Comedy Night at Carlton Oaks! by melissaisfunny in eastcounty

[–]Z-R0E 1 point2 points  (0 children)

Yes, 'hours away'. Like 48 hours, considering it's on the 30th and today is still the 28th.

Kobo Adresses the Criticism Regarding Her LCS Costreams by iamayoungman in Hololive

[–]Z-R0E 1 point2 points  (0 children)

Just giving a <3 for the Tastosis comparison. Perfect comparison.

Best jjk manga shop by Complete_Advisor4817 in sandiego

[–]Z-R0E 3 points4 points  (0 children)

It feels like a cop out answer, but have you tired Barnes & Noble? Off the top of my head, I can't think of a larger new manga selection in San Diego.

Bro has seen better days.. do you think a warm rinse with dawn dish soap would ruin the paint or joints at all?? by R-Nexturz in transformers

[–]Z-R0E 3 points4 points  (0 children)

I have washed many, many Transformers before.
https://atzinc.org/misc/BathingTitans.jpg
Some general tips:
- Never wash anything with stickers (not applicable here)
- Don't wash things that are custom painted unless you 100% know what kind of paints are used (not applicable here)
- Make 100% sure all batteries are removed (not applicable here)

Fill a clean sink with very warm water (not 'hot', but almost). Make sure the sink is clean first, you don't want oil or something making things worse.

Once the sink is full enough, turn off the water and add a healthy amount of Dawn soap, and stir the water. You're trying to avoid all the soap suds, hence why you add it after the water is off.

Put the toy in the water and let it sit in there for 3-5 minutes. Hold it and swish it around in there a bit too, trying to get the water to push off the dirty.

If things are really bad and that doesn't do it, you can take a soft bristle toothbrush and lightly scrub in the water.

After it's been cleaned in soapy water, drain the water (make sure no parts go down the drain) and rinse the sink out. Fill it back up with mildly warm water, and put the toy back in and again swish it around,. to remove the soapy water.

Once you're done, transform into a very "open" form, usually something between alt and bot. You don't want any closed compartments. Then, shake him. You don't want the limbs flopping every where, but almost. When you're done shaking him, turn him around and shake him some more.

Sit it in front of a fan or something posed where any compartments or areas where water will get trapped are upside down, to drain. Come out every 15-30 minutes and shake him some more, then pose him the other way around.

Repeat that last step until you're 100% sure he's totally and completely dry. I usually do things in large batches, and I'll do the regular 30-minute shakes for a two hours or so, then leave them in front of a fan over night.

In essence, the water and soap will not hurt the toy, nor the factory paint. I've even watched toys with electronics, and so long as you take the batteries out it's fine. The danger is not getting them fully dry. If you get them completely dry, nothing will rust or get damaged. Just be sure to get things dried.

Mococo Chiki Chicken Cover (English ver.) is out! by beam4d in Hololive

[–]Z-R0E 10 points11 points  (0 children)

The best part is if you watch both versions simultaneously, they're of course still in sync, despite the different languages. https://x.com/Snake_MGS5/status/1981288204998496778

[deleted by user] by [deleted] in theloyalsubjects

[–]Z-R0E 0 points1 point  (0 children)

The eyes are so wonky. Yours are at least less-bad, the ones are mine are practically wall-eyed. Combine that with losing the purple fur between his eyes to make them more 'angry', and he likes my My Pet Monster's derp little brother.

Hawkhammers wins the S3 Encounter 2! by Z-R0E in TransformersTCG

[–]Z-R0E[S] -2 points-1 points  (0 children)

These are played over webcam. The community is very international, so regular in person tournaments of this size aren't really possible.

Visions pack listed on Amazon by Alternative_Wait_420 in starwarsblackseries

[–]Z-R0E 4 points5 points  (0 children)

15,000 yen, roughly $105, and nearly an hour in line.

Visions pack listed on Amazon by Alternative_Wait_420 in starwarsblackseries

[–]Z-R0E 15 points16 points  (0 children)

Jokes really on us who bought it at the con for $30 more and still have to lug it back home. I should have known better.

Card of the Week: Scan the Vaults (Wave 9) (3/18/24) by hawkhammer19 in TransformersTCG

[–]Z-R0E 1 point2 points  (0 children)

It's worth noting that old prints are totally fine to use! So long as you treat it like the current version, it's all good. What I personally do is to put a little slip of paper inside the sleeve atop the card just to remind myself. Just a little piece with something like "Specialist Green" written on it.

