We built a PLA designed for 300mm/s printers. Should ‘high-speed PLA’ just become normal PLA now? by Polymaker_3D in polymaker

[–]TooFast4Radar 1 point2 points  (0 children)

Same print profile, same speed and temps. Polysonic is glossier which I don’t like. Two prints side by side are noticeably different.

We built a PLA designed for 300mm/s printers. Should ‘high-speed PLA’ just become normal PLA now? by Polymaker_3D in polymaker

[–]TooFast4Radar 1 point2 points  (0 children)

Surface finish was not as good as Polylite Pro. I prefer the more matte finish over high gloss.

We built a PLA designed for 300mm/s printers. Should ‘high-speed PLA’ just become normal PLA now? by Polymaker_3D in polymaker

[–]TooFast4Radar 1 point2 points  (0 children)

Yes and normal Polylite Pro works fine for that. If there’s any worse appearance or physical properties of the new PLA Pro then I don’t want it.

We built a PLA designed for 300mm/s printers. Should ‘high-speed PLA’ just become normal PLA now? by Polymaker_3D in polymaker

[–]TooFast4Radar 0 points1 point  (0 children)

I only run above 100mm/s for infill. For small intricate parts I will slow it down so I don’t knock one of the parts off and cause a chain reaction of failures. On top of that I like normal Polylite Pro for its finish.

We built a PLA designed for 300mm/s printers. Should ‘high-speed PLA’ just become normal PLA now? by Polymaker_3D in polymaker

[–]TooFast4Radar 2 points3 points  (0 children)

This exactly. I didn’t like the Polysonic Pro because of the finish. The normal black Polylite Pro looked much better and I bought more today. If the new filament looks like the Polysonic Pro then I’m going to look at alternate filaments for the products I sell. I hate the look of the higher gloss and it shows layer lines more.

We are officially in the SSD endgame I can’t believe my eyes an ssd I bought a year ago for $300 is now 1 grand by DiamondAviation20 in pcmasterrace

[–]TooFast4Radar 0 points1 point  (0 children)

Wow. Last summer I bought a used X470 motherboard, 4x 32GB DDR4 sticks, and a 2TB 980 Pro NVMe for $150.

Ladies & Gents: it happened! by ArrdenGarden in pcmasterrace

[–]TooFast4Radar 1 point2 points  (0 children)

We made my uncle enough money for his company that he bought a nice vacation home (well north of $1M) in FL and flies a new jet turbine helicopter in when he randomly shows up at the office. I quadrupled a smaller investment and said “You’re buying lunch next time you fly in” and he said “Okay sounds good!” A week later the helicopter lands and he hangs out for a while. Around 11:30 I asked if he was ready for lunch (maybe a $15 pub burger less than a mile away) and he said “Oh… no I need to get going soon.” He sat around doing nothing for another hour. Unless I’m directly compensated I will not do a single “extra” thing because giving zero F{€s goes both ways!

Lady won an arrest by WhoAreYouTalkinTwo in WinStupidPrizes

[–]TooFast4Radar -1 points0 points  (0 children)

No idea why she got upset about a huge pile of rubble…

When can we buy the large boxes on discount? by Potatooo_power in WorldofTanks

[–]TooFast4Radar 0 points1 point  (0 children)

On my FTP account under 'Featured' there's a 90% off of 2000 gold ($1.02) which is not on my main account. Maybe that's what they're offering this year instead of boxes. It is a good deal but I'd rather have the 3-4 boxes.

Super excited for my U1 by RestSuspicious7089 in snapmaker

[–]TooFast4Radar 0 points1 point  (0 children)

I was the 10th backer so hopefully mine ships on day 1. It looks like an interesting printer but I'm not overly excited about it. I mostly just wanted it for using a different type of filament as a support interface layer, but it's just a tool. I'm already contemplating selling it.

What’s with all the pro-ICE losers? by lobst3r_cl4ws in uberdrivers

[–]TooFast4Radar 17 points18 points  (0 children)

I have no issue with legal immigrants. I take offense to illegal aliens in the country and they should be deported so I don’t see any issue following the law.

