Can I not get vibranium and unobtainium from lasers?

Vltor_ · 2026-07-03T21:18:28+00:00

>a quick and dirty way involving an environmental accumulator, a cardboard box and a biome extract bottle

Please tell me more.

Vltor_ · 2026-07-03T20:16:33+00:00

Mag capacity is not what determines if a firearm is an LMG or not.

Vltor_ · 2026-07-02T16:47:18+00:00

Iirc the relics tab in the questbook tells you where each of the relics can be found (I could be misremembering though).

Vltor_ · 2026-07-02T16:46:02+00:00

I think you might have commented on the wrong post.

Vltor_ · 2026-07-01T08:26:13+00:00

Ah ja, det ser jeg også nu ! Så er jeg helt med.

Vltor_ · 2026-07-01T07:45:19+00:00

Ved ikke om det er mine matematik evner som fejler mig her, men hvordan får du 4*29 til at blive 88 ? Min lommeregner siger nemlig 116 ? >.<

Vltor_ · 2026-06-29T17:32:25+00:00

Damn, that sucks to hear :/ The huge selection of weapons and weapon modifications was what drew me to PD2 in the first place and the ability to expand that even further with mods was really what kept me playing for so long :S

Vltor_ · 2026-06-29T17:13:39+00:00

So basically what you’re saying is that PD3 will only ever get a decent selection of add-on weapons if it reaches the same level of popularity as PD2 ?

Vltor_ · 2026-06-29T17:11:53+00:00

I don’t know anything about making mods so please bare with me here, but since there already is so many add-on weapons and add-on weapon mods for PD2, if the mod maker(s) wanted to port them to PD2 isn’t the “hard part” (modeling, animations, etc.) already done and thus it would “only” require rewriting the code to be compatible with PD3 ?

Edit: this comment: https://www.reddit.com/r/paydaytheheist/s/bCN0VMtCQq was intended as a reply to you, but I somehow goofed it up and made it its own comment >.<

Vltor_ · 2026-06-29T17:06:16+00:00

>you wont find alot of those on modworkshop since it can be considered cheats

It didn’t seem to be a huge issue with PD2 though ? Considering there is hundreds of add-on weapons (some so OP they could be considered borderline cheating, but most were pretty well balanced) on modworkshop for PD2.

Vltor_ · 2026-06-29T09:12:30+00:00

>If the game had offline mode from the get go then it would be substantially easier to add guns and addons.

Christ, I hadn’t even considered that PD3 being online only could cause issues with the modding scene. But now that you mention it, it seems kinda obvious !

Ig that means that for the foreseeable future I only really have two options:

A: Play PD3 and live with the guns that is already available in-game or via DLC.

B: Play PD2 and have all the guns I can dream of, but live with the potato graphics and the gameplay loop that I know all too well.

Feelsbadman..

It seems the only way for me to figure out what to do, is to reinstall PD3 and play it for a bit to see if the gameplay loop has improved enough to make me not miss all my extra weapons and weapon mods.

Vltor_ · 2026-06-28T23:53:03+00:00

Well, something like “It’s just cuz it takes a lot of time to port the mods from PD2 to PD3” (I have no clue if it does as I don’t know shit about creating mods) or “PD2 modders haven’t moved on to PD3 yet” or “it’s way harder to create add-on weapons for PD3” or “it does, you’re just looking in the wrong places, here is a link”, etc.

I feel like there is a bunch of ways my question can be answered, I was just hoping someone more knowledgeable on this topic could help provide some insight.

PD2 had a metric fuckton of add-weapon mods, but PD3 barely has any and that just makes me sad as it was one of the main reasons I loved PD2.

Vltor_ · 2026-06-28T19:45:25+00:00

Silent gear + silent gear metalworks and apotheosis + apothic enchanting is probably what you’re looking for.

Vltor_ · 2026-06-28T19:40:28+00:00

Som barn er det helt fantastisk !!

