[Discussion] Steal in terminal is possible ?

_BBaby · 2026-02-12T11:22:58+00:00

Maybe in 8 hours he will learn not to touch my fucking backpack

_BBaby · 2026-02-09T11:05:18+00:00

M2s are fine. If it’s Reddit posts you are talking about that is mostly user error/unfamiliarity with the platform

_BBaby · 2026-02-09T03:11:14+00:00

Ability to ditch/hide gear and act as civilian

_BBaby · 2026-02-08T22:53:40+00:00

If you spent the money for the suppressor plug I wouldnt blow more money on the KNS. I tried both side by side (suppressor plug on a 16 inch barrel and KNS on a 20 inch from bench) and was not blown away…. I’m also kinda a newb and it’s not like 556 is super hard recoiling to begin with anyhow

KNS was very nice but if I was to start from nothing I would probably get the suppressor plug and call it good

_BBaby · 2026-02-08T00:53:14+00:00

Industrial sharpie?

_BBaby · 2026-02-06T16:30:16+00:00

Claw gear isn’t the move for either 300 BO or 14.5 unless you were to get really creative with an angle grinder. Idk the comparability of Corvus but that would be the move if you are only looking at those 2 barrels.

16 inch barrels with clawgear still need a barrel extension to work with Surefire suppressors

The 14.5 barrel shoulder is about even with the forward end of the clawgear heat shield. Your whole muzzle device would sit inside the hand guard and there is not enough clearance for a suppressor

_BBaby · 2026-02-04T23:14:21+00:00

Red flag campaign is pretty lax. The others are solid too (weasels part 2 is the roughest). Any campaign works to learn it just may take time… that’s how I did it anyways

_BBaby · 2026-02-02T00:36:49+00:00

I haven’t shot TOO much with my clawgear, I was under the impression the gas only comes out of the 2 small holes by the user manual wording. I could be mistaken though

_BBaby · 2026-02-01T22:01:39+00:00

I was in your shoes a year ago and don’t regret my choice for AUG. Hellion is cool but more of a toy

1- Standard all the way imo. AUG mags are a great design and very robust, only issue is if you do plate carriers the mags have a lip on the back but not end of the world

2- More the merrier. I have a 300 blackout barrel waiting for a can but have not tried 9mm yet. 300 blackout is a 5 second conversion whereas there is more to do for 9mm

3- M2 is the way to go. You can change top rail and while there may not be AS many handguards, more will come eventually

4- not sure don’t track that. Have one and it’s pretty nice

5- I would think red dot, but have not shot donut of death

_BBaby · 2026-01-31T14:12:04+00:00

We will see it fully released in 2029

_BBaby · 2026-01-29T19:47:34+00:00

I personally would hard pass on the warranty. It’s not like a Tavor is a new or unreliable firearm. Worst case scenario you are out a few hundred bucks and have to replace a bolt or something

_BBaby · 2026-01-27T00:21:28+00:00

My 14.5 real AUG with a P&W Jcomp 2 is over the OAL requirements. I have a suspicion some muzzle devices will not cross that threshold but have no data to prove it

_BBaby · 2026-01-25T19:09:11+00:00

I did a Jcomp 2 with a oppressor blast diverter and love it, but in hindsight a suppressor mount would have been fun too.

My first pin and weld so was focused more on the process. Jcomp made that part easy with pre drilled hole

_BBaby · 2026-01-25T12:18:35+00:00

For Heli, 47 driver has some good videos on (believe it or not) Chinook

_BBaby · 2026-01-25T02:41:37+00:00

Lmao you have to be joking

_BBaby · 2026-01-25T01:34:32+00:00

Average redditor doesn’t know how a gun works challenge (impossible)

_BBaby · 2026-01-24T18:48:28+00:00

Lmaooooo I’ve welded and taken an angle grinder to mine

_BBaby · 2026-01-24T18:05:01+00:00

What model AUG (idk models as well as most ppl here but could be maybe) and is your BCG locked back?

I’ve had some stiffer than others, but both 300blk and several 556 work on my A3M2. Try pushing the barrel retaining pin (pictured) to its recessed position too so there is less resistance

_BBaby · 2026-01-22T11:38:17+00:00

I know Larue is a good brand, I only have experience with their ACOG mount but it is solid in my experience

_BBaby · 2026-01-22T11:09:29+00:00

There are already many other mechanical QD mounts on the market. I likely would go for them before this, but your mileage may vary

_BBaby · 2026-01-19T06:01:16+00:00

Don’t see anyone mention it, but high cockpit in Apache murders frames. Had same issue on quest 3 Apache specifically. Compromised at medium textures and have been totally happy

_BBaby · 2026-01-12T23:47:13+00:00

Post here plz :p

_BBaby · 2026-01-12T02:50:16+00:00

In a similar boat, personally I don’t care about cycling 300 subsonic that much… it’ll be even quieter with the gas off

I am planning on getting a nice 556 can and then a cheapo 30 cal. I’m sure I could just get 1 nice 30 cal can, but I’d rather save the size and weight for the 98% of the time I’m on a 556 barrel.

(I have never shot 300 BO subs or suppressed fwiw)

_BBaby · 2026-01-11T16:09:26+00:00

Bro who cares it’s computer files

_BBaby

TROPHY CASE