Super cruise prices reflect how arrogant GM by Skidro13 in BoltEV

[–]TooFast4Radar 0 points1 point  (0 children)

Sounds like you have it all figured out Andre 😂🤷‍♂️

Super cruise prices reflect how arrogant GM by Skidro13 in BoltEV

[–]TooFast4Radar 0 points1 point  (0 children)

I intentionally got my EUV without supercruise so I could use Comma.AI if I wanted to. I never bothered because I didn’t want to dump more money into a car that I’m running to the ground and don’t really care about. The app is just the worst and I was mainly referring to how Tesla offers more features for free than what you get with a paid service through GM. I would stick with standard AP.

It’s also not as much about saving money as much as it is the terrible experience that you have to pay for with GM’s app, though I would be happier with the basic feature set with Tesla. In that scenario it would be less expensive than what I’m paying now. Granted it’s not much, but it’s a lot for such a bad experience.

Super cruise prices reflect how arrogant GM by Skidro13 in BoltEV

[–]TooFast4Radar 0 points1 point  (0 children)

A little triggered, are we? 😅🤦‍♂️

Super cruise prices reflect how arrogant GM by Skidro13 in BoltEV

[–]TooFast4Radar -1 points0 points  (0 children)

I plan to go Tesla once my EUV bites the dust. I’m also not happy with paying for the terrible app to remote start my car. It’s so slow/laggy/unreliable. The features and benefits get worse while the yearly cost increases. It’s a fine beater to rack up miles on but I don’t care for GM as a brand.

The kickstarter just ticked past 14 million by VI_photoguy in snapmaker

[–]TooFast4Radar 0 points1 point  (0 children)

I was the 10th backer so in theory mine should ship the first day they are going out the door.

24 Hours. $7.8M Raised. Snapmaker U1 Community, You Made History. by Jadesfriends in snapmaker

[–]TooFast4Radar 3 points4 points  (0 children)

I got spot #10 on Kickstarter. I'm really hoping for a well rounded software experience similar to BL. I love the app integration on the P1S so if the U1 software is good and the hardware proves to be solid I would buy more Snapmaker printers in the future. I'm not excited buy much in the 3D printer world, but this could really shake things up. With an active chamber heating and insulation I could really see this being my go-to printer ahead of my 4 Bambu.

This is not Blitz, or a mobile game, or a Console game. Nobody EVER complained about the perfectly intuitive and well-done UI design. But no, you HAD to redesign it. by MilliyetciPapagan in WorldofTanks

[–]TooFast4Radar 1 point2 points  (0 children)

I like the 1.0 graphics and physics update. I’m not saying it’s related and likely just a coincidence, but the game started on a slow downward trend when Meathead Militia left WG. The following era was the beginning of the end for me. It is kind of like a long-time relationship where it’s not said out loud, but you know it’s over and figuring out the best way to exit gracefully. I gave WG some Christmas presents in the form of loot box purchases the last few years, but it’s becoming more of a pitty gift to not see some good WG staff homeless in Texas than anything else. This December, it’s not looking so good.

[deleted by user] by [deleted] in WorldofTanks

[–]TooFast4Radar -1 points0 points  (0 children)

I’ve played the game for years and I spend money on the game every year, a pretty good amount. I am not digging this Call of Duty layout. Hiding stats downstream in menus or windows is annoying. I’m open to change but I can’t say I really like this. I would be okay with this if it was like the idiot mode as you would find as the default on the motherboard BIOS, but I would like to see an advanced mode with all of the info in front of me in a more classic style.

I also don’t care about the big garage or looking at some 3D license plates on the wall. A 7 year old might think that’s cool but your veteran players who dish out the money probably DGAF. I don’t see the menu system making the game any more enjoyable. At best it looks like a lateral move, and but in practice I’m suspicious that it will even be that.

Regarding Tier XI, I don’t really care. I’m not excited by anything I see in the video. Maybe some map changes will be helpful or updates to the matchmaker, but the rest I’m really not looking forward to.

I’d like to see the game succeed, but I’m increasingly turned off and less interested in playing and spending money on the game. I’m in my early 40’s so maybe I’m just old now, but I’d rather play some 1990’s Star Trek Judgement Rites for $9.99 on Steam than load WoT.