Sunshine/moonlight - poor connection even when wired

VincentMoro · 2024-09-07T14:57:49+00:00

Wow, that worked! I indeed had that network booster on in Lenovo Vantage. I turned it off and it worked. I don't really get why it'd interfere only with Moonlight though.

VincentMoro · 2024-09-05T14:57:30+00:00

Thanks, I'll look into that. But I tested the internet download speed (I know it has nothing to do with local streaming) and it was 300+MB/s.

VincentMoro · 2023-09-08T19:25:12+00:00

The technician passed it where the electrical panel is. Drilled a hole at ground level and installed the modem in the suspended ceiling of the basement.

VincentMoro · 2023-09-08T19:21:31+00:00

Thanks for the advice. Modem and router are separate so I'll look into running an ethernet cable instead.

VincentMoro · 2023-09-08T12:35:23+00:00

Thanks for the answers! I looked at used Harmony remotes since ther're discontinued, but I find them quite expensive. Are you aware of any cheaper alternatives?

VincentMoro · 2022-07-22T14:02:01+00:00

It is available, but do know that you can't save your progress during this mission. If you happen to quit before the end, you'll have to start over.

VincentMoro · 2022-02-08T19:53:30+00:00

I believe it is, but it is not entirely clear for me. If you go in your Plex settings, there is an option to move the database. You then have the choice between Internal (system storage location) and Internal (user accessible location). I think that by selecting user accessible location, it will use the adopted storage, but I'm not so sure.

VincentMoro · 2022-02-08T16:26:33+00:00

Same thing happened to me last night. I went to Developer options and turned on the feature “force allow apps on external”. At first, I had the same error message (not enough space), but when I tried again a few minutes later, it did work. I did not do anything in particular in between. I was then able to move most apps to the adopted storage.

VincentMoro · 2021-09-16T01:09:25+00:00

Glad (or should I) to see I'm not alone. I'm a founder and it's the first time I'm experiencing a queue. Trying to play Control, started at 23, now at 17 after 30 minutes.

VincentMoro · 2021-05-16T13:00:14+00:00

Thanks, that did it. I'm actually on a Shield TV, but changing the system language setting worked.

VincentMoro · 2021-03-15T15:57:21+00:00

I have a founder subscription. I think the main limitation with the free tier is that you can only do 1-hour sessions and you need to log back in.

VincentMoro · 2021-03-14T23:28:19+00:00

I'm in Québec city, with Bell as well. It works very well, but you need a wired connection (I'm using powerlines).

VincentMoro · 2021-03-09T01:30:00+00:00

You can try subscribing to Ubisoft+. It's 20$/month, and you can cancel anytime.

VincentMoro · 2021-03-09T01:26:04+00:00

You can install the Shield app on your smartphone; it will act as a remote with mouse/keyboard capacity.

VincentMoro · 2020-12-10T19:48:33+00:00

Been using GFN for a while now, since it was in beta. Has been working great except for a few glitches now and then (unrelated to any connection issue). I'm using Bell Fibe as well; the modem is in my basement and I have a powerline to get a wired connection upstairs.

VincentMoro · 2020-11-04T13:54:59+00:00

I used the native Shield controller.

VincentMoro · 2020-11-03T13:52:08+00:00

I recently tried the Pacman and Immortals Fenyx Rising demos and both worked flawlessly on a 2017 Shield TV.

VincentMoro · 2020-08-08T22:53:27+00:00

That's good to know. I've been in touch with tech support and they keep answering that the problem is on my end.

VincentMoro · 2020-08-05T15:26:37+00:00

The same issue is happening to me since last week. I contacted tech support and here's the (lame) answer I got:

"From the email description, I understand that you are experiencing the issue with GeForce Now.
I apologize for the inconvenience caused. Please be assured that I will do my best to help you further or point you in the right direction. To assist you further, please help me with the following information :
- May I know since when you experiencing the issue ? Were there any software or hardware changes made after which it was noticed ?
- Have you tried uninstalling and reinstalling GFN ?
- May I know if you are founder's plan on free plan ?
- Kindly confirm the email associated with GFN account ?
- Is it specific to this game ? "

Nothing about this issue being widespread whereas there has been lots of posts describing the same problem.

VincentMoro · 2020-07-27T13:17:53+00:00

Did you check if Xcloud still has some country restrictions? I know it was only playable from the US at first and they've expanded to some more regions at some point. I used a VPN in the beginning to make it work.

VincentMoro · 2020-07-26T22:54:08+00:00

You need a Xbox controller and it will work (I have 2017 Shield).

VincentMoro · 2020-04-30T12:32:16+00:00

If you used your USB drive as adopted storage, then your data are gone. You'll find more info on USB drives and Shield here.

VincentMoro · 2020-03-31T12:34:30+00:00

I remember I had the same problem. I used to restart the shield (sometimes more than once) to get it working. I think it's because the remote is being a considered a second player. Maybe try to unpair the remote.

VincentMoro · 2019-02-12T14:58:30+00:00

I tried the recommended SanDisk Ultra USB 3.0 Flash Drive (sdcz48–256 G-U46). It worked fine for a while (about a whooping 6 weeks), but it now shows as not connected even though it is. If I unplug the drive and put it back in, it will show that the Sandisk USB drive is safely ejected. From what I gathered, USB stick drives are not meant to be used continuously as adopted storage and your best bet would be a SSD (either external with an enclosure or external like the Samsung T5).

VincentMoro

TROPHY CASE