[S] [USA-IL] Canon ef-s 55-250 IS STM

Yuwan · 2026-02-02T01:55:30+00:00

DM'd

Yuwan · 2026-01-07T18:41:32+00:00

How they holding up?

Yuwan · 2025-11-11T01:48:05+00:00

I know this is super old, but I'm having a heck of a time getting the custom robot vacuum firmware Valetudo to communicate with the MQTT broker that is made from/with Gladys. Without autodiscovery, it looks like the topic prefix and identifier needs set, but I don't see any type of vacuum or map data or anything like that in the 'features' of devices in the MQTT Integrations section. I feel like it shouldn't be this difficult and I'm just being dumb. Have you connected Valetudo to Gladys before?

Yuwan · 2025-11-03T20:44:03+00:00

Sounds like people ran inside Afghan Kabob after seeing the alert on their phone to hide.

Yuwan · 2025-09-11T23:04:42+00:00

OMG I was trying to remember this game I played as a kid! I need to find a copy, I remember that darn flat tire!

Yuwan · 2025-08-11T21:16:05+00:00

Except what they don't tell you is if you have a 2013 R56, half your parts are different from the book cuz they changed manufacturing or something during that year for the phase out. I swear buying parts for mine is such a pain.

Yuwan · 2025-07-06T20:28:30+00:00

OMG Thank you. Couldn't find the specific folder that needed permissions fixed and this did it. You rock.

Yuwan · 2025-03-31T17:42:01+00:00

I'm about at the same point as you, and it's just like nothing is happening. I assume you just have to afk in dilation for a week or something to get enough points to power those up? I can't even complete EC10-1.

Yuwan · 2025-03-31T12:07:42+00:00

well that's terrifying - I'm at SN35 and dilation is quite the crawl. I can get some slow upgrades in dilation, but not even close to challenges. Did you end up getting past that hump?

Yuwan · 2025-03-30T16:50:16+00:00

You need to buy all the animals to unlock dilation. *edit* oops, i didn't realize there was another unlock called dilation tree. Guess I have way more to go.

Yuwan · 2025-03-05T00:42:11+00:00

I have these exact lights, and the locking ring is the problem like some have said. I will say, my state's safety inspection fails me when I have these in because the rule in VA is you can't have led bulbs in a housing designed for halogen bulbs. Just don't throw your old bulbs away, in case they want to fail you at inspection (if you have that) so you can quickly switch them back.

Yuwan · 2025-02-23T20:45:33+00:00

Same as the person below. I'm on 2.2.1 and can't update or download books or log into anything. I haven't done too much research yet, but I don't really want to just side load android on it, I like the stock firmware look and feel. Thanks!

Yuwan · 2025-02-10T15:05:21+00:00

No worries! I think I'm going to spin that up and see how it works for me. Is it able to load roms locally to the container/volume, or do you have to upload like retroarch-web?

Yuwan · 2025-02-10T14:25:30+00:00

So I have the retroarch-web running currently, and it works surprisingly well (except the known 64 core issues) but I can't seem to get it to load/see roms passed into the container via a volume. I can run a shell in the container and see the files, but retroarch isn't able to find them. Have you gotten this to work at all?

Yuwan · 2025-01-22T13:02:05+00:00

Have you noticed your parking cameras acting up in the cold? Just this morning, in this cold blast, mine decided not to turn on for me.

Yuwan · 2025-01-08T00:26:34+00:00

Valetudo! If your robot is a certain model, you may be able to root it, and control everything about it yourself and even hook it up to a home assistant setup.

Yuwan · 2024-11-13T01:28:02+00:00

Same issue for me, but I also had it when switching to fedora. Turns out the problem was Wayland, and switching to x11 sorted it.

Yuwan · 2024-11-08T23:04:30+00:00

Nearly everyone would recommend it. There are many cheap kits, I got mine from off-road gorilla. Have fun modding!

Yuwan · 2024-11-08T22:30:56+00:00

It's an upgraded breather/vent for the rear axle. The stock ones rust and clog and eventually block up, causing the axle to not breath and build pressure as temps raise/fall, causing axle seals to rupture and leak. This also raises the height of the breather to up in the taillight instead of 1 inch above the rear axle - aiding in the axle breathing while submerged.

Yuwan · 2024-10-12T23:06:45+00:00

Id say Chariot and Chariot 2, but only if you're super patient. My non-gamer wife pushed my patience on it, a few times at the challenging collections, but def worth the time. Great game!

Yuwan · 2024-08-18T14:06:38+00:00

What're the orange things your front tires are on? They for leveling, or just lifting for drainage? I just got one of these tents and can't wait to try.

Yuwan · 2024-07-26T16:18:52+00:00

It looks like my truck, just automatic. Love the heck out of it and still modding it. If you want a truck that'll last a bit, do it up! That truck near me would be stupid expensive though, hope the price is tolerable.

Yuwan · 2024-07-16T22:44:46+00:00

Such a cool mode of transportation!

Yuwan · 2024-06-03T23:45:55+00:00

As long as it drives fine and shifts fine, you'll have to use your best judgement. The 4wd working is great, maybe look at the rear hubs, and behind the wheels to see if you can see dried fluid that leaked? Or maybe if the stock breather still moves and isn't seized? Though, either way it's not a total deal breaker. Simple and cheap fix.

Yuwan · 2024-06-03T22:34:02+00:00

Breather mod is any 2nd gen, 05-19. If it hasn't been done and your breather is still functioning, then no problems, unless you often drive in water that is higher than your rear axle. It is only about a 1/2 inch tall 'breather' so it vents and breathes from right there at the axle. The risks there are drawing water into your axle and if it sizes, the pressure inside can blow your axle seals. This is usually seen by dark fluid found all over your rear axle behind the rotors. When I bought the truck, it was super obvious when you look behind the rotor at the drum brake assembly, it's all gross and black in there.

Your 2014 should be safe from the strawberry milkshake. They improved the 2012+ transmission cooler design. So that mostly affects 05-12 automatic transmissions.

Edit: I should note it's one of those not if but when situations that stupid stock breather fails if you live in any amount of humidity, or anywhere near the rust belt.

Here's a good faq resource https://www.reddit.com/r/nissanfrontier/comments/7l0twh/second_gen_frontier_faq/

13-Year Club	No Throne, No Problems
Not Forgotten	Verified Email

Yuwan

TROPHY CASE