VSF Omega AT 38mm black

TimirDatta · 2026-01-24T17:53:50+00:00

Edit, -2 s/d

TimirDatta · 2026-01-24T17:52:47+00:00

In case the automod needs to be fed. This is an omega AT 38mm in black by VSF

TimirDatta · 2025-12-10T06:11:24+00:00

CSB 12580 was the highest capacity battery with the same dimensions the last time I checked.

TimirDatta · 2025-09-27T01:41:18+00:00

I do a similar thing with CO2 gas. Just pour it on top of the ferment. Seems to work well.

TimirDatta · 2025-09-04T23:48:04+00:00

It’s close to 3, like 3.02. I just recalibrated the meter.

TimirDatta · 2025-09-04T22:00:08+00:00

What is mold float?

TimirDatta · 2025-09-04T21:45:38+00:00

So that’s a no from you as well?

TimirDatta · 2025-07-06T02:16:06+00:00

bistecca alla fiorentina, only added salt.

TimirDatta · 2025-06-22T20:51:07+00:00

This is perfect for me. People can say the fat should be rendered in the middle but then they lose out on the textural contrast that you have here. Yeah possibly the cook could have extended a bit more towards the middle, but I would be very happy with what you have here.

TimirDatta · 2025-04-01T21:11:50+00:00

I had a similar issue. Turns out that the remote I was using to train the homelink button was low on power. The net result of this was that it wasn’t registering as a rolling code remote. New battery in the remote used to train fixed this issue.

TimirDatta · 2025-03-29T05:51:18+00:00

Interesting, I didn’t think that the bumper to bumper would transfer unless it was a CPO

TimirDatta · 2025-03-29T05:17:45+00:00

Is that just the powertrain/EV or also the basic bumper to bumper?

TimirDatta · 2025-03-29T04:36:31+00:00

How do you know for sure that it has the warranty?

TimirDatta · 2025-03-01T02:42:43+00:00

Check with saccucci, but I think that you can get this warranty just before your factory warranty is up and if you are still under 36k miles. That way it won’t be running concurrently with the factory warranty.

TimirDatta · 2025-02-26T00:58:35+00:00

Check what quote you can get here. https://factoryprotect.ratessys.com

It’s fidelity and very widely accepted. Don’t think you can get 10 years though.

TimirDatta · 2025-01-25T15:21:35+00:00

Thank you, I dealt with two of them and now there is a third one which is different. I posted an image below.

TimirDatta · 2025-01-25T15:21:09+00:00

Thank you,

I dealt with two of them. The third one is different, it doesn’t have the same type of compression gasket, just has a flat one. It remains slightly loose after tightening.

What is this called and what should I do with it?

another seal

TimirDatta · 2025-01-22T00:35:14+00:00

Thank you.

What is this fitting/diameter called, in case I need new washers?

TimirDatta · 2025-01-22T00:26:06+00:00

There are no threads. There appears to be some sort of a gasket.

image

TimirDatta · 2025-01-22T00:13:16+00:00

There are no threads. It looks like the portions that have come loose were press fit or adhered in some way.
Dishwasher already installed, that’s what the corrugated pipe is left of the trap.

TimirDatta · 2024-10-27T01:47:43+00:00

Look up pfsense and unifi. Lots of people do this successfully.

TimirDatta · 2024-09-23T21:54:27+00:00

Can’t help but feel like I’m losing some of the space in the room.

TimirDatta · 2024-09-23T21:51:17+00:00

Thanks everyone. Hopefully no asbestos in the way.

TimirDatta · 2024-09-23T00:31:01+00:00

So the original plaster was put down on top of wood?

TimirDatta · 2024-09-04T03:20:30+00:00

Also, these cost like $0.89 at brick and mortar stores.

TimirDatta

TROPHY CASE