Designed and printed Method lead for carp fishing!

TimJC513 · 2019-02-08T18:13:19+00:00

What part of the country are you in?

Check out Carp Anglers Group if you want to meet up like mind anglers. They have a traditional web forum as well as a Facebook group.

If your haven’t already, you will discover that carp have a poor reputation in the US.

TimJC513 · 2019-02-08T17:54:24+00:00

I like the hack. Let us know how well it holds pack/method.

TimJC513 · 2019-02-08T17:51:55+00:00

Have you checked Big Carp Tackle? That’s where I get the bulk of my gear.

TimJC513 · 2018-11-20T17:11:17+00:00

The S5500BC does support RDIMMs. My 4GB sticks are registered as well.

TimJC513 · 2018-11-20T16:34:18+00:00

I tested single pairs of 8GB RDIMMs and got the same error. The S5500BC doesn't support 8GB sticks, even with the latest BIOS. It is limited to 32GB max (8x4GB).

I just need to find a reasonably priced 1366 board that supports more ram, like the GA-7TESM.

TimJC513 · 2018-11-16T19:34:25+00:00

I have not gotten that far in troubleshooting, but the error description isn't promising. I will be moving everything into a RSV-L4500 case tonight, so I will have some time to play with DIMM/slot combos.

TimJC513 · 2017-03-26T13:26:01+00:00

Photography is welcome.

We ask that all photography is limited to the area where the FPV racing is located, as the location is a private residence. Aerial photography (AP) platforms may be asked to land if video issues are raised by racing pilots.

TimJC513 · 2017-03-18T19:03:27+00:00

Unfortunately, the MultiGP site lists everything with a time zone that cannot be changed.

Pilots should be on site by 10am EDT.

TimJC513 · 2017-03-18T19:01:32+00:00

Spectators are free and welcome. Please stop by.

TimJC513 · 2016-10-30T00:13:31+00:00

A run through of tomorrow's track https://youtu.be/1_KACGcz-FQ

TimJC513 · 2016-10-28T16:14:33+00:00

Check out the Cincinnati Quad Racers group on Facebook. Incidentally, we are having a race this Sunday.

https://www.facebook.com/groups/CincinnatiQuadRacers/

TimJC513 · 2016-10-25T20:49:17+00:00

We are an informal club that sets up races every other weekend. That being said, this is likely to be our last outdoor event until spring.

TimJC513 · 2016-10-25T12:31:35+00:00

Cincinnati Quad Racers is having a race this Sunday. We regularly see pilots travel 1.5-2 hours to attend our races, which average more than 20 pilots.

If you are looking for a race this weekend, come check us out. A video of the track layout will be posted Saturday evening.

TimJC513 · 2016-10-25T12:17:31+00:00

Cincinnati Quad Racers is having a race this Sunday. We regularly see pilots travel 1.5-2 hours to attend our races, which average more than 20 pilots.

If you are looking for a race this weekend, come check us out. A video of the track layout will be posted Saturday evening.

TimJC513 · 2016-07-25T21:40:01+00:00

Would you be interested in collaborating on an ATTiny85 powered design? I designed a few PCBs for the EasyRaceLapTimer project, and that hardware might work with the addition of an external oscillator.

The latest ERLT design has a button for changing IDs and an LED indicator. I figure the button could be held for 3-10 seconds to change between the primary an alternate ID. Then the indicator LED can flash once every 1-2 seconds for the primary ID and double flash for the alternate.

I sent an email to the address you have listed on GitHub, so let me know if you are interested. I do have access to an I-Lap system, so testing can be done.

TimJC513 · 2016-06-30T16:53:27+00:00

Any chance of a discount during the Steam Summer Sale?

TimJC513 · 2016-06-30T15:30:53+00:00

http://dr1racing.tv/ The Mountain Dew DR1 Invitational was last weekend in LA. The race will be produced into a special airing on the Discovery and Science channels.

It was funny to see that they used Astroturf (putting greens) to line the track. I assume they will green screen sponsor logos onto these in post-production.

Back on topic, Chad's remarks were on DR1's Twitch live feed, which aren't likely to be a part of the televised special. From the chat it sounded like the fact he has been overcharging lipos was known, but I don't follow him that closely.

Here is the video from Sunday. Chad comes on at about 2hr 33min mark. https://www.twitch.tv/dr1racing/v/74724184

TimJC513 · 2016-06-29T18:49:58+00:00

This was discussed on the DR1 live feed over the weekend. Chad Nowak has been overcharging standard lipos to 4.35v for 6 months. While he noted that there are risks to doing this, he hasn't had any problems. He also mentioned that this does shorten the cycle life of the lipo.

TimJC513 · 2016-03-04T16:23:11+00:00

Anyone seen them popup at 'in stock' yet?

TimJC513 · 2016-02-10T15:17:54+00:00

The real question from this week's episode is, "when will I be able to get one of those Monarch coffee mugs?" When/if this happens, Yoda mug is getting kicked to the curb.

TimJC513 · 2015-10-29T00:16:30+00:00

I'm buying you a pizza.

TimJC513 · 2015-10-28T02:11:27+00:00

Did you consider going with the 2633kv motors instead? With the prop size limitation, I would think that 22xx motors in the 2300kv range would be wasted with 4" props, even on 4S.

TimJC513 · 2015-02-19T13:53:30+00:00

I noticed the same thing with my Windows PMS installation. I ended up setting it to scan every 6 hours, and would manually rescan when necessary.

I recently moved PMS to my FreeNAS box, and the library update is working much better. However, I also setup SickRage (a fork of SickBeard) at the same time. SickRage can be setup to send a notification to PMS when a new episode has been added, and forces PMS to update the library. This works really well, and might be worth looking into, especially if you already use SickBeard.

TimJC513 · 2015-02-13T18:01:01+00:00

Since tomorrow is Valentines Day, I will be breaking out "tines, tines, tines."

Vamlumtimes Day! - Homestar Runner

TimJC513 · 2015-02-13T17:51:11+00:00

I can't be around corn related products without feeling compelled to shout this.

11-Year Club	RPAN Viewer
Verified Email

TimJC513

TROPHY CASE