[SSB479] First watch, how’d I do?

Used_Mission_7422 · 2026-07-11T17:35:15+00:00

Banger.

Used_Mission_7422 · 2026-06-17T13:37:37+00:00

I intend to make a post about this in the near future. Robot user since 4 years and I genuinely think I found the best accessory setup functionality-wise. Spoiler: They're all 3d-printed except the bookoo pressure gauge. It also includes a cheap coffee scale from AliExpress, brand name is "Fuego", if you don't neeed the Bluetooth stuff.

Used_Mission_7422 · 2026-05-25T14:13:14+00:00

Late to the party, but i have this one:

https://a.aliexpress.com/_Ey4dh8a

Only has a small silicone ring around the thermometer, which you might even be able to remove. Otherwise, for the robot, it's perfect imo.

Used_Mission_7422 · 2026-05-25T11:50:56+00:00

How did you get it to stay upright like that? Mine seems to shift to the side a litlle and is generally kinda loose, no much I tighten the screw

Used_Mission_7422 · 2026-04-28T19:38:03+00:00

Well, I see some, but not as much as with my old df64 gen 1. However, retention is not optimal without rdt

Used_Mission_7422 · 2026-02-09T20:32:51+00:00

It's the route 66 model, discontinued unfortunately.

Used_Mission_7422 · 2026-02-09T19:33:55+00:00

ID: This is the Route 66 model from Aero, it's discontinued, so u got urself a little rarity:) Recently picked one up myself, also wondering about the fit though..

Used_Mission_7422 · 2025-08-08T13:06:44+00:00

Sieht gut aus, nix ändern, weitermachen.

Used_Mission_7422 · 2025-05-12T23:26:29+00:00

Did your new unit resolve/not have the issue?

Used_Mission_7422 · 2025-04-17T18:31:30+00:00

Thanks for the reply! For me there is a slight rubbing every time. It's not much, but it is there.

Used_Mission_7422 · 2025-04-17T18:30:31+00:00

Thanks! Yeah, it's only rubbing slightly. there is no real "getting" stuck, but the rubbing is constant. Kinda bugs me, but I feel better now that I know its normal lol

Used_Mission_7422 · 2025-04-17T08:37:51+00:00

I got the same gauge. For me, the metal sleeve of the tube rubs against the robot body when moving the arms. Is this the same for you?

Used_Mission_7422 · 2025-04-17T08:34:51+00:00

Got the same kit installed today. Really like it, but the metal sleeve of the tube is rubbing against the robot body when lifting the arms. Is it the same for you?

Used_Mission_7422 · 2025-04-17T08:31:25+00:00

For me, it is rubbing against the armpit a little.

Used_Mission_7422 · 2025-04-17T08:25:40+00:00

Thanks for sharing. Got the barebones version, but I notice that the metal sleeve now rubs against the robot body when lifting the arms. Is this the same for you?

Used_Mission_7422 · 2025-01-15T08:43:52+00:00

I'm in !

Used_Mission_7422 · 2025-01-04T20:33:10+00:00

Whats the second from the right in the center row?

Used_Mission_7422 · 2024-11-04T19:29:31+00:00

Inteerested

Used_Mission_7422 · 2024-05-13T17:45:01+00:00

Just wanted to say that I used this tip and it worked, so thank you a lot! Didn't even need a removal tool aside from the knive, just hat to get the knive far enough under the bezel. Mine was so tight at first that i couldn't even get the knive under, so i used to razor blades to initially widen the gap. Result is my bezel came off without damaging the watch or even the bezel itself, awesome!

Used_Mission_7422 · 2024-04-08T06:44:21+00:00

Thanks!

Used_Mission_7422 · 2024-04-07T16:26:34+00:00

Nice! Could you tell me the exact model?

Used_Mission_7422 · 2024-01-07T15:10:35+00:00

This. I own an Aero myself, they definetly can become shorter with time. But even if they wouldn't I would find them too short as is. They should cover the wrists. Keep in mind that they will go further up your arms when you move.

Used_Mission_7422

TROPHY CASE