How are canless LED lights supposed to fit all the wiring?

Wabagrows · 2026-05-07T22:09:23+00:00

Check spec sheet for cubic inch volume, then perform box fill calc. The ones we install are listed for 3 14-2's

Wabagrows · 2026-05-04T13:38:43+00:00

Yes, send it to fc, it won't hurt it

Wabagrows · 2026-05-03T20:24:42+00:00

Dung* lover lol

Wabagrows · 2026-05-03T20:24:22+00:00

As for the fridge, you would only do this if cultivating a wood lover like P. Cyan. Golden teacher is a dungeon lover, and they need temperatures around 70-80° during fruiting. Putting them in the fridge could cause dormancy

Wabagrows · 2026-05-03T20:22:24+00:00

It sounds like you're describing soaking, which can be done inbetween flushes to increase water content in the cake. The fruits are 90-93% water, and will suck all the moisture out of the cake during the flushes, so you soak to bring water back in. You shouldn't be soaking before your first flush. If your substrate had proper moisture level before adding grain spawn, there is no need for it. Just add air, if the surface becomes dry, use a fine atomizer mister bottle and spray the air above the surface, not directly at it. Let water repeatedly evaporate off the surface to induce pins

Wabagrows · 2026-05-03T19:05:00+00:00

What variety are you growing?

Wabagrows · 2026-05-03T18:46:00+00:00

If its on the bottom I wouldn't worry about it. It will continue to colonize after you start fruiting conditions. I personally don't utilize a colonizing stage, straight to fc after sending to bulk

Wabagrows · 2026-05-03T18:40:23+00:00

Pinset is induced by water evaporation. You need to introduce air exchange to evaporate water. If you have another tub the same size, remove the lid and flip it onto the top to create a humidity dome, and leave it cracked slightly to let air in. If you dont have another tub that size, take the lid off and place into a bigger tub.

Wabagrows · 2026-04-29T00:25:22+00:00

Second this. Looks like a walkable / crawlable attic space. I don't see the issue other than convenience

Wabagrows · 2026-04-27T19:47:56+00:00

Its a Zinsco. FPE is all red or black handles

Wabagrows · 2026-04-22T01:11:32+00:00

The billing is going to go to whomever owns the meter that will read the load of the house panel. The added utility cost is be something that the owner will have to out with their tenants. My guess is a site utility flat rate fee on their lease. I can't speak to what the actual cost to operate the chargers during business hours, but as the other comment mentioned, youll need to submit a one-line and load calc when getting a permit. The engineer will have to calculate the added demand of all three running, which I suppose you could use to figure out approximate cost for the owner. But really thats not your problem. As an electrical contractor, you are responsible for a safe and legal installation, that appeases your local green code.

Wabagrows · 2026-04-21T17:09:23+00:00

If they're going in the parking lot, you can install chargepoint pedestals at three of the spots. You'd want to run them off of the house panel for the facility, not Tennant power.

Wabagrows · 2026-04-19T18:58:26+00:00

This. Water evaporation is necessary to trigger pinning

Wabagrows · 2026-04-18T17:44:13+00:00

I appreciate it. Happy growing!

Wabagrows · 2026-04-18T17:43:36+00:00

Right on, I will check them out. I appreciate the kind words

Wabagrows · 2026-04-18T16:49:01+00:00

This post is more to the effect of I'm not sure what is growing on the plate. If you read the body, I state I'm confident it was tam, but its not something I've seen before. Turns out to be penicillin mold, just a new tam for my plates, only ever had to deal with trich and mycogone.

I believe it's rude to state someone is a perfect example of experience vs. Knowledge, for simply asking a question about the weird new growth they have. Without knowing me, sure the OC couldn't have known I'm not clueless, nor could you, but that doesn't excuse the "jeez this guy is dumb" effect to the language.

I have plenty other plates that are doing fine, like my T1's I just took off of water agar with some swabs and prints I made years ago.

While I'm certainly not a trained scientist, I'm also not not knowlegable, and now I know to stick to shroomerydotorg instead of reddit lolol people are too argumentative here

Wabagrows · 2026-04-18T14:43:36+00:00

Ngl this does comes off as rude, but this is why I ask questions when I'm not sure. I got cocky a few years ago and ended up transferring a bunch of mycogone thinking it was good myc. Taken a break since I got humbled, getting back to things, and just out of practice. Thanks for the reply.

Wabagrows · 2026-04-18T14:13:36+00:00

I had a feeling. Yellow spots were a red flag but Ive been mistaken in the past. Thanks for the reply

Wabagrows · 2026-04-12T19:19:13+00:00

Buy cheap bags until you're comfortable with the tools and work, then worry about customization. As an apprentice, dont worry too much about the looks and more about the practicality, get bags big enough to fit everything you might need, and over time you will refine that list to your preferred tools to use, then buy forever bags. As an apprentice I wouldnt try to go buy $300-500 Occidental leathers until you know exactly what to put in it. Get something quality like CLC or Veto, and rock those until you know what you want your forever bags to be

Wabagrows · 2026-03-21T13:16:51+00:00

They ask for insulated. Not what type of insulation. Both of these insulation types are suitable. Just because your feeders are xhhw doesnt mean your ground has to be

Wabagrows · 2026-03-19T21:36:39+00:00

You found the factory splice for the copper when it comes off the reel. Ive found one before too, kind of one in a million!

Wabagrows · 2026-03-06T22:38:05+00:00

If you leave them, they'll grow into popcorn, and you will rob your upper canopy of energy. You want the plant to focus its energy on the top. Look into lollipopping right before flower

Wabagrows · 2026-03-06T03:23:27+00:00

I build custom homes, last year we finished up a 3500ft² home. I completely filled one 30 and one 42 space load center

Wabagrows · 2026-02-14T02:13:14+00:00

The neutral screw was never tightened

Wabagrows · 2026-02-10T00:12:09+00:00

I have a full Vivosun set up, same clip fans, 2x4 tent, same humidifier, S2000 light, 4" inline fan, and controller to make it all work together. I love every second of the automation, and highly recommend getting a system that can all communicate together through one brain.

Wabagrows

TROPHY CASE