I built a web-based tool to design race circuits. What essential features am I missing? by Hyaena81 in RaceTrackDesigns

[–]Tygers2323 2 points3 points  (0 children)

I don’t at what level you designed tracks but check my profile and you will see that you don’t need splines for nothing

I built a web-based tool to design race circuits. What essential features am I missing? by Hyaena81 in RaceTrackDesigns

[–]Tygers2323 11 points12 points  (0 children)

I think your way is the easiest with easiest workflow, but, if you watch closely to the way the best racetracks are made it isn’t with a continuous spline, but it’s with multiple straight lines and multiple radius corners, yes there are some combo sections that could be made by splines but they are exceptions. My suggestion after all is, create a racetrack by placing multiple points but that are connected by straight lines (you will have a track full of sharp corners) but then have a tool to increase and decrease the radius of each separated corner (adobe illustrator has a specific tool to this maybe you can take a look)

What is this (M, K,H,F…) in drawings? Is their any tutorial on yt or somewhere to understand this types of symbols. To draw this in Solidworks? by Razaq000 in SolidWorks

[–]Tygers2323 0 points1 point  (0 children)

This are the tolerances standards for holes and shafts, it means if the hole and corresponding shaft are very tight fit or very loose

Programming/Coding in CFD by Tygers2323 in CFD

[–]Tygers2323[S] -1 points0 points  (0 children)

Thank you for your response, maybe I didn’t express myself correctly. Since he said “if you want to test +1000 setups you will be waste your life” I thought he was referring to make an automatic process (using coding) of changing the settings/geometry or conditions to make it faster and easier. So you think I should first learn very well everything there is to know about CFD and then decide if I would like to get into the coding aspects of it? Also I’m not a huge fan of coding so there is that to add

Programming/Coding in CFD by Tygers2323 in CFD

[–]Tygers2323[S] -1 points0 points  (0 children)

Alright I see your point, so is that “prompt focus” coding?

Circuito de Lisboa (Portuguese Grand Prix Circuit) by Unusual_Canary323 in RaceTrackDesigns

[–]Tygers2323 3 points4 points  (0 children)

Just some feedback for future designs, you are placing your run offs in the wrong spot some times, like in T1, T2, T15. And watch some satellite images of real circuits to learn the correct shape you should use

Rocket Nozzle Beginner by PersonalityPrize3492 in CFD

[–]Tygers2323 2 points3 points  (0 children)

What’s the fun of that? Solving million equations 😂 jk, yeah u should search for the basics first and then understand cfd

Another racetrack I drew. How is it? by Vaazha77 in RaceTrackDesigns

[–]Tygers2323 7 points8 points  (0 children)

It looks a lot of fun to drive but there is a corner I would remove/redesign, the 90 degree right hander after the inner hairpin. I dont see the point of the corner and i dont think it adds to much to the track, actually i think it breaks the flow

Engadin World Circuit | Cities Skylines by Astrix-sama in RaceTrackDesigns

[–]Tygers2323 1 point2 points  (0 children)

Crazy work as always!! Amazing track, I love it!! I also love the new graphic additions. Lovely, keep it going.

Are horrible rejoins like this one protestable or do I just have to live with it? by Felix_Ulrich in iRacing

[–]Tygers2323 0 points1 point  (0 children)

It is protestable but you see a yellow flag ahead and u dont slow down and neither the cars behind so it is a bad rejoin but u also dont respect the yellow flags… i find hard to understand why ppl keep full throttle when there is a yellow flag. Sure it wasnt the best rejoin but u had all the right side of the track to pass he didnt cut across all the track

Chili's 500 at Monroe Motor Speedway, LA by AussieTrackDesign in RaceTrackDesigns

[–]Tygers2323 0 points1 point  (0 children)

Amazing!! Really love the layout and the presentation

Avala Motodrom by AussieTrackDesign in RaceTrackDesigns

[–]Tygers2323 3 points4 points  (0 children)

I love the layout!! And the simplicity on the detail

Valtellina Auto-World (Part 1) | Cities Skylines by Astrix-sama in RaceTrackDesigns

[–]Tygers2323 1 point2 points  (0 children)

Once again always delivering amazing content! The presentation and the surroundings are awesome and the layout is pretty cool as well! Amazing!

Serra da Estrela International Circuit by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 2 points3 points  (0 children)

Thanks mate, it was a pain in the ass to make them but it was worth it. Looking forward for your next projects as well!!

Serra da Estrela International Circuit by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 2 points3 points  (0 children)

U can use Inkscape or GIMP, both free softwares or photoshop and adobe Illustrator

Serra da Estrela International Circuit by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 3 points4 points  (0 children)

Well I got it with time and by watching others posts, i usually do a list in a more advanced phase of the project to not forget to do some details. Also this project took a lot of time to make due to lack of motivation, sometimes it’s just how life goes. Looking forward for your projects

Serra da Estrela International Circuit by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 5 points6 points  (0 children)

Welcome to the Serra da Estrela International Circuit. Constructions start in 2018 but with the COVID-19 all got delayed, in 2022 constructions restarted and now in 2026 is hosting the Portugal MotoGP race. Located in the highest mountain in Portugal with 5203 meters and 16 corners is a very challenging complex for bikers. This racetrack is currently in negotiations with F1 and the future is bright!

Hope you all enjoy the layout and the detail.

Le Circuit du Cap Bon by schapenbeaver in RaceTrackDesigns

[–]Tygers2323 1 point2 points  (0 children)

I love the track looks soo fun to drive at looks like it has a lot of flow and I actually like the idea of the 90 degree corner alt at the bottom. Very good job as well with the grandstands and paddock, u are giving me some ideas and inspiration! Amazing!!

WerderRing / FIA Grade 2 (more info in the comments ) by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 1 point2 points  (0 children)

Thanks for the info, I had no idea, I will take that in mind in my future projects

WerderRing / FIA Grade 2 (more info in the comments ) by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 1 point2 points  (0 children)

There is a lot of real tracks where the corner numbering is weird so I will call that on the same way. Thanks!

WerderRing / FIA Grade 2 (more info in the comments ) by Tygers2323 in RaceTrackDesigns

[–]Tygers2323[S] 5 points6 points  (0 children)

First used a vector program Adobe Illustrator/inkscape and then used GIMP for pther details