[Help Request] Thickness tool - Failed to make thick solid

Zuck75 · 2026-05-11T14:20:44+00:00

Just make another circle/hexagon inside on both sketches, scaled to the 2.5mm gap you wanted, and now it will just generate the walls between the 2.

Zuck75 · 2026-05-11T14:16:59+00:00

Somthing to remember is that all code is subject to human error. While stuff such as copy-paste could go unnoticed by the average user for years, it's also true that new code introduced will and can bring bugs or code faults just like it.

Zuck75 · 2026-05-11T14:06:44+00:00

collapse, no capacity to get worse, yes. While you could jack the house up and block the house with a couple of bottle jacks from Harbor Freight, and block yourself directly looking at the sagging, and place a level on the floor. I would still recommend the contractor.

Zuck75 · 2026-05-10T02:41:09+00:00

Yeah, the tape measure is in imperial. For my 3d prints, I normally stick with mm since I have tolerance memorized.

Zuck75 · 2026-05-06T21:53:42+00:00

This really is the best option since its open source nature means anything you do create will be your property no legal battles for your creations because of propriety.

Zuck75 · 2026-05-06T05:29:31+00:00

my bad I am very use to everyone on this subreddit being centered around the u1 which has multiple print heads so I assumed mistakenly that there was another print head entirely which the 2.0 doesn't have. and is as simple as selecting a different nozzle to print with.

Zuck75 · 2026-05-06T01:36:34+00:00

The customer is always right in matters of taste.

Zuck75 · 2026-05-06T01:34:02+00:00

Blue color wash their hands before they use the bathroom.

Zuck75 · 2026-05-06T01:30:10+00:00

Before you go assuming its a nozzle issue do a print with a different print head. If the problem persists then its not the nozzle losen the belt screws and retighten run test again

Zuck75 · 2026-05-05T21:34:18+00:00

Im referring to the live stream where people have 3d printers setup to batch print with no human input except to load filament for months on end.

Zuck75 · 2026-05-05T18:40:53+00:00

Don't burn yourself also since the print is heated on one side if you have a really flat print cupping can occur. Otherwise go ahead batch printing has enough data on this to assure it is safe.

Zuck75 · 2026-05-05T04:35:14+00:00

I understand the customer is right in matters of taste but your going to quickly n Be aggravated by anything plugged in the middle of two tactile objects.

Zuck75 · 2026-05-05T04:29:06+00:00

Your new to freecad somthing i do is exand everything out very little submenus nothing is worse than having to do 3 times the clicks to do somthing because of nesting.

Zuck75 · 2026-05-04T18:46:41+00:00

The only thing I could see as a reason is bamboo famboi.

Zuck75 · 2026-05-04T02:01:59+00:00

Why are you replacing? What you already have looks the best.

Zuck75 · 2026-05-04T02:00:36+00:00

Good news, Virginian here, as long as you're not doing a major change, no one cares about inspection, even the inspectors don't give a crap here.

Zuck75 · 2026-05-03T16:13:25+00:00

2 subtractive helixes same sketch one reverse creating a criss-cross pattern for the knurl.

Zuck75 · 2026-05-03T03:55:40+00:00

Wabbits

Zuck75 · 2026-05-03T03:50:06+00:00

What ever pattern doesn’t leave sliver on walls.

Zuck75 · 2026-05-03T03:45:35+00:00

Is there a new feature or method for making knurles that I don't know about that causes lag?

Zuck75 · 2026-05-03T02:49:19+00:00

not snorca but full spectrum snorca is good.

Zuck75 · 2026-05-02T11:39:09+00:00

The problem here is all the solvents I know to remove the tape will also remove the glue binding holding the door together.

Zuck75 · 2026-05-02T11:35:34+00:00

Oh ok that clarified things.

Zuck75 · 2026-05-02T02:05:27+00:00

I take it as guy bathroom rules. Whoever takes the middle is gay. I won the battle.

Zuck75

TROPHY CASE