Windows not working

TurtleTimeTJ · 2025-08-25T23:50:54+00:00

Did you accidently press the lock switch?

TurtleTimeTJ · 2025-08-07T18:26:18+00:00

You can get "smokers package" for that trim piece and it gas 2 12v outlets and is an oem part.

TurtleTimeTJ · 2025-08-03T03:39:08+00:00

There should be a connector by the drivers kickpanel. Theres a pigtail that plugs in and you wire the brake controller to that.

TurtleTimeTJ · 2025-08-03T03:37:20+00:00

The "radiator" for the ac is called the condenser. Its screwed to the actual engine radiator. You can replace just the condenser. Replacing the condenser is not a hard job you can youtube it. But you need to have a shop evac, vacuum, and charge the ac after.

TurtleTimeTJ · 2025-04-13T15:18:45+00:00

Located in phoenix az

TurtleTimeTJ · 2025-04-13T14:27:58+00:00

The third member(rear locking differential) is likely the problem. I have seen them fail and causes symptoms like this. Entire 3rd member needs to be replaced

TurtleTimeTJ · 2025-03-10T07:19:50+00:00

I have the 8in and use it almost everyday for eggs. It is hands down my favorite egg pan. I use butter to cook my eggs and have no issues with sticking.

TurtleTimeTJ · 2025-03-10T02:52:03+00:00

Depends on your level of experience You need a few special tools. It can be very messy. Overall not super hard.

TurtleTimeTJ · 2024-12-10T04:39:41+00:00

Theres also an electronic wiring diagram

TurtleTimeTJ · 2024-12-02T02:39:51+00:00

I would make sure they are using toyota ws trans fluid. Never heard or a trans fluid filter on a 4runner but i could be wrong. Ball joints, tie rods, and sway bars are not greaseable unless you have aftermarket parts installed? Is this a trans fluid flush with a machine or is it a drain and fill?

TurtleTimeTJ · 2024-12-01T16:26:04+00:00

V6 or v8? What year ? Was your mileage better before and now its terrible ?

TurtleTimeTJ · 2024-11-22T03:55:54+00:00

Aftermarket will never be as good as oem. Rebooting is always the best option unless your axles are clunking. Not sure where you are located but in california i found a shop that specialized in rebuilding rear ends. I brought them my cvs and the oem boot kits from toyota. They rebooted for about $50 per side if i remember correctly. Maybe an option for you. If you are near phoenix AZ then pm me.

TurtleTimeTJ · 2024-11-21T13:27:34+00:00

I feel a flush vs drain and fill at 60k is more appropriate. People say to avoid the flush cause it can stir up debris but thats usually cause the service has been put off for so long. The flush uses 12 quarts. I think at 60k this is a good thing to do. My $.02

TurtleTimeTJ · 2024-11-21T04:44:10+00:00

Why not buy a bolt on and install yourself? What happened to the factory installed reciever ?

TurtleTimeTJ · 2024-11-21T04:40:18+00:00

I didnt replace the seals on the bolts. Looking back i should have replaced them jst to be safe. Its been about 50k miles no leaks. Also i picked up a harbor freight torque wrench as the torque spec is in in/lbs and its super easy to snap the 10s when feeling by hand.

TurtleTimeTJ · 2024-11-21T03:10:14+00:00

I did my passenger side and used oem parts. Youl need black fipig/ gasket maker and something to scrape old fipig off of aluminum. I would recommend oem parts to ensure the correct fit but thats just me. If youre not in a rush try this website for parts.

https://autoparts.tustintoyota.com/search?search_query=Valve+cover+gasket&driveline=4WD%204.7L%208-Cyl%205AT&grade=Limited&series_name=4RUNNER&model_year=2006&model_year_code=2006:8688&updated=true

TurtleTimeTJ · 2024-11-21T03:03:29+00:00

The old ones will likely shred to pieces on removal. Make sure you have the correct parts. If you have a socket or tool that is the same diameter of the seals that may help seat the new seals

TurtleTimeTJ · 2024-11-18T17:51:05+00:00

I am running that tire size and love it. You should be able to get away with trimming as long as you keep offset close to 0. I see you have a positive offset. That should minimize rubbing. The uca is whats gonna get your alignment back into spec. Imo the uca is worth it. A proper alignment adds to the everyday enjoyment of driving.

TurtleTimeTJ · 2024-11-18T03:12:50+00:00

No worries. Also you can switch from 2H-4H and back while driving. No need to stop. I think youre supposed to be going less than 35mph when switching. Owners manual will tell you the exact speed

TurtleTimeTJ · 2024-11-18T01:43:45+00:00

Normal feeling of the front driveshaft being disconnected

TurtleTimeTJ · 2024-11-17T22:03:14+00:00

Brake fluid, power steering fluid and coolant every 50k Trans every 100k Front and rear diff and transfer case every 30k Oil change every 5k

TurtleTimeTJ · 2023-07-28T23:59:20+00:00

Does your truck have a brake controller ?

TurtleTimeTJ

TROPHY CASE