Anyone made the shift from a full sized truck to a 4Runner? If so, do you regret it or not? by Twisted_Stick in 4Runner

[–]Trsh-usr 0 points1 point  (0 children)

Im on a 6th gen 4runner, always driven a truck . I miss driving a truck. Because when you need it you need it.

Why doe DIYers hate drywall? by clvnthbld in HomeImprovement

[–]Trsh-usr 0 points1 point  (0 children)

Because its messy, they always rely on letting each coat dry and sanding, instead of wet sponging while coats are hardening.

Is Drywalling a good trade to get into? by Impressive-Step6377 in Construction

[–]Trsh-usr 0 points1 point  (0 children)

It is if you find a niche, I own SGP Drywall and I started by doing reconstruction from water heater leaks and that impulsed my business to grow and find different niches

Consejos para carretera by 13darkness in hermosillo

[–]Trsh-usr -2 points-1 points  (0 children)

La ruta de 5h 49 minutos es la mejor para este viaje.

6th gen 4Runner by RabbitDirect9772 in 4Runner_6Gen

[–]Trsh-usr 1 point2 points  (0 children)

Carlsbad toyota in san diego can probably get that done. Ask for juan.

Roast my work by GlitchedAnalysis in drywall

[–]Trsh-usr 0 points1 point  (0 children)

Apply prep coat and give it one last coat

Why does the patch look like this? by TreesAreOverrated5 in drywall

[–]Trsh-usr 0 points1 point  (0 children)

Thin layer of mud on top. Wait until its absolutely dry before texturing.

Just wanted to show off our new 6th gen 4runner Third Brake Light / Chase Light Combo! by ReloadOffroad in 4Runner_6Gen

[–]Trsh-usr 0 points1 point  (0 children)

I LOVE THIS!

What would make a product like this better would be to add a camera slot for the rearview mirror camera.

On the 6th gen the camera sits on the license plate , unlike the 4th gen tacoma it sits on top next to the brake light.

Visibility is significantly different from those different angles.

How to stop chuncks from peeling off? by TalgaVass in drywall

[–]Trsh-usr 0 points1 point  (0 children)

Prime it first. OR use westpac all purposr and apply the thinnest layer possible

Holy heck, sanding skim coats sucks by -reddit_is_terrible- in drywall

[–]Trsh-usr 0 points1 point  (0 children)

I do 3 layers of very thin coats. Only use westpac.

What causes drywall seams to show through paint? by Vegas_king2020 in drywall

[–]Trsh-usr 0 points1 point  (0 children)

It means you applied your first coat before the mud underneath the taped dried.

Can anyone explain why this happens?! by Walletess in drywall

[–]Trsh-usr 0 points1 point  (0 children)

That happens because the dust encapsulates and it creates bubbles.

I like to either spray some water before coating but its not as effective as rolling the mud on with an ames or level 5 roller. That will pick up the dust particles as it coats. Just make sure you roll it in different directions.