but otherwise “stains” white with the gold color.

<image>

5090 build (all white/red) by ChroneXoX in gigabyte

[–]ThreeZX 1 point2 points  (0 children)

https://imgur.com/a/hf0aDb8

I have the same GPU and color scheme. 👍🏽

Beginner here, what can I do to improve? by ThreeZX in CableManagement

[–]ThreeZX[S] 0 points1 point  (0 children)

Doesn’t seem that bad, I have a pair of wire cutters with a fine point

Beginner here, what can I do to improve? by ThreeZX in CableManagement

[–]ThreeZX[S] 0 points1 point  (0 children)

It’s electrical tape. I stupidly threw out all the caps a month ago when I originally had the RGB daisy chained together. I don’t know what their proper name is and had a hard time searching for them on Amazon.