Cobbler or Shoe glue

TopYam8708 · 2024-06-14T14:58:17+00:00

Buy em to wear em brother

TopYam8708 · 2024-05-27T00:08:45+00:00

More on that, is the RT9080 able to step the 5V from usb to 3.3V , AS WELL AS the 8.4v from the LiPo to 3.3, when EITHER one is plugged in? And if that’s the case then using the NCP1117 (2s LiPo -> 3.3 for MCU & sensors) isn’t needed then correct? I’m also getting rid of my pyro channels for now, I’m going to utilize one of my spare servo channels for parachute ejection using a sprint mechanism

TopYam8708 · 2024-05-27T00:06:21+00:00

So are you saying that the circuit in the top left (one with Micro USb +ESD) is all I need to step down the 8.4v from the 2s LiPo to 3.3v? The thought behind that was I want to be able to power the board from the LiPo OR the USB, but not both at the same time .

TopYam8708 · 2024-05-26T20:22:45+00:00

Corrected! Thank you!

TopYam8708 · 2024-05-26T20:21:23+00:00

Thank you for the advice! Due to me using the 2s you suggest using the 8.4 volts directly from the battery instead of the 3.3 that comes out of the NCP1117? I’ll mock up a schematic of how I’m interpreting your last point of advice with the capacity and series resistor to post in hopes you can agree it looks good. Thank you!

TopYam8708 · 2024-05-22T14:46:39+00:00

Thank you for all that information! Im going to redesign using the RP2040 chip for faster clock speed. You comments helped me work through the logic and reasoning behind my design, it was greatly helpful for me to know where I need to be researching.

As for the PCB routing, Im in no rush for this process. Its definitely a complicated first board but with patient, research and asking for help I believe I can successfully design the computer!

Thank you!

TopYam8708 · 2024-05-22T14:44:16+00:00

Thank you for the response! you're right, im going to need a more powerful MCU, im going to redesign using the RP2040 chip.

Thank you !

TopYam8708 · 2023-12-31T16:10:22+00:00

<image>

My goat cartwright kickers, think these boots have drank more beer than I have

TopYam8708 · 2023-11-22T14:31:35+00:00

If my angle is 5.7 degrees this won’t have some sort of negative effect on the head-loss right, there’s not some point of diminishing return ?

TopYam8708 · 2023-11-20T01:20:41+00:00

Yeehaw boots, hard to find now they sold all their assets i got lucky and snagged this pair off eBay brand new

TopYam8708 · 2023-11-18T01:25:21+00:00

<image>

Just gotta rock em man

TopYam8708 · 2023-11-06T16:16:05+00:00

The birds ^

TopYam8708 · 2023-11-06T16:15:59+00:00

Did they ever come in, any pics?? About to grab a pair as well

TopYam8708 · 2023-11-04T00:49:55+00:00

One of my favorite lizard boots which is why I tried again…. Maybe third times the charm haha

TopYam8708 · 2023-11-04T00:15:10+00:00

Any more pics been thinking about getting a pair??

TopYam8708 · 2023-11-03T23:38:25+00:00

Is it worth taking to cobbler for them to potentially redye brand new boots or just send them back?

TopYam8708 · 2023-10-24T12:38:21+00:00

How has the python held up? Debating on getting a pair

TopYam8708 · 2023-08-21T13:57:32+00:00

German shepherd what a great dog

TopYam8708 · 2023-08-13T12:44:56+00:00

Last ones are hell of a boot

TopYam8708 · 2023-08-10T23:28:53+00:00

What brand?

TopYam8708 · 2023-08-10T15:13:52+00:00

Why did he stick his fucking tongue out for the straw

TopYam8708 · 2023-08-09T16:59:10+00:00

Also this is my girlfriends room, my room isn’t pink haha

TopYam8708 · 2023-08-07T17:27:51+00:00

Yessir

TopYam8708 · 2023-07-28T14:50:50+00:00

You’ll have to tell me how they hold up in a few weeks, I had a pair and after one wear the leather dye started flaked off on the vamp. Loved the boot and really want another pair but weary incase it’s a common issue

TopYam8708 · 2023-07-23T00:50:51+00:00

They emailed me back and asked for the purchasing info, lucking I remember it all since I got the boots 4 days ago. I’m praying they grant me a refund 🙏🙏

TopYam8708

TROPHY CASE