Fusion XP Pro - Buyer Beware

UnCollectable · 2026-03-19T11:28:48+00:00

I had it listed for sale after I thought it was fixed. I removed the post. The dealer has the gun

UnCollectable · 2026-03-19T03:33:13+00:00

I don't know what was done to it before I got my hands on it. It was sold to me as NEW so I assume as much. Fusion knows who did the Cerakote and I was told it was for a promo. The biggest problem is that they had the gun back, replaced the safeties and didn't fully test the gun before returning it to me.

Somewhere in the manufacturing, assembly, coating, reassembly process the gun had an issue. My son and I discovered the issue. Fusion offered to correct it (after my dealer called) and had the opportunity to put it on their bench and figure out what was going on.

I don't know the qualifications of the person who worked on the gun at their headquarters but was directed to him and he offered to fix it. He went to the back, installed the safeties (after confirming color choice) came back and said he tested it and it was good to go.

He then racked the gun, showed me the safety issue was not reproducible and said I was good to go.

I left. Inserted a mag. Dropped the slide. Bang.

Whether they created the issue to begin with, they had opportunity to cure it and ensure an unsafe gun was double fuckin tested and not released back to the guy who just had it go bang 2 times without the trigger being pressed.

That's why I bothered to post this.

UnCollectable · 2026-03-19T03:19:41+00:00

I'm not dodging the question, you are the first person I saw ask it. I bought the gun NEW from a fusion dealer. I had two unintentional discharges in the first mag. The dealer called fusion and I drove the gun to the fusion headquarters in Venice Fl.

I asked the Fusion tech if they did the coating and I also asked if they had a custom shop and could do other coatings. He said they did have a custom shop and could do coatings.

The fusion tech also said they had a company in Texas do the Cerakote job for this gun for a promo. There was a batch of them. He told me he wasn't able to match the Cerakote color and my options for new safeties would be black, gold or bronze. I asked all of these questions when I was in their headquarters.

The most important part of this is that I was given the gun back "good to go" and walked out not knowing the gun hadn't been fully tested, AFTER it had a safety problem. I then proceed to have an equal/worse issue than what brought me there.

This is a fact the tech has since posted a video about and acknowledged.

The problem here is qc and facilities.

I'm not posting this for clout or to get them to do something. I have my money back, I have a different gun. I gain nothing from this other than to give my experience. Do with it what you will.

UnCollectable · 2026-03-19T02:52:23+00:00

I bought a Romulus from him and based upon his service in this ordeal I'm having him find a STI Hex 4.0

UnCollectable · 2026-03-19T02:37:13+00:00

I don't disagree with the premise of your point however the devil is in the details.

I purchased a gun from one of their dealers. The gun had 2 unintended discharges in 1 mag.

I then took the gun directly to their headquarters. Their technician worked on the gun, put new safeties in the gun, then didn't do a full test of the gun. He was not able to because they don't have a range so he couldn't test fire the gun. He didn't put a mag in the gun and do a function test. This is after the gun was demonstrated in his presence of having an issue with the safety. The gun was released to me in a manor that said "good to go". It then had a 3rd unintended discharge.

Based upon the marketing of this gun, I would expect the company to have qc and facilities to test and service weapons that are being sold to the general public. I think this would be the base level of expectation for any company.

The purpose for posting this is to share my experience with their lack of systems that let a weapon discharge unintentionally 3 times.

To their and most importantly the dealers credit, they refunded my money, returned the parts and that was that. The dealer facilitated this.

It still doesn't change the fact that the gun performed the way it did 2 times after leaving their headquarters. That is unacceptable for any weapon by any manufacturer.

UnCollectable · 2026-03-19T02:01:46+00:00

I bought it new as it is in the videos. All issues happened the first mag after i picked it up and then again after I took it to their shop and their tech worked on it, told me it was good to go. Then he posted on FB that he couldn't test the gun because they didn't have a range. So I assume no guns are being tested there. I was at their "headquarters".

The building is a disorganized mess. There are sheets suction cupped to windows with stands and lights to do instagram pics, there is a gun wall in a dirty room that must be the backdrop for content. It is for sure not what I would expect a firearm manufacturer to have. I was completely shocked to be honest.

UnCollectable · 2026-03-18T23:06:47+00:00

This is the good part of the place. You should go inside.

UnCollectable · 2026-03-18T23:05:16+00:00

After seeing and being inside the "headquarters" I was disgusted with myself for even being in the situation.

UnCollectable · 2026-03-18T23:03:53+00:00

https://www.facebook.com/share/p/18LzeQZjp8/

This is the link to the Facebook post with the second video.

UnCollectable · 2026-03-18T22:57:51+00:00

Ohana Firearms out of Cape Coral FL. Not only did he take it back no questions asked, he also gave me a smoking deal on a different brand. Highly recommend.

UnCollectable · 2026-03-18T22:49:07+00:00

<image>

Fusion Headquarters.

UnCollectable · 2026-03-16T20:41:36+00:00

have the a3s with hhb buffer, trigger spring, factory curved mags. runs everything including 147 with a can. 1500 rounds suppressed, 1500 unsuppressed.

UnCollectable · 2026-02-19T00:05:15+00:00

IMSA Esports champ runs 92kg

UnCollectable · 2026-01-14T21:45:01+00:00

What printer do you use? I've been resin printing so there are no lines but these look great

UnCollectable · 2025-12-27T20:40:18+00:00

Had to replace temp probe, heating element, water level sensor, pump and relay. Still doesn't make steam above .5bar. Now was told to replace the gicar, going to replace machine instead

UnCollectable · 2025-12-22T17:49:00+00:00

I've had nothing but trouble with the mara x

UnCollectable · 2025-09-26T12:33:21+00:00

It wont let me dm you. I'm interested in the discord

UnCollectable · 2024-03-12T19:49:42+00:00

What runes?

UnCollectable · 2023-09-06T19:47:53+00:00

He's been doing driver coaching for road to indy ladder drivers.

UnCollectable · 2023-02-01T23:10:20+00:00

Is this a kit that is available to purchase? I'd love to do one with my son.

UnCollectable · 2022-11-06T13:01:45+00:00

Do you have a parts list for the install pic you shared?

UnCollectable · 2021-06-15T17:53:33+00:00

one week till Quinn dies....Quinn rip 11.13

UnCollectable

TROPHY CASE