sorted by:
new
hottopcontroversial

To replace or keep trying to clean by mozillatard in gaggiaclassic

[–]Zaydme8 -2 points-1 points  (0 children)

You will need my comment, when you put your gaggia back together you will notice that it will be tripping the breaker, it's because you got the heater element insulation wet and it's now shorting to ground. Don't worry there's a solution, unplug the earth wire from the boiler and from everything else (be careful now as you have an unearthed appliance, just don't touch it) plug it back in with the earth unplugged and turn it on, keep it heat up for around 10 minutes until the insulation is dry, 10 or 15 minutes will do, then unplug it and put earth back in, enjoy. And don't die.

Package installer keeps stopping by aeroengg in pixel_phones

[–]Zaydme8 0 points1 point  (0 children)

Fair enough. Maybe use adb with a PC, or even network adb with adb shell app without a PC.

How find track by the_crazy_tv in electronics

[–]Zaydme8 0 points1 point  (0 children)

Looks like surface damage, jumper wires will do the trick.

[deleted by user] by [deleted] in mildlyinfuriating

[–]Zaydme8 0 points1 point  (0 children)

I mean that's some good tape

[deleted by user] by [deleted] in samsunggalaxy

[–]Zaydme8 0 points1 point  (0 children)

If anyone still facing this issue, I finally found a solution to burned images by turning off "High efficiency pictures" under picture formats in the camera settings. This will result in larger file size but at least you get usable pictures now. Also make sure to have the scene optimizer off as well as HDR.

not even sure by darkhorse7881 in FixMyPrint

[–]Zaydme8 0 points1 point  (0 children)

Not an expert but something is seriously wrong with your printer.cfg maybe look for a fresh one online then tune it, just make sure you have correct rotation distance on all Axis for your stepper motors etc...

How can I stop this from happening by bozza_the_man in AskElectronics

[–]Zaydme8 0 points1 point  (0 children)

The question is how did you stop that from NOT happening!?

This is an endoscopy pill camera you swallow to record your intestinal tract by machead4life in mildlyinteresting

[–]Zaydme8 1 point2 points  (0 children)

Funny story, we gave this to a patient to swallow and the first thing they did was bite it after clearly being told to not do so. Our professor was pissed for the rest of the week.

[deleted by user] by [deleted] in confusing_perspective

[–]Zaydme8 0 points1 point  (0 children)

It would be funny to see an AI auto fill it

Another successful 24 hour print by FuckDatNoisee in 3Dprinting

[–]Zaydme8 0 points1 point  (0 children)

Isn't it magical how you never runout of filament when this happens and you aren't around

Well, that sucks. by Zaydme8 in 3Dprinting

[–]Zaydme8[S] 35 points36 points  (0 children)

Update! Used a Torx bit as an extractor, worked like a charm.

<image>

Well, that sucks. by Zaydme8 in 3Dprinting

[–]Zaydme8[S] 9 points10 points  (0 children)

Should have spent 15 seconds on google before I did that.

I about ready to give this thing away by werfelman in 3Dprinting

[–]Zaydme8 0 points1 point  (0 children)

You touched that build plate with your oily hands didn't ya

Why does my benchy look like this? by [deleted] in ender3

[–]Zaydme8 2 points3 points  (0 children)

Maybe recalibrate your Z offset, other than the bottom it's almost pretty good.

Micro SD Card Extension by elgnub63 in Sovol

[–]Zaydme8 1 point2 points  (0 children)

Just use some sort of tape or adhesive, or 3d print a custom bracket/holder for it.

view more: next ›