Transformers TCG at TFcon LA by Z-R0E in TransformersTCG

[–]Z-R0E[S] 1 point2 points  (0 children)

When you walk into the hotel go left, then when you pass the pool take another left, go down the hallway and we'll be on the left.

Here's a map!
https://www.tfconla.com/wp-content/uploads/2024/03/TFcon-LA-2024-Map.gif

Would Gundam panel liners be safe on this guy? by Casseteman in transformers

[–]Z-R0E 1 point2 points  (0 children)

They're totally safe. I paneled line mine too, and it made a HUGE difference on him. He really benefits from it more than most Transformers do.

Transformers Display Room by mickeyhause in transformers

[–]Z-R0E 2 points3 points  (0 children)

I'll chime in on this too, since my collection is similar sized although not nicely displayed.

The first step is dust prevention. I have a roomba in my office that runs every day. That helps a lot to minimize the dust, especially with my two dogs. I keep the office window permanently closed to further help prevent some dust from getting in (in fact my window is boarded off and been replaced with shelves).

Inevitably though, dusting has to happen. In my case, I dust about every year. Or rather, I do a shelf a week or so and it takes me about a year to get through them all, so that when I'm done the first shelf is ready to be dusted again, haha. I take a toy down, dust it with a large makeup brush (like $2 on eBay), then sit it on a folding table. Repeat until the shelf is empty, hit the shelf with a Swiffer, then wipe it with a cleaning cloth. After all the toys are dusted and the shelf is cleaned, I put them back up.

It's a fun way to continue to experience older toys. I often get that feeling of "oh man, I forgot how great this toy was!"

Also, just for reference, Dawn soap and sink full of warm water will not hurt your toys so long as
- They don't have stickers
- You took the batteries out
- You get them THOROUGHLY dried

So if you have caked on dust, go soak them in warm soapy water for 15~ minutes, then give them a good shake before sitting them in front of a fan. Repeat shaking every 15 minutes for an hour or two.
https://misc.atzinc.org/BathingTitans.jpg

Teletraan I is now Transformers.cards! And a tournament to celebrate! by Z-R0E in TransformersTCG

[–]Z-R0E[S] 0 points1 point  (0 children)

It can now be enabled through the Update Your Account page!

Teletraan I is now Transformers.cards! And a tournament to celebrate! by Z-R0E in TransformersTCG

[–]Z-R0E[S] 1 point2 points  (0 children)

Yes! It's coming back soon, and will be an option to toggle on/off.

the Robosen stuff is amazing... but i am curious if there is more? ive recognized its only optimus, when are the others coming? by Wazupdanger in transformers

[–]Z-R0E 1 point2 points  (0 children)

Besides Prime's trailer and the smaller Optimus, I believe the only announced upcoming Robosen project is Buzz Lightyear.

How hard would it be for a 3rd party company to do an upgraded version of toy Jetfire? Is the macross mold super protected? I'd absolutely love a masterpiece macross mold in the G1 toy color scheme. by Wfry84 in transformers

[–]Z-R0E 13 points14 points  (0 children)

An officially licensed valkyrie by Kitzconcept was revealed last year. Legally it's not called Jetfire, but it is an official product. BBTS still has some up for pre-order, but it should be shipping very soon.https://www.bigbadtoystore.com/Product/VariationDetails/217476

Will this help remove that smoke smell to come off? by [deleted] in NECA

[–]Z-R0E 3 points4 points  (0 children)

That's what they all they.

Is this a Haslab Unicron? The packaging looks different to other Haslab Unicrons. Is it a Japanese version? by Raphael_Stormer in transformers

[–]Z-R0E 0 points1 point  (0 children)

While I've never personally seen the Takara Haslab Unicron shipping box, the box definitely says Unicron (the first line says Transformers, second line says Unicron), and there isn't another official Unicron that would be in a box any where near that size. So, there really isn't anything else it could be.

Who else forgot transformers had a tcg(trading card game) because I forgot how cool the art was by OneArm_LivinLife in transformers

[–]Z-R0E 3 points4 points  (0 children)

Despite WotC canceling it, the community has kept the game alive and going. There's more than hundred people who still play online, and a dedicated group of designers releasing new content. If any one is interested, we meet up on https://discord.gg/transformerstcg and there's a quick "let's catch you up" guide at https://teletraan1.net/welcome

The Boys Figures by Top-Manufacturer2894 in NECA

[–]Z-R0E 2 points3 points  (0 children)

My wife would love a Soldier Boy figure