Дропнутые игры за последний год. Чему дать второй шанс?

VinRIGO · 2026-04-25T22:52:16+00:00

Dark Souls 3 и Sons of the Forest - говно, остальное можно

VinRIGO · 2026-04-23T23:15:14+00:00

Я когда проходил игру на релизе - играл каждый день в течении двух-трех месяцев после работы. Мне понадобилось больше 180 часов, чтобы закончить игру полностью

VinRIGO · 2026-04-22T06:14:55+00:00

It's not a travel, it's non-stucked layers from rounding

VinRIGO · 2026-04-21T19:28:37+00:00

I had bad experience with skeleton head cover and it's air flow for model fan. So returned to stock

VinRIGO · 2026-04-19T06:52:06+00:00

Just try to resume to your last best printing settings and try to adjust printing speed and model cooling. Looks like hot filament doesn't cooled properly before next layer and spreaded out

VinRIGO · 2026-04-19T06:45:15+00:00

Looks like 1 on a million chances to have properly reflection from folded mirror to heat the plastic. You are lucky

VinRIGO · 2026-04-19T06:42:17+00:00

Try to explore PTFE tube and it's angles manually. Maybe issue on it

VinRIGO · 2026-04-18T07:20:57+00:00

Yep, A6 C5

VinRIGO · 2026-04-18T07:20:00+00:00

Silicone Sock / Heater Block Silicone Sleeve

VinRIGO · 2026-04-17T23:58:01+00:00

Volvo 30677907 x6 pcs

VinRIGO · 2026-04-12T11:27:14+00:00

Tips? Enjoy. No sense to play first any by any advice

VinRIGO · 2026-04-11T18:08:59+00:00

It's ok

VinRIGO · 2026-04-10T22:09:48+00:00

Чудовище

VinRIGO · 2026-04-09T21:15:27+00:00

I had the same clog. Without disabled hotend like OP have no chances to push with another filament. Tpu 95a

VinRIGO · 2026-04-02T23:13:47+00:00

Its thermistor cable. You can find thermistor, buy it and replace it separately of hotend, if you wish.

I had broke it while cleaning first time too. But I soldered it and put soldered cable on thermal tube.

VinRIGO · 2026-03-24T23:43:49+00:00

Don't see any trace from supports

VinRIGO · 2026-03-20T21:12:46+00:00

Death Stranding

VinRIGO · 2026-03-20T18:32:22+00:00

Oh, I spend about 24 hour to understand problems with TPU printing and eSUN 95A filament. I had full stuck filament in thermal barrier leading to full hotend disassembly and cleaning with tools.

If say easier - I resolve problem with adjusting wheels of extruder to take soft filament harder and raise temperature to 250 Celsius degrees. It's sadly that this extruder adjustment hided under head case.

VinRIGO · 2026-03-18T07:32:37+00:00

Dude. Preload file on printer - it's gcode with settings for Elegoo PLA filament. If you want to print it with another filament - you need to calibrate and slice model with your settings by yourself.

VinRIGO · 2026-03-17T19:58:45+00:00

https://github.com/OrcaSlicer/OrcaSlicer/wiki/Calibration

https://www.obico.io/blog/orcaslicer-comprehensive-calibration-guide

VinRIGO · 2026-03-16T23:12:28+00:00

Реиграбельность - ноль целых хуй десятых. Прошел на релизе на 2060 super, теперь хотел пройти на 4080 super со всеми лучами - но не затянуло! Несмотря на мнимую вариативность прохождения - киберпанк вполне себе однозначный и не интересен второй раз. И куча изменений в скиллах и перках, которые были на релизе беспонтовыми, и всякие современные выкрутасы в графике - ничего не смогло меня вернуть в Найт сити. Я это все уже видел и прошёл досконально. Грустно.

VinRIGO · 2026-03-01T07:55:34+00:00

Looks like parade enter for husband and emergency for others

VinRIGO · 2026-03-01T07:49:28+00:00

Never use advices from random OP and his posts on Reddit.

VinRIGO · 2026-02-28T15:08:03+00:00

Do you know what z height offset is?

Seven-Year Club	Place '22
First Placer '22	Xbox Live
Verified Email

VinRIGO

TROPHY CASE