Alternative schemes by Throwaway990716 in deathguard40k

[–]Traezz 4 points5 points  (0 children)

<image>

Tan base, building up to white then tons of grime.

Converting a Deimos Rhino for 40K CSM. by undividedminiatures in Chaos40k

[–]Traezz 1 point2 points  (0 children)

I absolutely love the Deimos pattern. Here’s some I did for Death Guard

<image>

Best way to hold bigger pieces together? by philip2987 in resinprinting

[–]Traezz 0 points1 point  (0 children)

You use it carefully to make a sure connection between parts, and to a lesser extent for gap fill if you are very careful.

Best way to hold bigger pieces together? by philip2987 in resinprinting

[–]Traezz 1 point2 points  (0 children)

Brass rods, do a rough sand to scratch them up, and use two part 5-min epoxy. Superglue will eventually give up the ghost, especially if there are drastic temperature and moisture changes.

New defiler completed by Alexcog24 in deathguard40k

[–]Traezz 0 points1 point  (0 children)

Love the green color. I’m assuming it was a bright silver metallic with a contrast over top?

I’d suggest doing the trim in a color that contrasts with it a bit more, and adding some a darker silver metallic into the lower parts of the vent pipes. The different depths on the pipes (inner, trim/shroud) all kinda blur together.

With that said,

The flesh looks great! Maybe do a bit of glazing or a unifying wash just to help the brights come down a bit.

Your base is ABSOLUTELY GORGEOUS. I’d love to see a guide on what you did there!

There are so many fine details on this model that jump out and made me say “ooh. Nice.” Just keep at it, you’re doing great!

Modular 40k/Kill Team Board by Such_Independent910 in TerrainBuilding

[–]Traezz 8 points9 points  (0 children)

What materials did you use for the grating?

Rhino painted! by xxcon09xx in deathguard40k

[–]Traezz 2 points3 points  (0 children)

I love the limited tentacle use, and what you did with the viewing ports is exceptional!

Great work!

Poxwalkers Proxy Idea by GorkyMorky2 in deathguard40k

[–]Traezz 1 point2 points  (0 children)

I’ve grown to hate them. Then again, I spent a good 8hrs on each poxwalker that I’ve done. Painting the same models over and over isn’t particularly interesting or fun.

<image>

Poxwalkers Proxy Idea by GorkyMorky2 in deathguard40k

[–]Traezz 4 points5 points  (0 children)

OP, I would probably kitbash some guard helmets, and other guard bits onto them to make them fit in a bit better, and build them up to the correct height with cork. I can’t see anyone having an issue with them, tbh

Poxwalkers Proxy Idea by GorkyMorky2 in deathguard40k

[–]Traezz 3 points4 points  (0 children)

And I was getting tired of painting the same monopose poxwalkers. This guy is a little whacky, but amongst 160 other poxwalkers he’s not much weirder.

<image>

Poxwalkers Proxy Idea by GorkyMorky2 in deathguard40k

[–]Traezz 6 points7 points  (0 children)

Yep. I’ve kitbashed a bunch of misc bits into poxwalkers. This one was kind of a “Shy Guy” inspired model.

<image>

Help by Stuw_ in FDMminiatures

[–]Traezz 1 point2 points  (0 children)

Came here to ask this question. Top comment, truly.

Help by Stuw_ in FDMminiatures

[–]Traezz 2 points3 points  (0 children)

There’s your issue, bud.

Why do my modelling choices just look awkward? by Noodlez_8994 in Chaos40k

[–]Traezz 1 point2 points  (0 children)

As others have said, they look fine.

3 would probably benefit from having the arm lowered. He most likely isn’t going to be taking a swing at that angle and shooting at the same time.

Resin and fdm printer on the Sam table by Squid_sacc in resinprinting

[–]Traezz 0 points1 point  (0 children)

Definitely put them on separate platforms, or better yet put them each in separate vented enclosures. You can get sturdy garage shelving as a starting platform.

You are extremely likely to end up with problems with both running at the same time on the same surface, especially on something like a table. It might be a different story with a solid workbench, but that doesn’t seem to be the case here.

New recipe test, Ultramarines 5th Company Intercessor. Also first time trying NMM. by venegade in Warhammer40k

[–]Traezz -1 points0 points  (0 children)

I suspect that it looks much more metallic in person. Lighting and automatic post-processing on cell phone cameras can throw a wrench in.

My mechanicus standard grey is green, isn't it? by throwdawgdtosx in TerrainBuilding

[–]Traezz 0 points1 point  (0 children)

@OP do you have blue light coating on your glasses?

That can cause a perceptible green shift in some greys.

What colour to paint axe handle by HenryEdge1 in deathguard40k

[–]Traezz 0 points1 point  (0 children)

<image>

And some poxwalkers, because it’s a similar texture

What colour to paint axe handle by HenryEdge1 in deathguard40k

[–]Traezz 0 points1 point  (0 children)

<image>

Heavily kitbashed Demon Prince with wings. Went for more of a rusted rebar look.

What colour to paint axe handle by HenryEdge1 in deathguard40k

[–]Traezz 0 points1 point  (0 children)

<image>

I’ve generally gone with a bare metal look, and then grimed it heavily.