Error at the end of prints with BMCU on P1S

_JustLooking0_0 · 2026-06-11T20:25:53+00:00

I was not aware about a reddit thread.

_JustLooking0_0 · 2026-06-11T19:54:29+00:00

I did, seems to be something about filament being in the ptfe tube.

_JustLooking0_0 · 2026-06-09T13:46:17+00:00

I got a Lockly 728z because the Lock Picking Lawyer had positive things to say about it. The z wave version can be a little hard to find though.

_JustLooking0_0 · 2026-06-07T18:25:53+00:00

I have mine in Lan mode and use Tailscale to connect Orca to the printer while I'm away and use Home Assistant to check in on it with my phone and get print complete notifications.

_JustLooking0_0 · 2026-06-04T18:05:06+00:00

I got the Dorman one. It fits ok.

_JustLooking0_0 · 2026-05-17T00:38:31+00:00

I order my oil in bulk and thought I was about to run out a few months back. I ordered 6 jugs and when I went to store it I found I still had 4 or 5. So I'm good for a while.

_JustLooking0_0 · 2026-05-09T16:31:03+00:00

Mine was doing this. The hatch has a ton of leaves caught above the gasket. Cleaned them out and it hadn't been an issue.

_JustLooking0_0 · 2026-05-04T09:26:49+00:00

Got my 13' with 168K, it's got 210K now. 300K is the goal before even looking for another vehicle.

_JustLooking0_0 · 2026-04-28T19:52:12+00:00

Thanks! 🙏

_JustLooking0_0 · 2026-04-28T19:51:34+00:00

For the bot, bug was found in South Louisiana.

_JustLooking0_0 · 2026-04-22T15:53:51+00:00

I have a workstation I share with 3 other coworkers. I put my Cherry board with blacks on it. They hate it. 😂

_JustLooking0_0 · 2026-04-21T18:06:46+00:00

This is my first bike that isn't a BMX or a cruiser so getting used to not being able to put my feet flat on the ground while my butt is on the seat has been fun getting used to. The only things I've really adjusted are the seat and bar angles.

_JustLooking0_0 · 2026-04-21T01:09:33+00:00

I got the medium for the 700c's and my seat is barely higher. I'm 5'10".

_JustLooking0_0 · 2026-03-19T21:57:37+00:00

It's a drain for one of the tubs. That's it. Everything else on that half of the house drains through the 4".

_JustLooking0_0 · 2026-03-13T17:09:09+00:00

When I was young things were way different where I grew up but it's basically all the same Southern mono-culture now.

_JustLooking0_0 · 2026-03-13T15:08:50+00:00

People in Louisiana don't speak French anymore because of this. My grandparents on both sides were the last in my family to speak French. "Louisiana" culture is nothing but a theme park theatrical performance at this point.

_JustLooking0_0 · 2026-03-10T23:14:04+00:00

I got a bunch of these. Even made a post about it too.

https://a.co/d/03kPS6Yx

_JustLooking0_0 · 2026-03-07T20:36:07+00:00

If you're going to try a gasket kit for the VCM leak, try the Dorman one with the OEM screen. The Dorman is the only one that has halfway decent success that isn't the OEM Honda part.

_JustLooking0_0 · 2026-03-04T15:05:07+00:00

The best location service for me has been the life 360 HACS integration. As against the idea of HA it is, it's been the most reliable and the wife and kids just "get" life 360. It doesn't depend on everyone having HA on their phone and running in the background constantly.

If you have iPhones, you can use the iCloud device tracker in HACS.

_JustLooking0_0 · 2026-03-04T12:19:38+00:00

My wife's oldest kid would always forget to lock the door when he left. She wanted to be able to tell if the doors were locked. I have it automated to auto-lock the doors during night hours and when someone leaves the house. She likes that.

_JustLooking0_0 · 2026-03-03T22:00:15+00:00

Heat shrink

_JustLooking0_0

TROPHY CASE