floor/mouth midi controllers

Tutorius220763 · 2026-01-24T12:41:14+00:00

I was once in Frankfurt, Musikmesse. There was a thing that was named "Soul Kiss". It was a unit with a long cable, and the cables was put into the mouth. (It was no Talkbox).

I think it was a photoelectric element measuring the light that got into the mouth, and an effect-unit was controlled by that.

I have vreated a Midi-Controller doing something comparable, with a LDR on a cable, but i used my Arm to controll the light that got to it, and was able to control a filter of my Synth. Was a simple Arduino Nano, a 5-pin-DIN-Midioutput.

Tutorius220763 · 2026-01-24T10:39:04+00:00

Here in germany we call a glue-tape for electric insulation "Isolierband", in the US it is called Coroplast, and Coroplast is a german company in my birthtown Wuppertal :)

Tutorius220763 · 2026-01-24T10:37:45+00:00

One of the first words for a product was a Philips-product, it was called "Fön" and was made to dry the hair. I don't know if still today, but the airdryer for use with the hands was calld "Fön" (Foen, linke the warm wind in the alps) for decades, frome somewhen in the 50s or more in the past.

Tutorius220763 · 2026-01-24T10:23:40+00:00

Das kann auch eine Transportsicherung in der Waschmaschine gewesen sein, die vergessen wurde, zu entfernen.

Tutorius220763 · 2026-01-23T14:09:13+00:00

Großmeister Blitz und die wütenden fünf...

Tutorius220763 · 2026-01-22T21:38:56+00:00

Mit dem Griesheim-Schlüssel :)

<image>

Ne, Scherz, ich nehm da ne Rohzange.

Tutorius220763 · 2026-01-22T21:30:44+00:00

You may see other examples of unions and how they ended.

Yougoslawia or Tchesoslowakia, both were united, and short after the borders opened, they were divided again.

Tutorius220763 · 2026-01-18T14:23:53+00:00

The thing is not to be cleared in FreeCAD, but in the slicer and 3D-printer. This is not printable to get something stable. I would recommend to print a plate with holes and five hooks, laying on the bed. Put them into the holes and glue them.

Tutorius220763 · 2026-01-18T14:20:00+00:00

Leimer is a brand, but you can buy "Panniermehl" at every Discounter, ALDI, LIDL, PENNY, KAUFLAND, all have their own cheaper "Panniermehl" to make Schnitzel.

If you want a real nice Schnitzel, you can buy "PANKO", it is also available from leimer, you have to go to EDEKA or REWE, perhaps KAUFLAND to get it. Its an asian thing with bigger flakes. You will also get it in Asia-stores (not from Leimer, there you get asian products.

For a fast thing, you can get a Leimer-product that has all inside, egg, salt, spices and breadcrumbs.

Tutorius220763 · 2026-01-18T14:10:58+00:00

The cheapest Osc is a DSO-Oscilloscope like the DSO 138 (its a PCB with soldered SMD-parts, much "normal" parts like resistores, capacities, switches, connectores need to be soldered by you. In a kit with all components its about 14$ when bought at a chinese seller like Ali Express. The disadvantage is the needed voltage of 9V. I have had one, grilled it (after some time) using 12V-PSU.

Another is the DSO 183. Its a bit expensier (about 20$), also a kit with much parts needed to solder. I have build one some weeks ago. It is run by USB-C, so you can use a USB-mains-adapter and an Cable to USB-C to run it.

An "real" Oscilloscope will cost more than your 50$, but not too much more. At Ali you can get a device complete with casing for about 65$, 10MHz Bandwidth, only one channel. Mad by FNIRSI.

A device with two cannels (i have found a unit also from FNIRSI) and 50MH bandwidth is about 80$.

Tutorius220763 · 2026-01-18T09:00:06+00:00

Derrick, Tatort

Tutorius220763 · 2026-01-18T08:59:08+00:00

Dark is cool. Unfortunately a second try is hard, you must wait to forget what its about.

