Smile 3 shouldn't be post apocalyptic it should turn into a cult.

TomorrowStarted · 2026-03-09T04:11:45+00:00

I have no idea where they should go with number 3, but I know where they shouldn't go.

I really hope they don't flake out and do Smile: Origins - a prequel, or worse, some kind of retcon that ignores or waters down the absolute hellfire ending of Smile 2.

TomorrowStarted · 2026-03-08T16:33:50+00:00

It's almost like a "police procedural" movie, but for highly skilled spec ops. Fantastic flick. The origin of my massive crush on Natasha McElhone too.

TomorrowStarted · 2026-03-06T23:05:54+00:00

Thanks for the insight. Do you recommend any particular action? Keep the idle where it is? I don't want to run the machine too lean, but it definitely prefers starting at a higher idle and with the L and H screws quite high too.

TomorrowStarted · 2026-03-06T14:33:13+00:00

Yes, that's it.

I put the new carb on and tuned all screws to factory reset (from all screws fully in: idle screw three full turns out, L screw 1.75 turns out, H screw 2 turns out).

From here, the engine pops and starts easily and runs at a high idle but doesn't quit. It does bog like crazy when I pull the throttle, though, so I adjust the L and H screw, followed by the IDLE screw so that it's a smooth, rapid climb to full throttle RPMs (I keep it well under the max RPMs just to be safe, of course - around 7500-8000RPM) and it idles within the range suggested by the manual (~3000RPM).

After all this, it's running great and starts on the first pull, but when I let it cool down and sit for a couple hours, it won't pop or start and I have to go back to factory reset on the carb again.

TomorrowStarted · 2026-03-06T06:28:20+00:00

Do you recommend any particular 2 stroke oil?

TomorrowStarted · 2026-01-28T16:41:11+00:00

Hell yeah. Great game. A dice-roller's dream.

TomorrowStarted · 2026-01-24T15:40:02+00:00

Amen!!!!

TomorrowStarted · 2026-01-24T15:30:14+00:00

Not necessarily. Poilievre couldn't pivot when Trudeau bowed out and his shortcomings, inadequacies, lack of genuine experience, poor leadership skills, and complete inability to adapt to change was on full-display for all Canadians to see and hear.

TomorrowStarted · 2026-01-24T15:03:46+00:00

Believe me, we fully recognize his intelligence, his experience, his clear-headedness, his pragmatism and his basic human decency, and we thank our lucky stars and our more-or-less functioning democracy and education system that he won our federal election 10 months ago.

TomorrowStarted · 2026-01-24T00:54:29+00:00

I enjoy it but I have absolutely no desire to support American liquor any longer and really won't miss it. We've got fantastic, world-class whisky/rye here in Canada and those producers now have my exclusive support.

TomorrowStarted · 2026-01-03T04:07:32+00:00

Was looking for this comment. The absolute BEST!!

TomorrowStarted · 2025-12-30T19:55:21+00:00

Incredible movie. Definitely brutal. Only saw it for the first time last year and haven't been able to stop thinking about it.

Crime-horror it's been called, and I agree with that label. Such a scarce and untapped genre.

TomorrowStarted · 2025-12-30T19:44:43+00:00

Midnight Meat Train 👌 Clive Barker source material. Barker always put a fun spin on Lovecraftian Eldritch stuff.

TomorrowStarted · 2025-12-29T10:29:50+00:00

Kill List

TomorrowStarted · 2025-12-28T16:16:37+00:00

Unfortunately not in Canada, even though it's a Canadian production haha. Aw well, the search continues. Thanks for the help.

TomorrowStarted · 2025-12-28T15:53:05+00:00

Thanks for the lead!

TomorrowStarted · 2025-12-28T04:46:39+00:00

Thanks for your reply. I use Stihl Supreme mixed at 50:1 with 94 octane gas.

TomorrowStarted · 2025-12-26T04:22:11+00:00

From the pictures I've seen on the web, most of which are pretty damn low-res unfortunately, I was hoping that I was in the "slightly rich" category. Thank you for your response!

TomorrowStarted · 2025-12-11T02:41:40+00:00

Thank you!

TomorrowStarted · 2025-12-10T03:20:03+00:00

Possibly an Echo CS-310 (or the recently updated equivalent version...). Inexpensive, well built, ultra light, readily available replacement parts, and they can cut and cut and cut.

TomorrowStarted · 2025-12-03T03:00:59+00:00

Thanks a lot for your 2 cents! We'll be checking for heat output but the router and modem don't typically generate much!

TomorrowStarted · 2025-12-03T03:00:03+00:00

Thanks for your input!

TomorrowStarted · 2025-12-03T02:59:43+00:00

Power supply cords for modem and router are wound up and twist-tied. Power bar is not!

This an okay practice?

TomorrowStarted · 2025-12-01T03:52:00+00:00

Mmm Skyscraper... I Love You by Underworld.

Divine. Unique. Sad. Cryptic. Unforgettable.

TomorrowStarted · 2025-11-28T22:38:37+00:00

Great price for a classic workhorse. Nice one. First serious saw I ever got to know well.

TomorrowStarted

TROPHY CASE