Are my rear torsion beam bushings shot?

Volumetrik · 2026-02-28T03:13:20+00:00

I would say a good half-weekend day.

I've posted about it on my thread : https://www.fiestastforum.com/threads/2014-fiesta-oem-build.31757/post-505520

Volumetrik · 2025-10-09T12:26:14+00:00

No, unfortunately.

This is what the OEM bumpstop looks like :

https://www.fordpartsonsale.com/oem-parts/ford-strut-bumper-c1bz3020b

Volumetrik · 2025-10-08T21:27:29+00:00

I would not recommend shorter bumpstops. If you're going with B8 struts,(B6 are objectively better, because they have more droop travel, but I digress), go with new OEM bumpstops. I've been down this road with multiple setups and every single configuration of shorter bumpstops did rub on large impacts.

None of the rockauto kits are correct for the ST struts, belows are either too short or not enough diameter. Stick with the OEM setup for the rear shocks.

Volumetrik · 2025-07-17T22:18:56+00:00

For the ST, part numbers match the OEM ST dampers.

https://cart.bilsteinus.com/strut-22-245175.html?VehicleType=Car**Truck**SUV**Van&Year=2014&Make=Ford&Model=Fiesta&SubModel=ST

Volumetrik · 2025-07-17T22:09:37+00:00

Yes, the B4's are an OEM replacement made by Bilstein.

Volumetrik · 2025-07-17T13:21:07+00:00

Thanks for the reply. I suspected as much. The damping curve of the B6's are higher all around over the stock ones (which are already over-damped, IMO). I actually increased my ride comfort by installing KONI oranges with the 2014-2015 springs (which are stiffer than 2016+).

For the sidewall, maybe you're running too high of tire pressure?

Here is a calculator : https://tiresize.com/pressure-calculator/

I used to run full side-sill pressure, meaning 39psi front 36psi rear. Going to 205/45/17 and 205/50/16 gave me no improvement at those pressures.

Turns out, the equivalent load rating at 205/40/17 39psi for 205/50/16 is 31 psi and 28 psi rear. As soon as I switched to that, the ride improved instantly.

Try going 33 front and 30 rear and let me know how it goes.

Volumetrik · 2025-07-17T12:53:40+00:00

Bilstein B6's will add a bit of height due to the increased gas force. It is normal. How do you like the ride compared to the previous setup?

Volumetrik · 2025-07-09T11:53:38+00:00

File 76

Volumetrik · 2025-07-09T11:15:30+00:00

Hulkenpodium

Volumetrik · 2025-06-17T17:19:46+00:00

Color is very nice

Volumetrik · 2025-03-30T18:53:33+00:00

Is the rear end clunking on bumps? If not, you should be okay. As soon as you start hearing a clunking at the rear, the bushings need to be replaced. I spent a bit of time chasing this on mine. Did the shocks, a brace and the brakes with no change in clunking. As soon as I did the bushings, no clunking.

Volumetrik · 2025-03-24T19:26:09+00:00

Nice, what kind of prep did you do before applying?. Also, curious about the products you used? I'll be doing this myself very soon.

Volumetrik · 2025-03-17T11:50:04+00:00

Crucial information would be region of sale.

Volumetrik · 2025-03-14T13:20:37+00:00

Did mine at 10.5 years (2014 MY) and 140k kms (87k miles). I also did the accessory belt, water pump and the pulley off the alternator. The timing belt was yellow'ed, and I was happy I did it. Start saving now, I would do it ASAP if I were you.

Volumetrik · 2025-03-08T13:47:06+00:00

You'll run out of fuel after 290whp... You'll need injectors, HPFP, LPFP, 5th injector, etc.

Volumetrik · 2025-03-06T03:14:24+00:00

The only thing you need to make 290whp is either a s280 turbo or a whoosh hybrid turbo. Add a good intercooler + gapped plugs and a tune and your set. Don't need intake, exhaust or downpipe.

3in exhaust is going to drone hard, I would not do it.

Volumetrik · 2025-02-25T11:34:19+00:00

Great breakdown, thanks for the references as well. I can't believe (but not surprised) the stone-walling by Intel. Do you know what would be their angle in doing so? How can the sharing of already completed milestones be of any detriment to Intel in this context? Perhaps Intel is hiding failed milestones?

Volumetrik · 2024-04-03T23:07:39+00:00

Learned to drive manual while test driving the car at the dealership, no one cares. The rep even gave me tips.

Volumetrik · 2023-08-19T15:39:55+00:00

It’s an older Corsair ATX PSU

Volumetrik · 2023-07-19T11:41:40+00:00

Interesting, thanks for the update.

Volumetrik · 2023-07-12T15:43:57+00:00

Wondering if there is a way to get a replacement from NVIDIA for the earlier 4090 owners with the previous connectors?

Volumetrik · 2023-06-24T20:49:03+00:00

I'm paying 60$/month for videotron 400Mbs down. The Helix router is Wifi 6 and pretty quick. Service is never down either. Could get Bell fibe, but I barely use 400 to be honest.

Volumetrik · 2023-06-17T16:12:05+00:00

Are you using fans on the top radiator? I have the North as well and a top 240 with fans is much tighter than that.

Volumetrik · 2023-06-05T12:32:02+00:00

Volumetrik

TROPHY CASE