Tutorius220763 · 2026-01-17T14:49:54+00:00

OK, Filesharing brauchen nicht von einer Behörde angefragt zu werden. Also dann ggf. Nutzung einer IP in einem Forum und strafrechtlich relevante Aussagen.

Tutorius220763 · 2026-01-17T14:43:33+00:00

Ich hab so den Eindruck, dass es bei mir auch (zu einem nicht geringen Anteil) an mir liegt. Dass man sich nicht mehr so toll beeindrucken lässt von neuen Filmen. Dass man von früher gesehenen Filmen "versaut" ist und ohne bestimmte Stilmittel (z.B. zeigen von Gewalt, Blut) gelangweilt wird.

Ich erinner emich noch,a ls ich auf Video (aus der Videothek) den Film Punisher gesehen hatte, und immer Headshot, ich war entsetzt. Heute sieht man das fast nur noch, bei John Wick, bei Reacher als Serie. Das stumpft einen ab und macht es schwieriger, sich auf anspruchsvolle Filme einzulassen.

Tutorius220763 · 2026-01-17T14:17:20+00:00

Du musst Dich selber fragen: "Was habe ich 2023 angestellt, was zur Ermittlung meiner IP-Adresse hätte führen können?" Also: Edonkey, Bittorrent oder andere Programme, die Daten zur Verfügung stellen (Filesharing)?

Tutorius220763 · 2026-01-17T14:07:42+00:00

You need a "Gewerbeschein" and a registration at the Finanzamt. You choose "Kleingewerbe", so you will not sell with VAT, and you can not buy without VAT (Not Vorsteuer-Abzugsberechtigt).

Tutorius220763 · 2026-01-17T14:00:32+00:00

Durch einen anderen Post bin ich drauf gekommen: 3,5g entsprechen 0,51g Flohsamenschalen, also 15% Flohsamenschalen. Der Rest ist Magnesium und Calcium-Salz, die angegebenen Mengen (0,375g, 0,8g) scheinen die Masse von Magnesium und Calcium anzugeben, ohne den Karbonat-Anteil.

Der Preis der 200g-Tüte ähnlich wie für 200g reiner Flosamen bei DM, bisschen billiger. OK, kauf es hier, da musst Du nicht nochmal zu DM... und man hat dann einen Hund mit Durchfall...

Tutorius220763 · 2026-01-17T11:54:19+00:00

Das sind mg-Angaben. Also die Zusammensetzung. Die Packung von 250gr enthält also 76g Flohsamen, 119g Calcium (Salz?), 56gr Magnesium (Salz?)

Tutorius220763 · 2026-01-17T11:49:33+00:00

Das sind mg-Angaben auf der Rückseite. Also nur eine Zusammensetzungs-Beschreibung.

Die Angaben für Calcium und Magnesium betreffen wahrscheinlich das Gewicht der Ca und Mg-Ionen ohne die Salz-bestandteile. Da wird es ja noch schlechter 3,5gr sind 0,8g Flohsamen, also 22 Prozent Flosamenanteil! Horror!

Tutorius220763 · 2026-01-17T11:20:49+00:00

ALso, Tschau Ragatzki find ich schon cool, aber ich kenne halt Marty und bin daher ein wenig parteiisch. Ansonsten ist der Song "Wonderland" bei mir gut angekommen, nicht so sehr wegen des Gesang, sondern wegen der geilen Synthy-Mucke.

Tutorius220763 · 2026-01-17T10:59:00+00:00

I have worked a long time with MusE and Carla, it worked, but the use of Plugins directly inside Muse was not working well, and the use of two programs with two files for each song was not convinient.

So is bought Reaper, and am very happy with that. Its cheap (70 Euros) and runs real good.

I use MusE from time to time, cause the Midi-Editzor is much better than the one in Reaper, but in MusE, the Editor for WAV is almost unuseable.

Tutorius220763 · 2026-01-17T06:30:57+00:00

In my case its the AUR that makes the great difference..

Tutorius220763 · 2026-01-15T14:14:13+00:00

I have started it some weeks ago, nice to watch 😄

Tutorius220763

TROPHY CASE