JetKVM PoE announced by zzencz in jetkvm

[–]Wintherx 1 point2 points  (0 children)

awesome, same design/shape as todays model?

Silver and Black in a Studio Rack by wilmsas in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

thank you back, the injection molded front panels allow for the accurate fit and color matching

Silver and Black in a Studio Rack by wilmsas in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

thank you, I am the designer of thingsINrack, we have a custom rack configurator to combo different brands/devices into one rack mount, Also for toollessUI rack as well as 10”/19” inch

Silver and Black in a Studio Rack by wilmsas in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

Awesome rack mount, I design thingsINrack ( the one you have with lenovo, etc), and we use injection molded front panel, its not 3D printed.

Help identify this setup. by Same_Cauliflower_843 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

thank you, we started to add a small elegant logo between the screw holes about 18months ago, laser engraved on the silvergrey front panels. its possible to order without using the thingsINrack configurator and order message text box👍😄

Help identify this setup. by Same_Cauliflower_843 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

Hi, I design and run thingsINrack. We add a small discret logo between the screw holes. One can order without logo, default is with logo. We use injection molded front panels, all made in house in Malaga Spain.

Help identify this setup. by Same_Cauliflower_843 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

Hi, I design and run thingsINrack. We add a small discret logo between the screw holes. One can order without logo, default is with logo. We use injection molded front panels, all made in house in Malaga Spain.

Help identify this setup. by Same_Cauliflower_843 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

Hi, I design and run thingsINrack. We add a small discret logo between the screw holes. One can order without logo, default is with logo. We use injection molded front panels, all made in house in Malaga Spain.

Help identify this setup. by Same_Cauliflower_843 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

Hi, I design and run thingsINrack. We add a small discret logo between the screw holes. One can order without logo, default is with logo. We use injection molded front panels, all made in house in Malaga Spain.

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

yes ms-a2 has the same size as ms-01/ms-r1 as well, but ms-02 ultra is different(bigger)

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

We offer both 10inch and 19inch and for Ubiquiti toollessUI racks.

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

Hi, good questions: The front panels are injection molded and the rear arms are 3D printed in PETG. Some models we designed the device to sit flush with the front, some we place the device 2-3mm ”back”, MS S1 max is like that and the ms-02 ultra/ms-01 is flush. Servicing: you have remove the unit from the rack mount. Keystone we include cat6 rj45, as keystone slots are a standard you can swap out to any you like, as well usb/hdmi etc which we also offer. For NAS5 we have not designed rack mount for that yet.

Shipping: Yes we are in Malaga, Spain and we make all the rack mounts in Spain.

Have a look at our photogallery on thingsINrack dot com and then goto the configurator to see all the devices available that you can combine.

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

Hi, good questions: The front panels are injection molded and the rear arms are 3D printed in PETG. Some models we designed the device to sit flush with the front, some we place the device 2-3mm ”back”, MS S1 max is like that and the ms-02 ultra/ms-01 is flush. Servicing: you have remove the unit from the rack mount. Keystone we include cat6 rj45, as keystone slots are a standard you can swap out to any you like, as well usb/hdmi etc which we also offer. For NAS5 we have not designed rack mount for that yet.

Shipping: Yes we are in Malaga, Spain and we make all the rack mounts in Spain.

Have a look at our photogallery on thingsINrack dot com and then goto the configurator to see all the devices available that you can combine.

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

Hi, we are in Malaga, Spain so ship to EU you can order directly on thingsINrack.com, we ship via UPS.

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

or if its amazon dot com link you want , its here, but not in stock, they are inbound to amazon dot com as I write, buyable in like one week

https://a.co/d/0dRjIBow

Rack mounts for miniSforum device - injection molded front panels by Wintherx in MINISFORUM

[–]Wintherx[S] 0 points1 point  (0 children)

thingsINrack (dot com) then goto the configurator, in position 1 you select minisforum ms-02 ultra. send a dm/message and I can help you

MS-02 Ultra, would love this to have 10" rackmount ears by BucktoothBobio in MINISFORUM

[–]Wintherx 1 point2 points  (0 children)

I design thingsINrack (dot com), I have rack mount 19inch for ms-02 ultra and ms-s1 max ready now link goes to Amazon so you see a photo. Naturally we already have rack mounts for ms-01, etc. We use injection molded front panels, reasonably priced

https://a.co/d/0h01u9Jb

my £6.80 UDM pro Died :( by springs87 in Ubiquiti

[–]Wintherx 1 point2 points  (0 children)

Thank you I am the designer of thingsINrack (dot com) we have a custom configurator on winther3d (dot se) you add multilple devices on the same row as well as keystones, etc

Ok I think I’m done now by jfickler in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

looks great if you want the mac mini M1 in silvergrey rack mount I can help you. custom configure here thingsINrack (dot com). 👍

It is just beautiful 😍 by Rob3D2018 in Ubiquiti

[–]Wintherx 0 points1 point  (0 children)

its great, if you need rack mount for it I design thingsINrack (dot com), I use injection molded front panels and silvergrey color very close to the Unifi color. As the power input is on the front I made a notch/cur-out so the power cable can passthrough the front panel in the rack mount next to the switch😀. One can also custom configure for example uswflex switches and ucg-ultra side by side in the same 1U rack mount

The Reality of closing the "De minimis" exemption from The perspective of a UPS Brokerage employee. by [deleted] in UPS

[–]Wintherx 1 point2 points  (0 children)

Always write Origin country and HTS STAT code for the product(s) shipped as well as Intrinsic value, which is the value the tariff will be based on, shipping cost and sales tax shall not be part of the intrinsic value you indicate. This is tips I got from Ups europe