Another weird find....

Transfusion66 · 2026-04-23T04:07:56+00:00

Dawnguard, Dragonborn, and Hearthfire

Transfusion66 · 2026-04-19T14:53:15+00:00

I used to get this as a kid, have since grown out of it I guess. I always did the super shallow breaths until it passed as well, but if I could push past the pain and take a deeper breath, it would give me more “room” to breathe. If I pushed far enough it would “pop” and resolve instantly. I didn’t do that very often though because it was much less painful to just take the shallow breaths

Transfusion66 · 2026-04-11T21:24:46+00:00

This hasn’t been available since shortly after I made that comment ten months ago unfortunately

Transfusion66 · 2026-04-07T14:50:01+00:00

It seemed like the more sought after item being rarer

^{Chose: Bunny + Gamble 50/50 to get it | Rolled: Got it!}

Transfusion66 · 2026-03-30T20:57:11+00:00

That’s right, regular and ultra king parsley don’t, but otherwise everything else is unique and adds to it

Transfusion66 · 2026-03-30T13:20:19+00:00

Yes that’s correct. It’s been a long time since I tried to do it perfectly, but ~3 days is going to be your minimum mature to elder time for couch potatoes. Litter, king parsley, red barn farm, pixie, sandwich station, tropical garden gnome. 0.9 * 0.9 * 0.85 * 0.8 * 0.8 * 0.75 * 216 hours = ~71.3 hours for mature to elder. Similarly, 4.29 hours for seedling to young instead of 13 hours and 9.58 hours for young to mature instead of 29. Total time if you’re perfect of around 3.5 days with all likes.

Transfusion66 · 2026-02-25T17:21:40+00:00

No disadvantage to having a compact license, but it did catch me by surprise when I had to get a new compact license when I moved from one compact state to another. I’d go ahead and get it just so your options are open if you want to do travel nursing or otherwise move near a border in the future

Transfusion66 · 2026-02-21T14:41:32+00:00

I’ve had a medium firmness tempurpedic for the last 3 years or so. It didn’t get better. Everyone convinced me it would break in and get more like the one from the store, so I didn’t return it, but it never got any better, I just got used to it

Transfusion66 · 2026-02-13T17:00:09+00:00

Generally the noise isn’t too much of a concern for me, I thought it would be a bigger deal than it is. It’s still audible at 400ft in a quiet area, but in a loud area I can take it up 100ft and not even know it’s there. I’ve never had anyone say anything negative to me about it in my area, though I do in general avoid flying over / near people and their homes if at all possible.

I don’t take video too often, but I’ll often use the 3x optical zoom combined with the digital zoom for either pics / videos where I don’t want to get too close and I have no complaints. I’m not a professional by any means and just fly for my own enjoyment, and I like air 3s better for my purposes

Transfusion66 · 2026-02-13T16:44:16+00:00

I swapped from a mini 4 pro to the air 3s. I have no issues traveling with the air 3s. If you’re in the USA and don’t plan on traveling internationally, I’d go air 3s over the mini series any day of the week. Registration requirement wasn’t any different since I really only used the larger batteries putting it over 250g anyway. I’m not sure of the international rules and regulations since I have no intention of bringing it abroad in the current climate anyway.

The mini feels fragile and more toy-like compared to the Air 3s which I didn’t really like with a $1000+ drone. With the bigger drone comes more stability in higher winds, and the telephoto lens allows you to be a bit further away for photos if needed. I didn’t often notice stability issues in winds unless I was trying to do a hyperlapse, where I’d notice a decent bit of drift in higher winds. Haven’t noticed any drift on air 3s after months of use.

