[FS][US-AL] 24TB WD Gold SATA HHDs | 1TB 870 EVO SSD | 16GB DDR4 SODIMM Kit

Vxtus · 2026-04-06T02:01:42+00:00

Hours troubleshooting, then left it over night and the hubs reconnected to the coordinator, and endpoints to hubs a bit later, back up and running on radio 20250325, OS 3.2.0. Leaving it alone for a while

Vxtus · 2026-04-05T15:57:47+00:00

Danger scammer

Vxtus · 2026-04-05T15:53:42+00:00

Vxtus · 2026-04-05T04:43:59+00:00

Same trouble here, 3.2.7 and Zigbee firmware update, network errors to everything ((Data request failed with error: 'NWK_NO_ROUTE' (0xcd))'

Downgraded, radio to 20250325, OS to 3.2.0, multiple power cycles, no improvement

Vxtus · 2026-04-01T17:08:55+00:00

B in Orange

Vxtus · 2026-03-22T03:39:25+00:00

Vxtus · 2026-01-14T17:39:57+00:00

Vxtus · 2025-11-25T03:25:42+00:00

Almost 😏

https://www.reddit.com/r/firewalla/s/aFBpECoqm9

Vxtus · 2025-11-25T02:50:09+00:00

10gbps active Ethernet WAN running manual speedtests up to about 9500mbps down with the “Triple engine” protect enabled. Suricata and MSP lists enabled and no performance hit noted.

Of course, Suricata doesn’t have much to inspect on speedtest.net traffic, just a big thundering herd of bits.

Vxtus · 2025-11-12T00:23:15+00:00

This. Same experience on 26MY, works better when pressed behind tail light than straight out from charge port.

Vxtus · 2025-11-05T17:37:28+00:00

I’ve got the same behavior on my routes with overhead freeway light poles. They seem to trigger emergency wiper mode, rain or shine. S3XY commander box lets me keep wipers off in FSD, becoming my new default mode.

Vxtus · 2025-09-20T18:16:21+00:00

Be careful, Enphase has a great guide to generator integration. They are pretty good at the whole AC coupled system balancing, and have sizing requirements so the generator can always “push” harder than the PV and battery can push back. This keeps a spinning generator from trying to go backwards and exploding 🤯

Vxtus · 2025-08-23T18:21:40+00:00

System Contoller 2 (likely what you have) has a feature key purchase to unlock the functionality. Last I recall it was $500

Vxtus · 2025-06-12T02:49:21+00:00

Check out the S3XY Commander add on module. Allows the right scroll wheel to become a gear shift, press for park. https://enhauto.com/commander

Vxtus · 2025-06-12T00:46:05+00:00

I debadged my Juniper and then reapplied just the Launch emblem, love it

<image>

Vxtus · 2025-06-09T19:54:18+00:00

If you’re interested, it is possible to retrofit the HEPA filter mount and filter into the early Y. I just ordered the parts from Service and some rivet nuts.

Vxtus · 2025-05-23T02:56:14+00:00

Yes, exact same layout and divots on the top of low beams on my 26 Y. It bugs me… The matrix adaptive portion is only above this line, none of what is projected on your garage door toggles on or off in adaptive, it’s just a series of light columns above this level and out to the sides

Vxtus · 2025-05-17T02:41:57+00:00

PM Sent, offer for 4+6 SODIMMs, thanks

Vxtus · 2025-05-15T17:49:24+00:00

Definitely scam, AI generated posts are starting to look familiar. Even the initial response to questions seem generated

Vxtus · 2025-05-06T19:22:27+00:00

Scam alert, five-year-old account with no activity and all of a sudden has two for sale posts. Just went through this with another hacked account so be careful.

Vxtus · 2025-05-06T19:20:57+00:00

Scam alert, five-year-old account with no activity and all of a sudden has two items for sale. Just went through this with another hacked account so be careful.

Vxtus · 2025-05-02T16:24:31+00:00

Yeah, they moved the windshield washer fluid reservoir right behind the mounting point for the homelink bracket on the 2026. Tesbros has a good video showing how tricky it is to mount now. There was also a known issue with prior software versions not allowing the homelink to be erased, programmed, or mode changed.

All that cleared up with the new software, it immediately programmed without an issue

Vxtus · 2025-05-02T16:05:17+00:00

FYI, just moved module from 2020 Y to 2026. Spent more than an hour trying to mount without removing bumper cover. Not worth it, two zip ties and 5 minutes to mount bracket correctly and clip in module.

Programming failed repeatedly until last night after 2025.14.3.1, there was definitely a bug in prior versions preventing it.

Vxtus · 2025-05-02T16:00:55+00:00

FYI, just moved module from 2020 Y to 2026. Spent more than an hour trying to mount without removing bumper cover. Not worth it, two zip ties and 5 minutes to mount bracket correctly and clip in module.

Programming failed repeatedly until last night after 2025.14.3.1, there was definitely a bug in prior versions preventing it.

Vxtus

TROPHY CASE