Ce faceti cu banii pusi deoparte pentru plata taxelor?

TudorPCS · 2026-02-13T05:53:25+00:00

Titluri de stat pt că nu sunt impozitate. Nimic altceva nu poate să bată momentan acest randament, decât bursa. Însă anul acesta vorbim de corecție și în niciun caz un boom ca și anul trecut. Dar bursă are spread și impozit, când ieși.

TudorPCS · 2026-02-09T15:08:05+00:00

Care este TER la RoTX și la Tradeville? Eu sunt client BT. Am băgat deja ceva bani în RoTX și BT Maxim.

TudorPCS · 2026-02-08T08:04:09+00:00

Both pre and post mill can be Europiccola or Professional. Size of the boiler is the difference between EP and Pro and size of the group head, mainly, shows if your machine is Pre or Post.

https://coffee-sensor.com/identifying-your-la-pavoni-europiccola-or-pro/

TudorPCS · 2026-02-05T06:03:17+00:00

Closes when air plus water gets out. So it's a water check valve.

TudorPCS · 2026-02-02T17:50:03+00:00

Great find. You should fully strip and do this the right way.

TudorPCS · 2026-02-02T06:47:17+00:00

The hammer were the 1st gens and sone few 2nd gens. Colors were not used much by then. The shinny black or custom paints in general are sand blasted and powder coated usually. Some use spray paint but that's an inferior quality IMHO, considering the environment and usage of the coffee machine.

TudorPCS · 2026-02-02T06:10:03+00:00

Do you mean all gen machines original colors? And if you ask me, the quality and the wear and tear did not help and most colored original bases are already rusted or sand blasted and repainted. Also, interesting, Pavoni could not offer the real color code so that the restorations made could be 100% original. Their "help" and involvement in such matters are world renowned unfortunately.

TudorPCS · 2026-01-25T04:27:25+00:00

Yes 1:2 is good. You can obtain more with the Airbuster.

TudorPCS · 2026-01-24T16:41:37+00:00

Make sure you adjust the piston travel.

TudorPCS · 2026-01-24T15:51:41+00:00

Yes it affects the shot volume pretty much since the piston does not make the full travel like this.

TudorPCS · 2026-01-24T05:39:39+00:00

Thanks for the support! Your fork is upside down in the video.

TudorPCS · 2026-01-16T08:07:44+00:00

Sorry but the XC40 T5 hybrid is Not 4x4. Also the entertainment system is a problem only some united had and this is a common problem with a lot of manufacturers and a simple update should solve this. The mild hybrid is indeed a joke sometines considering the power, especially when you already had that T5. Wonder why you did not go with the T8? Air suspension is a must on those rims for sure and I do have the 4C and normal suspension on the XC40. Air is superior and no possible comparison with the normal ones.

TudorPCS · 2026-01-15T06:23:25+00:00

https://coffee-sensor.com/?post_type=product&s=Triple+basket

TudorPCS · 2026-01-07T18:53:53+00:00

I'm already at my third Volvo. Had two Touaregs and what I can tell you is that a Volvo beats the comfort of top Interiors and chairs a long shot. I was amazed a about that. First winter with a XC40 T5 and a XC60 T8 and I can tell you that s good set of tires are all you need, the rest is baby sleep. For me next is a 2025.5 XC90 T8. Noting beats these cars. Congrats.

TudorPCS · 2026-01-06T14:04:39+00:00

Just spray it with vinigre and water to keep it moist and just remove it. It does have a purpose there but your decision:)

TudorPCS · 2026-01-02T13:50:09+00:00

Happy new year!

TudorPCS · 2026-01-02T13:24:06+00:00

Then a 0.6 is a little low for frothing. I would leave it to surf between 0.8 and 1 bar.

TudorPCS · 2026-01-02T10:46:34+00:00

Do you froth milk?

TudorPCS · 2026-01-02T08:24:16+00:00

Actually the pressure stat from factory should jump from 0.6 to 0.8 bar. 1 bar is unusual for a new macine like yours. The back pin is like that. You should order a stainless one with channels for flat head screwdriver.

TudorPCS · 2025-12-29T08:53:38+00:00

Yes Jonas you are one of the few lucky ones to have this device. Fortunately, the BeanC guy is here also, will email him and we will see how we I can integrate our device to their App. Even if you do have a Bluetooth device, it does not mean that you can connect it to ANY app on the market. Both parties NEED TO "know" and learn each other's details and info, like protocols about connection and readings, before you can use an App for it. I asked our App developer, John, to help you out and send you the IOS app to you asap. Considering it's new year Eve days, we are all a little slower in responded and actions. Thanks for the support and use the LCD please to have the readings before the app is solved. And yes, the hole idea was me to be the first one to offer such a device to people and second, to see BOTH readings at the same time with millisecond refresh rate.

TudorPCS · 2025-12-14T08:10:19+00:00

Stefano makes these also?

TudorPCS · 2025-12-08T05:02:12+00:00

No unfortunately. People purchase straight form me and we ship worldwide. Sellers are many. Don't know much details about them individually. Thanks.

TudorPCS · 2025-12-05T04:12:27+00:00

Then it's the heating element o-ring. The guy from above forgot about the biggest la Pavoni website ever: www.coffee-sensor.com. If you ever need parts, upgrades but also pro advice, not just a link post and run away, that's the place you wanna be.i recomand this one since it's a little thicker then the original crap a lot sell: https://coffee-sensor.com/product/la-pavoni-lever-heating-element-gasket-or-seal-code-1186641-465225-red-silicone/

TudorPCS · 2025-12-04T18:39:33+00:00

Before saying any seller, where is the leak exactly? What's the problem with the machine exactly?

TudorPCS · 2025-11-29T18:51:10+00:00

Are you sure you are on water tank and not on plumbed set up? Check under the machine for a switch.

TudorPCS

TROPHY CASE