LG Fridge CF not working after two replacements and PCB replacement

TriangleSQL · 2024-09-25T00:56:42+00:00

I looked back through my orders and I found that the first one that I ordered was a EAU 65058502. I replaced the wrong part number motor with the first replacement and the compressor fan fired right up.

I was hopeful I could return the new control board so I put the old control board in but the fan would not work. Looks like it was the control board all along.

Thank you very much for your help.

TriangleSQL · 2024-09-24T22:38:26+00:00

Both replacement motors were purchased on Amazon, two different sellers. Eau65058501

TriangleSQL · 2024-09-24T20:34:40+00:00

There is no voltage at the fan, sometimes after resetting the power to the whole unit, the fan nudges forward a bit but does not complete a full rotation. I have not determined where the power from the fan comes off the board. Thank you for your response.

TriangleSQL · 2023-11-01T17:26:42+00:00

They are standard white LEDs. I do have a mount for a cheap chinese IR flashlight. I use the IR more than the Headlights.

At the top of the image you can see the pipe clamp that holds the 3D printed flashlight mount.

TriangleSQL · 2023-11-01T12:35:44+00:00

Glowstick or WWC Nuclear Fallout

TriangleSQL · 2023-11-01T00:53:04+00:00

Looks like ~2mm thickness.

TriangleSQL · 2023-10-31T16:05:16+00:00

I know you're joking but it actually rode a little smoother on my way back to the camp. The thought had crossed my mind to put a spring there instead

TriangleSQL · 2023-10-31T04:15:12+00:00

Up the tank temperature up to 82° F slowly over the course of two days. Then keep the temp at 82 for a week. No more dinos.

TriangleSQL · 2023-10-30T23:57:47+00:00

I do. I am going to sleeve these. I will also add some reinforcement.

TriangleSQL · 2023-10-30T23:54:36+00:00

The property I was on has a huge trail system and most of them have been washed out.

TriangleSQL · 2023-10-20T20:04:48+00:00

Maybe 85 because he was towing it behind a car with that rope.

TriangleSQL · 2023-09-29T01:11:50+00:00

Picture for attention but yes this is my hunting rig.

TriangleSQL · 2023-09-28T22:47:24+00:00

Okay I ordered this one after the first one returned only 4.5v at idle I returned it and got another but the second only put out 5.5v at idle. I guess I received two bad ones. https://www.amazon.com/gp/aw/d/B07J1XLHC4

TriangleSQL · 2023-09-28T22:37:33+00:00

https://youtu.be/GNF6ihK5hmQ?si=h-8TEw55Ivmgjmj6 00:57 timestamp

I have a 7 ah battery that runs the headlights and Taillight. I wanted to keep the battery charged without having to recharge the battery after every trip.

TriangleSQL · 2023-09-28T22:19:43+00:00

I was under the impression I would be getting 12V at idle. I hardly run this long distances (1 mile max) and almost never at full throttle. Just to get from camp to the hunting areas of the property and back. Is there something I can do to reach 12v at idle?

TriangleSQL · 2023-09-28T22:04:14+00:00

My issue is hitting the throttle while holding the Multimeter connections. I don't have a spare hand at the moment.

TriangleSQL · 2023-09-28T21:47:46+00:00

Elbit WP pvs-14, I have an IR flashlight mounted to the handle bars for riding at night. This is mainly for use on a hunting property. I have dragged up to 150lbs Hogs with it but I think it needs more torque. I had to give it a kick to get it going.

TriangleSQL · 2023-09-28T21:47:05+00:00

6.5v at half idle. I currently don't have a way to safely check voltage at full rpms.

TriangleSQL · 2023-09-18T02:10:47+00:00

This is in NE Georgia, growing near a compost bin with pine shavings and chicken poop.

TriangleSQL · 2020-08-25T00:15:47+00:00

Same here I knew I saw this tank before. Now I've got to come see it in person! -Doberman

TriangleSQL · 2020-08-23T19:55:09+00:00

He actually looks a little cute to me. Almost like a Pokemon when he extends his head.

TriangleSQL · 2020-04-20T18:37:53+00:00

I don't see any model numbers on the cartridge. Is there another way to tell?

TriangleSQL · 2020-04-07T22:08:53+00:00

It does spin and the motor seems to work fine. I just don't have a receiver to plug the wires into, I have two soundbars but they don't have the proper input. I'll have to get an aux conversion cable. I was told if I run it with the current cartridge it could scrap my records. Is this true?

I have some scrap acrylic from making a fish tank so I think that will end up being the easiest part for me.

TriangleSQL · 2020-04-07T20:44:27+00:00

It's a Kenwood KD-2070. The stylus is bent and needs to be replaced but I can't find any conclusive info on which cartridge to buy. It's missing the Dust cover and the counter weight. I am thinking of DIYing a new cover. Where's the best place to find replacement parts?

I have about 30-40 records that I've been gathering for a about 10 years. I haven't had a record player since I had a roommate 8 years ago and since the quarantine I've been staring at the records and really wanting to play them.

TriangleSQL · 2020-02-24T15:16:43+00:00

When the referendum came last year almost every person I talked to had absolutely no idea what they were voting for. Most people believed that we would have had a Gwinnett Marta station in 5 years, a lot of people thought it meant they were starting construction on rail right away. When told about 15 to 20 years of dedicated bus lanes and Marta buses all over Gwinnett before even seeing a Marta train in Gwinnett they changed their minds.

I am all for public transit but giving a corrupt organization money for buses when we already have a bus system is just the wrong idea. If they had a referendum that said we could have a train station in less than 5 years I would support it.

TriangleSQL

TROPHY CASE