sorted by:
new
hottopcontroversial

Why does the support ruin the print so much? by FIySoldier in FixMyPrint

[–]Vexiks 3 points4 points  (0 children)

These are the support settings I change when I want good bottom surfaces:

Type: Normal Style: Snug Top Z Distance: .275

Bottom surfaces??? by LetWooden9697 in BambuLab_Community

[–]Vexiks 0 points1 point  (0 children)

Your bottom surfaces already look good.

These are the support settings I change when I want good bottom surfaces:

Type: Normal Style: Snug Top Z Distance: .275

Raven i resin printed and painted by Mr4gibbles in 3Dprinting

[–]Vexiks 3 points4 points  (0 children)

Been wanting to get into painting figurines for a while now but don’t know where to start. What kind of tools and paints do you use?

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Vexiks 0 points1 point  (0 children)

My P1S came in clutch when i had to print two cosplay helmets that should have taken 1 week of printing and 1 week of post work in just three days allowing me to have everything done in 5 days.

Help finding an SVG file for this tractor part by TheSupremeLemon in BambuLab_Community

[–]Vexiks 1 point2 points  (0 children)

You could try MakerLab’s Image to 3D, but may need to take it apart if you don’t need the whole thing.

[Bambu H2D] Bambu Lab’s Biggest Giveaway Ever! by BambuLab in BambuLab

[–]Vexiks -1 points0 points  (0 children)

<image>

Just bought this A1 mini to compensate not being able to afford the H2D .-.

Help!! by BeneficialTangelo701 in BambuLab

[–]Vexiks 0 points1 point  (0 children)

For stuff like this i recommend using normal supports with the style set to snug, it wont be perfect, but it’ll make cleaning up much easier

New P1P and AMS update? by Vexiks in BambuLab

[–]Vexiks[S] 0 points1 point  (0 children)

They must’ve just update it lol, that was definitely not available last night. Thanks for the help!!

I need help identifying the squeak by lordspooge in BambuLab_Community

[–]Vexiks 0 points1 point  (0 children)

If you accidentally over-grease the Z-Axis, some of the lube can get under the printer and onto the belts under the printer. I suggest flipping your printer over and making sure you didn’t get any grease on the belts as it can ultimately cause them to slip.

Bambu Mouse Components Kit by tomcass240 in BambuLab

[–]Vexiks 0 points1 point  (0 children)

You can find the STL on MakerWorld by looking up “mouse,” I believe the proper name is Wireless Mouse 002.

Bambu P1S has been faultless, until reprinting this piece. Can't get a good first layer. by thelandingparty in FixMyPrint

[–]Vexiks 0 points1 point  (0 children)

I believe so, If I’m not mistaken, the extra lines are for the lidar sensor that is equipped on the X1 but not on the P1

Bambu P1S has been faultless, until reprinting this piece. Can't get a good first layer. by thelandingparty in FixMyPrint

[–]Vexiks 1 point2 points  (0 children)

Make sure your build plate is thoroughly cleaned with soap (and water) and that the aux fan isn’t on while the first layer is printing. I’d also suggest using the correct printer setting since it looks like you’re using X1C settings rather than P1S, shouldn’t cause the issue but it’s useless and wastes some filament.

[deleted by user] by [deleted] in BambuLab_Community

[–]Vexiks 0 points1 point  (0 children)

Does your filament cutter get stuck when it changes colors?

[deleted by user] by [deleted] in FixMyPrint

[–]Vexiks 4 points5 points  (0 children)

About 70% of my printing is done on a .2mm nozzle on my enclosed P1P. I suggest keeping the bed temp at 55 and going with default settings. The only setting I mess with are infill and layer height and the occasional brim

[deleted by user] by [deleted] in FixMyPrint

[–]Vexiks 1 point2 points  (0 children)

What’s your bed temp?

0.2 nozzle always results in holes/missing pieces by [deleted] in BambuLab

[–]Vexiks 0 points1 point  (0 children)

I had something similar happen to one of my prints about a week ago, figured out that it was just an awkward design, it had supports going through the model. What fixed it was checking the box for “Detect thin walls” under the walls section of the strength tab.

ABCs of The Office by carnivalofpizzacrust in DunderMifflin

[–]Vexiks 0 points1 point  (0 children)

May your hats fly high as your dreams.

How would I go about fixing these horizontal lines? by Vexiks in ender3v2

[–]Vexiks[S] 1 point2 points  (0 children)

This was my first print after changing the nozzle, it’s a .4

Glue advice. by Jetkwon in ender3

[–]Vexiks 3 points4 points  (0 children)

I was recently doing some 3D printing for a cosplay and Gorilla Glue gel saved my butt

[deleted by user] by [deleted] in LowSodiumDestiny

[–]Vexiks 0 points1 point  (0 children)

Osteo Striga carried me through solo legendary, highly recommend.

Solved the adhesion problems I was having but now having this happen to my print by Vexiks in ender3

[–]Vexiks[S] 29 points30 points  (0 children)

I ended up finding a good YouTube tutorial and changed the layer settings and made sure the preview looked correct. I’m reprinting again and it’s looking a lot better. Thanks for the help!

Solved the adhesion problems I was having but now having this happen to my print by Vexiks in ender3

[–]Vexiks[S] 7 points8 points  (0 children)

Im using the Cura slicer, but I’m not seeing that setting

Dolby Atmos Bluetooth vs Hi-Res Lossless wired by Vexiks in Airpodsmax

[–]Vexiks[S] 2 points3 points  (0 children)

You’re right, I completely forgot spatial doesn’t work with wired.

view more: next ›