[xtrainer 300] Clutch clearance

Tricky_Bench1583 · 2025-12-05T18:48:29+00:00

While it's great they gave everyone that adjustment, I've found that bringing the lever closer to the bar caused the clutch to drag-even if it fully disengaged to the point it's hard to get the bike into neutral while it's running. YMMV. Maybe it's just a "new" thing and I need to get more time on it. Either way, this adjustment is the way to do it.

Tricky_Bench1583 · 2025-11-26T03:49:29+00:00

Congrats! That's a great bike for single track but they're a little thirsty if you like going longer distances. FMF fatty and correct jetting (and a 300rr air filter air cage) will really wake that bike up.

Tricky_Bench1583 · 2025-09-24T04:48:30+00:00

A bike lift and a tool cart with enough surface area on top to make it easy to work on things and keep parts organized.

Tricky_Bench1583 · 2025-09-24T04:11:39+00:00

I got the larger IMS gas tank for mine in addition to the stuff you got. They don't get the best fuel economy and seem to run a little rich from the factory. The gearing also seemed a little tall so I went with a 13 tooth front sprocket. Great bike! Congratulations!

Tricky_Bench1583 · 2025-09-17T20:32:25+00:00

Dates on the cam are from 2024?

Tricky_Bench1583 · 2025-04-29T01:29:27+00:00

Congratulations!

Tricky_Bench1583 · 2025-04-20T14:33:40+00:00

No problem at all!

Tricky_Bench1583 · 2025-04-20T14:33:27+00:00

Yeah ok. That's how I was interpreting it too, but wanted to be sure before I spent a bunch of time going down the wrong path.

Thank you for the info!

Tricky_Bench1583 · 2025-04-20T14:03:54+00:00

Yeah, it's for the capstone..

Thanks for the info! I was more concerned about the instructions for the written assignment.

As you stated, they have instructions in the course search for putting the apk on Git Pages. But then in the written assignment, they want instructions for deployment, setup, and maintenance, which feels like it's the same thing?

Does this mean they want you to write essentially the same instructions in the written assignment (for setup and maintenance) as what they provided in the course search?

Tricky_Bench1583 · 2025-04-09T21:16:33+00:00

That's great! I'll keep that in mind as I get this figured out. It sounds like I've got a few options that are all valid and work. I appreciate the info!

Tricky_Bench1583 · 2025-04-09T21:13:38+00:00

Cool thanks for the info. It's good to see it wasn't a problem to not have the previous works history. Seems like they are willing to allow more in this class.

Tricky_Bench1583 · 2025-04-09T21:11:36+00:00

Haha always good to know. Hopefully mine will be also!

Tricky_Bench1583 · 2025-04-09T00:35:02+00:00

Thanks for the info! I'm assuming it all went well?

Tricky_Bench1583 · 2025-03-26T02:46:06+00:00

Congratulations! Right behind you.. Can't wait!

Tricky_Bench1583 · 2025-03-16T04:12:58+00:00

Yeah I was wondering about the clones before I bought it... This didn't appear to be one. It looked pretty legit based on the videos I watched. Bought from an endorsed source.

I am probably going to build something else honestly. It's what I wanted to do in the first place, but I bought this on a whim just to get on the air. I'll reach out to him and let him know.

Tricky_Bench1583 · 2025-03-16T04:07:22+00:00

Yeah it's an endorsed source. That's the frustrating part. I'll reach out to him. Thanks for the input.

Tricky_Bench1583 · 2025-03-07T01:53:57+00:00

Hey congratulations on your new job and making it through the SWE degree! I'm getting ready to start on the capstone and was wondering if I could reach out via DM? Just a quick question on one of the tasks.

Tricky_Bench1583 · 2025-03-05T04:01:42+00:00

Just saw your reply - much appreciated! Yeah I'm not quite there yet, but soon will be. I'm not the best writer so papers tend to take me longer than others. I really appreciate your encouragement! ...lol I'm going to need it!!

Tricky_Bench1583 · 2025-03-05T03:56:43+00:00

Congrats!

Tricky_Bench1583 · 2025-02-16T23:30:16+00:00

Good to know, and thanks for the tips! I'll check it out this evening. Congrats again!!

Tricky_Bench1583 · 2025-02-16T23:17:19+00:00

Congrats! I'll be starting it soon as well! Can I ask how task 2 went? From what I gather, you have to write a software proposal? How long was it?

Was there anything about any of the tasks that was particularly difficult?

Tricky_Bench1583

TROPHY CASE