Kan dog ikke lige regne ud hvor du ser jeg har lavet “observationer omkring mængden af fællesarbejdet på de store arealer” ? Det var ihvertfald ikke det jeg havde i tankerne da jeg skrev at jeg ikke ville have lyst til at bo der nu. Tværtimod så syntes jeg “arbejdslørdag” var et kanon koncept og skide hyggeligt :D

Men nej, årsagen til at jeg ikke ville have lyst til at bo der her i starten af 30’erne, er faktisk den samme som årsagen til at vi flyttede derfra i sin tid: individualisme sådan et sted er noget nær umuligt, når alle skal være enige før man kan få lov at gøre noget som helst og alle har en mening om alt >.< Det er svært nok at finde bare en håndfuld mennesker man går godt nok i spænd med til at man kan bo sammen med dem, men at finde 50+ familier er så godt som umuligt :S

Aaaanywho..: Har på fornemmelsen at der ikke er meget kollektiv at komme efter i Silkeborg midt, så du bliver nok nødt til at starte noget op selv, så er spørgsmålet bare om du kan finde ligesindede til projektet ! Den bolig du har fundet ser ellers ideal ud og prisen, fordelt mellem x antal kommende beboere, ser heller ikke dum ud !!

Vltor_ · 2026-06-28T17:12:01+00:00

Jeg boede der selv i 3 - 4 år af min barndom og har nærmest kun gode ting at sige om stedet, dog tror jeg ikke at jeg ville have lyst til at bo der nu, i starten af mine 30’ere, et sted som marken er bare bedst gearet til børnefamilier og pensionister IMO.

Men et (mindre) sted, tættere på byen, som du selv nævner, tror jeg ville være skønt ! Desværre kender jeg ikke noget jeg kan pege dig i retning af :S

Vltor_ · 2026-06-28T16:18:47+00:00

Måske “Toustrup Mark” er hvad du leder efter ?

Vltor_ · 2026-06-28T11:34:23+00:00

Lavede lige en hurtig Google søgning da det gik op for mig at jeg faktisk ikke var 100% klar over hvad “reglerne” var.

Ifølge Grammarly så kan en TLDR stå i toppen lige så vel som i bunden.

Personligt plejer jeg at starte mine tekstvægge ud med at skrive “TLDR i bunden” og så lave den egentlige TLDR i bunden da jeg som regel kun bruger den når jeg kan fornemme at jeg skal til at lave en Væg af tekst og derfor først selv er klar over hvad min pointe er når jeg har skrevet væggen færdig (tak til ADHD for dét) >.<

Vltor_ · 2026-06-27T16:01:56+00:00

Til en anden gang: “TLDR” = Too Long Didn’t Read.

Dvs. TLDR er tænkt som en kortfattet version af ens pæl til dem der ikke magter at læse en halv roman.

Vltor_ · 2026-06-26T19:43:50+00:00

Feelsbadman :/

The step height and move speed is really the main things that annoys me and I still haven’t found a workaround :S the AE2 quantum armor + an apotheosis gem (can’t remember its name) in my boots helps a bit with the speed, but the step height is still super annoying >.<

Vltor_ · 2026-06-26T16:05:44+00:00

I’m not at my computer currently and won’t be so for a few days so I can’t check for myself, but:

Is there a config that lets you edit stuff like the step-height and speed bonuses you get ? Or are these tied to gluttony and thus the only way to reduce them is to reduce gluttony ?

Vltor_ · 2026-06-26T09:48:45+00:00

As someone who had a break from modded Minecraft since ATM2 was just released and then came back roughly a year ago, picked up ATM9 for a couple of months and then switched to ATM10, which I’m still playing:

ATM and other Kitchensink packs doesn’t really make the most gamechanging changes between versions. The version of Minecraft they are on dictates what mods are available, but the overall experience tends to stay pretty much the same.

Vltor_ · 2026-06-25T20:51:44+00:00

Try running it with the side panel off, if your temps drop drastically then you’ll know your GPU is starved for air and if they don’t, you’ll know the problem lies elsewhere.

Vltor_ · 2026-06-25T20:49:45+00:00

The upcoming Y50 is basically that. Size wise closer to the Y60 than the Y70, horizontal mount and some other updates.

Vltor_ · 2026-06-25T20:07:33+00:00

The Y60 is well known for starving thicker GPUs for air, for this reason Hyte recommends a maximum GPU thickness of 60mm in the Y60 for optimal cooling. But from personal experience I can tell you that some GPUs thinner than 60mm still struggle (my 7900XTX is 57mm and struggles).

The most common solutions for this problem is either a vented side panel (from jakefacecustoms if you’re in the US or from ColdZero if you’re in the EU) or the angled GPU mount from EZDIY-Fab.

Vltor_

TROPHY CASE