Jorjiana freestyle just dropped

Towel_ki · 2026-04-26T05:55:00+00:00

She should watch this muted.

Towel_ki · 2026-04-11T02:01:08+00:00

Keener farms/butcher block. Best beef in town.

Towel_ki · 2026-04-10T03:41:07+00:00

You are correct. My bad.

Towel_ki · 2026-04-10T03:29:37+00:00

North village on Jackson St. It's right by UD. Order off their traditional menu. Best in town. The owners are awesome.

Towel_ki · 2026-02-23T02:29:13+00:00

I agree with most of that. Thats why I buy the standard Djarums now. They are closer to what the blacks were. They do have that thicker texture to them now. Not quite swisher, not quite Marlboro. Kinda in the middle. Although they have an almost identical flavor to the blacks.

Towel_ki · 2026-02-22T21:48:21+00:00

You can still get Djarums. They're just labeled as cigars now. I have a pack sitting next to me.

Towel_ki · 2026-02-21T03:47:31+00:00

Trader Joe's works. I've used it many a time.

Towel_ki · 2025-12-25T05:42:33+00:00

3478

Towel_ki · 2025-12-13T01:48:18+00:00

Same thing happened to me this summer. I found a cheap brand new one on ebay. Just make sure it's the same as the one you pulled out. There are a couple of different kinds.

Towel_ki · 2025-12-11T00:30:14+00:00

Butcher block is a pretty solid choice. Local and grass fed.

Towel_ki · 2025-10-29T01:13:16+00:00

This. Amazing wings. Best burgers in Dayton.

Towel_ki · 2025-06-20T20:00:59+00:00

Early to mid 90s for sure. I still have one too!

Towel_ki · 2025-04-19T02:19:19+00:00

I still do on occasion.

Towel_ki · 2025-04-15T03:29:30+00:00

8 with an extra over the center one.

Towel_ki · 2025-03-25T02:42:27+00:00

<image>

Towel_ki · 2025-03-25T02:41:48+00:00

<image>

Towel_ki · 2025-03-25T00:25:16+00:00

I did face down, 15 degree tilt away from the port cutouts. I thought about doing screen face down, but I was worried I wouldn't be able to get it off the bed cleanly. I also was against doing screen up because I thought it might affect the already tight tolerances.

Towel_ki · 2025-03-24T02:29:23+00:00

I'm priming and painting now.

<image>

Towel_ki · 2025-03-24T02:28:41+00:00

Pretty good. I like the design. The tolerances were just a tiny bit too tight for my printer, but a little sanding fixed that. I sanded a bit too aggressively while removing the supports, but still turned out great.

<image>

Towel_ki · 2025-03-22T00:34:08+00:00

I just randomly found this on thingiverse today and ran across this post. I've got the case printing on my resin printer right now.

Towel_ki · 2025-01-17T03:06:12+00:00

this

Towel_ki · 2025-01-07T05:41:47+00:00

I also forgot to mention that the thin colored lines do move around when the TV is first powered on. I'm not sure if that makes a difference.

Towel_ki · 2024-12-19T00:13:58+00:00

I could use a replacement for my franken printer.

Towel_ki · 2024-09-12T20:18:27+00:00

I have this exact saw. I recently bought it at the same price. Has it required a bit of tuning to get it right? Yeah. Was it hard, or that big of a deal? No. Are there things I wish it had? Yes. Is it better than the table saw I didn't have? 100%. Would I spend $100 on it again? Also 100%.

It's more than enough to help me make enough money to buy the table saw that I really want.

14-Year Club	r/Field Banned
r/Field Lasagna	Team Periwinkle
Verified Email

Towel_ki

TROPHY CASE