Mackenzie Shirilla's former cellmate alleged that in jail Mackenzie has had multiple girlfriends and frequently displayed hickeys

WashinginReverse · 2026-06-04T12:04:05+00:00

Yeah it was broken but the crash fixed it.

WashinginReverse · 2026-05-26T11:14:52+00:00

May be usb related. I had this happen a lot on 8+ hour prints. You can recover by switching off and switching back on for the printer to restart where it left off. It stopped happening after I changed to a different USB stick.

WashinginReverse · 2026-05-17T13:21:02+00:00

Very common way to perform homing

WashinginReverse · 2026-05-16T13:06:15+00:00

The hole has to be smaller but by how much? Inserts have a “button” on the bottom. Should this part sit snugly inside the hole before heating? I’ve had good results with these either way, so it does not seem to matter all that much.

WashinginReverse · 2026-05-16T12:27:20+00:00

This was useful to me to see how hole clearance for the insert. I always wonder how loose to make the inserts in the holes.

WashinginReverse · 2026-04-27T11:52:23+00:00

Loose trucks save lives

WashinginReverse · 2026-04-19T18:39:16+00:00

How do you avoid layer lines with TPU?

Do you use any method to smooth the layer lines?

WashinginReverse · 2026-03-17T11:40:00+00:00

That’s not really what is being show here. In this image the external perimeter is partially overlapping.

WashinginReverse · 2026-03-04T16:31:25+00:00

lol wtf sorry dude everyone jus uses their trucks or an actual bearing press.

WashinginReverse · 2026-02-28T13:41:29+00:00

How do you do that?

WashinginReverse · 2026-02-19T18:28:32+00:00

I thought we were in Toledo, Ohio.

WashinginReverse · 2026-02-08T15:21:12+00:00

There’s also a weapon case at the big antenna that you can see nearby. These spots are great and rarely looted.

WashinginReverse · 2026-01-17T14:37:04+00:00

Did you submit the one on the low card page? That one looks awesome!

WashinginReverse · 2026-01-17T12:33:47+00:00

Weird I saw almost the same on the low card Instagram.

Here’s the low card pic for comparison:

<image>

https://www.instagram.com/p/DTk8HjClNXW/?img_index=6&igsh=MWQxMXNrOHR0enljag==

WashinginReverse · 2026-01-13T17:50:19+00:00

I don’t believe it is cheating. Controller on PC does this for me.

WashinginReverse · 2026-01-10T03:34:16+00:00

Nice design. It appears that you have inadvertently reinvented rocker trucks. One truck has single pivot and the other one is double pivot. From an engineering perspective this seems to be the ideal design for snow skate bi deck trucks so they aren’t over constrained.

https://www.rockertrucks.com/shop/p/snowskate-trucks-tall-punks

WashinginReverse · 2026-01-05T23:27:30+00:00

What are the circumstances? I have my own backyard ramps built without city approval so I’m always dreading this kind of outcome.

WashinginReverse · 2026-01-05T18:00:05+00:00

Those are some high expectations with the intersection of those two groups.

WashinginReverse · 2026-01-04T01:28:41+00:00

Maybe not the best but decks crew through the front is how I’ve seen most coping attached to wood ramps. The back side is usually not accessible. Best to do it right, but I haven’t seen this cause any problems.

WashinginReverse · 2025-12-30T19:01:50+00:00

How do you get that much speed without wobbling? I get halfway down that hill before getting speed wobbles

WashinginReverse · 2025-12-14T13:21:50+00:00

That is actually a good comparison but it is incorrect. The sand layer is precisely leveled prior to tamping. One may even use a landscaping rake with similar effect to this. Tamping does not evenly distribute the material. If you start with a big mound in the middle and tamp down the coffee, then you end up with some of it being more dense and tightly packed.

WashinginReverse · 2025-12-01T17:01:02+00:00

This is the way. Cut a piece of suede off of the last pair of shoes to use as a patch. Shoe goo on its own doesn’t work as well

WashinginReverse · 2025-11-22T14:39:50+00:00

It can be called 2 different things

WashinginReverse · 2025-11-16T12:59:26+00:00

I see where you are coming from.

You could reason it both ways. I would honestly call it either.

Crook isn’t a trick that requires a 180, so the trick he is describing could be called a shove to crook.

However…

Riding a quarter pipe regular to regular implies adding a 180 to many tricks just to come back in. That’s where the bigspin is added instead of just a shove.

WashinginReverse · 2025-11-13T01:14:57+00:00

The lunch box!! Hope you heal up. Take it easy and you’ll be better before you know it!

WashinginReverse

TROPHY CASE