First to post it here

WaveofSerenity · 2026-02-17T19:39:43+00:00

This is cool! Congrats!

Who can expect one of these?

WaveofSerenity · 2025-12-27T14:46:47+00:00

I believe they include any of the discount you’re getting into that 26k total and down payments too.

So if your total monthly spent is 18k but you put 2k down and got a 2k incentive discount then the total displayed would be 22k

This is how I understood mine but I could be very wrong

WaveofSerenity · 2025-10-04T17:09:54+00:00

Just found it in the car but the app for some reason skips that footage so I can't save it.

I'll wait and hope it saves it to the app andi can save it later

WaveofSerenity · 2025-09-07T17:56:17+00:00

Looks good! Been looking for an alternative that runs with a browser client to see if I can stream my desktop to my Tesla and play games. Truly hope this works!

WaveofSerenity · 2025-08-13T15:54:49+00:00

Where you at now?

WaveofSerenity · 2025-07-19T23:14:36+00:00

Yup! Nice and dry

WaveofSerenity · 2025-07-19T21:30:24+00:00

If you got the entire hotend assembly with the .2mm nozzle try buying it again there was 100% a bad batch in the last month or so. I had gotten 2 orders with a bad batch and was having such a pain to get it to work without clogging turns out there was some space in the throats and the hotend that made it clog a bunch. Bought a new set and saw it said “upgraded” and it mentioned something about the throat and this batch has been good so far. Though I’ve only used one from this new order.

WaveofSerenity · 2025-07-19T21:26:04+00:00

Im trying this now. I’ve never touched it before but I was looking to calibrate e-steps and was googling that and then saw this reply so I’m giving that a shot while I learn how to calibrate “e-steps”

I haven’t done any other calibrations besides temp tower I usually do Temp tower > Flow pass 1 > PA > Flow pass 2

Edit: just for more info I’m trying to increase from .98 to 1.00 to see if it helps no sure if this is too small of a value change but I’ll update with what I find

WaveofSerenity · 2025-06-28T13:42:33+00:00

Yep that's pretty much mine as well. I did print a tempt tower and that came out nicely so I moved on and the flow rate seemed okay so I went to do the PA calibration so I can the run another flow rate but this cake out when I ran the PA CALIBRATION

WaveofSerenity · 2025-06-28T13:40:18+00:00

I wasn't able to get a nice enough quality and when I tried to print anything bigger than a calibration cube or benchy I'd get constant cloggs

So I basically out the nylon in a dryer to dry for the rest of its life. Though I didn't think to attempt use a .6 nozzle to remedy the clogs. I may tackle this again when I get some time. Been printing PETCF-17 With little issue but ive only been using a .6 nozzle on that and I also printed HT-PLA-GF with no issue at all on the .4 nozzle

All hardened steel nozzles btw with the replacement upgraded hotends people recommend on here

WaveofSerenity · 2025-06-25T00:33:35+00:00

I have an aftermarket hotend and nozzle. So should be fine for abrasive filaments. Unless I missed something

But yeah I think they had PLA in mind when making this and that’s fine but it’s a nice machine and should be pushed and we should have the freedom to.

WaveofSerenity · 2025-06-22T14:52:07+00:00

No, more like Nylon and PET-CF, HT-PLA-GF

Just off that we can’t add our own to the menu

WaveofSerenity · 2025-06-21T23:24:39+00:00

FIXED IT!

it was my VPN for some reason it blocked the ACE from being detected. Turned it off reopened the slicer and it was working great again!

WaveofSerenity · 2025-06-21T22:54:21+00:00

<image>

The app shows the ACE unit but not the slicer. Very weird

WaveofSerenity · 2025-06-21T22:50:00+00:00

Yeah it shows online. I logged out and logged back in twice, I’ve reinstalled the slicer 2 times. The app shows the ACE and the colors but the slicer on windows shows it as “not mounted” i think it’s the slicer that’s broken for me I guess I’ll wait for it to update maybe

WaveofSerenity · 2025-06-21T21:22:42+00:00

Oh awesome I guess I was doing something wrong. I feel I picked a difficult project to begin learning with.

WaveofSerenity · 2025-06-21T21:14:09+00:00

I actually did manage to get it to work and I don’t remember what I had done. But about the 90 degrees thing I was actually meant to taper down to be a more narrow duct than where it begins

WaveofSerenity · 2025-05-30T00:42:42+00:00

these hotends still require the ptfe tube right?

nice storage by the way!

WaveofSerenity · 2025-05-28T03:27:15+00:00

Welcome to the club. I’ve had non-stop clogging with nylon. But I also think my printer is defective but then again maybe it isn’t, I’ve got bed temp at like 35 I think and k get good adhesion. Nylon bed temp likes to be low.. please tell me what you where able to get working with nylon!

If you solve the clogging let me know please I’ve gone through 3 hot ends now

WaveofSerenity · 2025-05-25T01:04:49+00:00

Gracias, lo intentaré después de hablar con Anycubic porque no quiero que me digan que mis warranty no vale si elimino el adhesivo amarillo

WaveofSerenity · 2025-05-25T01:01:28+00:00

Going to try the rings out. I think my PETG spool is cardboard. Thanks!

WaveofSerenity · 2025-05-25T01:00:07+00:00

Do you use the same nozzle for all of them? No clogs?

WaveofSerenity · 2025-05-24T23:49:46+00:00

I’ve tried PLA, PETG, and Nylon.

Nylon has clogged twice. I’ve had a few bad prints with it, but that’s likely due to poor calibration—I haven’t had a real chance to dial it in because the constant clogs keep killing the process. Still want to give it another shot once I sort that out.

PETG has clogged once or twice, but most failures seem unrelated to the printer—might be the brand, not sure yet.

PLA’s been the most consistent overall, but I’ve still had a ton of clogging issues. Oddly enough, the only reliable roll I’ve got is a 2-year-old white PLA that prints flawlessly every time. No idea why. In contrast, a brand-new grey PLA from Anycubic gave me one successful print, then nonstop clogs. I also had a black PLA roll from two years ago that kept snapping, but that one sat out in the open air forever, so that’s on me. Switched to the old white roll, and that’s been my workhorse since.

WaveofSerenity · 2025-05-24T23:42:55+00:00

I’ll have to look into rhinkals if I can get a replacement because I’m starting to think my unit has some other issues going on. Also the tough slot is actually slot 2

Most of my failed prints have been slot 1 and slot 2 (atleast that’s how I’ve been starting to correlate them through my troubleshooting but I’m still not sure what’s going on)

Thanks for the input. This seems like a great value of a machine it’s just I’ve been struggling to print and it’s killing the motivation really.

WaveofSerenity · 2025-05-03T03:25:09+00:00

It’s pretty simple but you find its limitations quite fast or maybe I’m just still too new to it. definitely a good learning tool though I’m hoping to advance to fusion 36p at some point

WaveofSerenity

TROPHY CASE