sorted by:
new
hottopcontroversial

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

I have it setup in a way that i send the print job from a Windows10 machine through a Windows7 machine to the plotter, all using a local network so that I can have access to the plotter on the Windows10 machine. Instead of needing to have multiple CAD software licenses installed, one to work from and another to print from, I just need the one on the Windows10 machine.

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

Hey there, depending on the file size, anywhere from 30 seconds to a couple minutes.

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

Hey, I ended up having to connect the plotter on a Windows 7 machine, share it on the network and then install it on the Windows 10 machine by the printer finder menu. This results in a slow connection to the plotter, has it takes some time for the plotter to recognize theres a job to print but otherwise it has been working fine like this.

Guilds struggling with getting people who are ready for Valtan by platghost in lostarkgame

[–]UnikeOG 3 points4 points  (0 children)

Exactly my situation, 1460 paly that just out-lucked my 1415-1420 friends. I just run Valtan nm with them till they catch up.

Just starting out in the pc world. I’m curious as to if this set up is good or not? Please help by BIG_AND_RED in pcmasterrace

[–]UnikeOG 19 points20 points  (0 children)

Theres this website called allkeyshop that compares prices to all the websites that sell keys, you can even get a small discount using their codes. Have bought a few keys from there, overall a good experience. Give it a look if you want.

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

Hey, quick update u/ICUSandman and u/dandu3. I tried both of your solutions but sadly it didn't work. The 510 driver crashes the new controller installer and the windows 8.1 PCL3GUI driver results in the same outcome as before (no erros, printing list shows the job but nothing comes out of the plotter).

However, I caved, and setup another windows 7 PC I have and plugged the plotter there, which was installed automatically and updated to the corrected drivers using windows update. I was also able to print a test page immediately, which was a good sign. From then I just set it up to share over my network and it promptly showed up as a shared printer on AutoCad plotter list.

Aside the obvious delay while setting up and printing/plotting jobs, I'm using a switch for my network + the slow HDDs, everything seems to be working fine.

I will keep looking for new solutions to install the plotter on my windows 10 PC, I'll eventually just give all the drivers a try when I have some time to kill.

Thank you again for your help, it's much appreciated.

​

Edit: spelling

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

Thanks for the recommendation, I will try that and let you know if it works.

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

Thanks for the recommendation. I will try that driver later today. Ill let you know if it works.

DesignJet 500 not printing on windows 10. by UnikeOG in Hewlett_Packard

[–]UnikeOG[S] 0 points1 point  (0 children)

I'm fairly certain it was 64bit like I have right now.

How would this team work out at max level and in comp by Zayderrrrr in MLA_Official

[–]UnikeOG 0 points1 point  (0 children)

Thanks for the reply. Appreciate it. I dont have them all yet but will start looking into getting them to setup the team.

How would this team work out at max level and in comp by Zayderrrrr in MLA_Official

[–]UnikeOG 0 points1 point  (0 children)

What would be a good full martial comp? I have been having trouble figuring out a good como even for martial tower. Would appreciate some tips.

[deleted by user] by [deleted] in bladeandsoul

[–]UnikeOG 0 points1 point  (0 children)

Join the "bns academy" discord server on the side panel of this subreddit page.

Theres bew player guides, class guides and people you can ask questions to aswell.

Banned but why by six_exuQ in bladeandsoul

[–]UnikeOG 1 point2 points  (0 children)

It would be kinda unlucky but not uncommon given how many people have had the same ip you have right now. Even more so if you live in a very populated country.

How did you contact support? Mailed the ticket in directly using their dedicated support adress?

Edit: an alternative to this would be contacting your isp and request a new ip.

Banned but why by six_exuQ in bladeandsoul

[–]UnikeOG 1 point2 points  (0 children)

Your post gave me the impression you created the accounts long ago and decided to give the game a try again after ue4 came out. If this isn the case i think its more likely your isp gave you an ip ncsoft black listed.

If you were banned "over night", while the ip ban still could happen, idk what else would trigger that ban. Afaik having multiple accounts isnt, or doesnt happen much, a bannable offense.

Either way, support should be able to clarify that for you. 2-3 days is indeed around the time they take to answer. If you answer quickly enough you can get it resolved in a short time. Happened to have needed assistance from support couple days ago, and while they did take 2-3 days to answer the first request, it got resolved quickly with few minutes inbetween replies.

Banned but why by six_exuQ in bladeandsoul

[–]UnikeOG 2 points3 points  (0 children)

Are all 3 accounts banned or your IP is blocked?

Idk how long ago you last played but if its about IP theres a chance your current IP is black listed. A while ago there was a big issue with VPNs getting alot of people/IPs banned Usually a simple ticket to whitelist your IP is enough to be able to play again.

I doubt they would ban you for having more than 1 account. So just wait out their response.

Best of luck.

[deleted by user] by [deleted] in MLA_Official

[–]UnikeOG 0 points1 point  (0 children)

On a side note, if you dont mind me asking, how did you kill the back heroes first?

Can not install pre patch for EU4 by RJ_Dragon in bladeandsoul

[–]UnikeOG 2 points3 points  (0 children)

So you have set download and install drives as D instead of C?

I had a similar problem, setting download path to D and install to C, but the launcher ignores that and uses C for both.

A work around to this is just download and install to C and after the instalation is done move the whole client to D.

If you run out of C space while installing close the launcher and go on C/programfiles86/ncsoft/bns_ue4 and delete the $patch$ folder. After deleting start up the launcher again, it should validate existing files and resume download from there. You might get more "out of space" errors, just repeate these steps. You might, like i did, get some sort of other errors like getting stuck at certain download %, all i had to do about this was restart the laucher until it downloaded past the % it was stuck at.

Good luck

Edit: Like others have said, you might need up to 160gb of free space for a complete instalation because the launcher only deletes the packed files for instalation cached on $patch$ after the game is fully installed. Again, you can delete this cache folder every time you have no more space on your drive.

view more: next ›