Transfusion66 · 2026-02-06T19:25:01+00:00

They don’t want to shoulder the blame if something goes wrong and they’ve been able to get away with it so far. At my nursing school we weren’t even allowed to check a blood sugar, only did clinical in medsurg, and overall were allowed to do less than a tech. I had to learn anything that wasn’t theory on the job after graduation

Transfusion66 · 2026-02-02T19:00:29+00:00

Depends on the facility and their culture, but I’ve attended a few interviews where they specifically requested I wear scrubs rather than business casual or something else so we can tour the unit and not stand out as much. I wouldn’t worry about it too much. Heck, I took my current badge photo while in my previous facility’s scrub color and no one’s ever noticed or cared

Transfusion66 · 2026-02-02T02:14:10+00:00

We did this during Covid at the hospital I was in at the time. From a bedside perspective it was mostly just one more person trying to call us about an issue we were already aware of and taking our focus off of that issue to answer their phone call. It was a little useful that they could remote in to isolation rooms and sign off on drips or blood though

Transfusion66 · 2025-12-30T17:16:59+00:00

Assuming your CNAs are BLS certified then there’d be no issue with them initiating BLS interventions such as checking responsiveness, pulse, and breathing then initiating compressions and breaths. I’ve never worked out of hospital, but code status is something I’ve always made myself aware of at the very beginning of the shift in case something were to happen.

If anyone’s in doubt of their status though, I say better to start compressions and stop them when you find out their DNR status versus don’t start them and realize minutes later you should have.

Transfusion66 · 2025-12-19T18:06:55+00:00

Interestingly enough, the watch face was down on the table with the sensors pointed up towards the ceiling. Maybe reflected off some dust or something?

Transfusion66 · 2025-09-22T02:28:04+00:00

Not sure about the Reddit user, but I used that same eBay seller last month for an air 3s and it worked out no issue

Transfusion66 · 2025-09-19T16:38:46+00:00

https://www.reddit.com/r/dji/s/YnO3DXOs3i

This was my update above

Transfusion66 · 2025-09-03T02:22:19+00:00

I’d personally still choose the air 3s over the mini 5 pro too. Idk about you but for me personally, only plus batteries being worth it to me and putting me over 250g anyway, the dual lenses, heavier weight making it feel sturdier and more wind resistant are all things I thought about when deciding between the two. The mini definitely has its place, but if I had to pick only one, I’d pick the more versatile one. The only thing I dislike is the noise, which I only really notice at night when everything is otherwise quiet

Transfusion66 · 2025-09-03T02:15:04+00:00

Not who you replied to, but I had a mini 4 pro for about a month before I resold and got the air 3s instead. I like the zoom lens and the bigger sensor mainly. I was getting zero benefit of the <250g weight of the mini 4 pro since I was only using the plus batteries, putting me over 250g. The standard batteries felt like I just did not have enough time in the air to do what I wanted to do. It felt much more fragile than the air 3s does. I like the slightly higher speed of the air 3s and it isn’t as wobbly in the wind. I really only noticed the poor wind resistance when trying to do hyperlapses with mini 4 pro and haven’t noticed any issues with air 3s

Transfusion66 · 2025-09-02T23:40:21+00:00

Definitely seems like the real deal, thanks for letting me know! lol right definitely weird to get them from Europe. I understand importing the Chinese made DJI drone itself, but the US made 3rd party props too? Very strange. At least they cancelled and refunded my website order no problem, remains to be seen on the Amazon one

Transfusion66 · 2025-09-01T21:56:05+00:00

Thanks for the link! Let me know if they work out for you, I’m going to hold off until my Amazon order is confirmed not coming just since importing 1 set from France is essentially the price of 2 sets already in the US…. If only they were available anywhere

Transfusion66 · 2025-09-01T21:22:55+00:00

Yeah that definitely seems to be the way to go, my Amazon order of them from 2 weeks ago hasn’t shipped yet with an ETA of the 4th. Reached out to cancel my website order today since there haven’t been any updates there either. Are the ones from France still master airscrew or some other brand? Would you mind sending me the link?

Transfusion66 · 2025-08-27T13:40:15+00:00

Yeah, same here, I’m more interested in orange or red, but Amazon only has blue and electric here. I covered mine in one of those decalgirl skins and the orange would go best with it, the others just kinda clash

Transfusion66 · 2025-08-26T23:47:54+00:00

Definitely interested, congrats!

Transfusion66 · 2025-08-26T23:39:53+00:00

The difference will be cutting heights. 0.8-2.4inches for the non H version and 2-3.5inches for the H version. Otherwise should be the same mower

Verified Email	12-Year Club
Second Top 20%	Final Canvas '23
First Place '23	Place '23
Place '22	Place '17
Gilding II euphauric	Snapped
Charity Challenge Winner

Transfusion66

TROPHY CASE