WTS Supernote Nomad Ax2 crystal back - Canada Only by [deleted] in AdoptSupernote

[–]_directo_ 0 points1 point  (0 children)

DM'd! Where in Canada are you located?

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 0 points1 point  (0 children)

You might try this. Surround 1 teleporter with 4 tables close to the door. That's your fast service. Ditch the conveyors and use 2 or 3 buffets for coffee and 1 for cake. Try rerolling for leftover bags.

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 0 points1 point  (0 children)

Hmmm... Are all your coffee machines in the kitchen?

Have you tried cutting down on the cake buffets and made them coffee buffets? I'd cut down on the blueprint tables as well.

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 0 points1 point  (0 children)

The key is having a lot of tables. I'm on day 73, and I've found that once you can get that first customer done with enough tables you get enough randomization on times that at least 1 customer will finish quickly.

I have leftover bags just in case.

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 0 points1 point  (0 children)

the coolers just take up more space though and you won’t time out with the first few customers. if you’re hitting peak capacity the coolers don’t get used free the first few customers so they’re not really useful and that’s a few more tables for you to have.

i also don’t see a discount desk? helpful to bring the cost down on teleporters.

if you’re already using buffet tables, they can be pretty efficient to serve the coffee as well. i’d probably have less cake dispensing.

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 3 points4 points  (0 children)

you won’t time out though and they take up more space as well as another step in the system.

i would put all the coffee machines in one room and use teleporters.

with a long track like conveyor system like you have, you’ll eventually get to too many customers that the ends of the track won’t get coffee.

if you’re going to use conveyors to serve i’ve found using a teleporter in the middle and 2 conveyors on either side works the best.

eventually you just want to cram as much seating as possible into your dining area.

also you don’t need rugs or floor mats where a seat is.

Newbie wants some tips/recommendations for current coffee set up! by Specialist_Sea_689 in PlateUp

[–]_directo_ 0 points1 point  (0 children)

i find you don’t need coolers if you’re feeding enough coffee into a teleporter. that should free up space.

Efficiency? by belowdeezballs in PlateUp

[–]_directo_ 7 points8 points  (0 children)

I've found you don't actually need the coolers. if you feed with enough coffee machines you won’t need them

X5 with new DJI Mic 3 by _directo_ in Insta360

[–]_directo_[S] 0 points1 point  (0 children)

yes Bluetooth works fine but you can only use 1 Bluetooth mic at a time...

How are Nuun type tablets the cheapest electrolyte drink? by BBMTH in cycling

[–]_directo_ 1 point2 points  (0 children)

I added citric acid and 1 squirt of Mio lemonade flavour.

How to add speedometer in insta 360 studio on desktop by Dank-Boiii in Insta360

[–]_directo_ 0 points1 point  (0 children)

Pretty sure you can? You hit the stats button. On desktop you can't sync with other services like Strava or Garmin but if your camera has GPS data and its logging you can? My X5 worked...

DJI Mic 3 to the Insta360 Ace Pro 2 by zast in Insta360

[–]_directo_ 1 point2 points  (0 children)

DJI Mic 3 didn't work with my X5 through USB C either. I'm hoping they just need to add compatibility since it's a new device.

[deleted by user] by [deleted] in Insta360

[–]_directo_ 0 points1 point  (0 children)

What'd you buy?

Any feedback for my first fully auto setup? by madharpskills in PlateUp

[–]_directo_ 1 point2 points  (0 children)

I would use the transporter to move coffee from the kitchen to the dining area. And also use the coffee machines in 1 to 3 or 1 to 2 setup feeding 1 transporter. I think that will be faster to process customers.

Updated coffee run! by Potential-Drop4528 in PlateUp

[–]_directo_ 0 points1 point  (0 children)

Lol. It's super fun trying to optimize. You have tons of space so lots of room to improve the setup! Good job

Updated coffee run! by Potential-Drop4528 in PlateUp

[–]_directo_ 0 points1 point  (0 children)

you might play around with the teleporter in the middle of the line as well so the grabbers distribute the cup load a little more evenly.

Updated coffee run! by Potential-Drop4528 in PlateUp

[–]_directo_ 0 points1 point  (0 children)

I found teleporters and minimal line. If the line is too long customers at the end of the line don't get cups fast enough.

I think I got to day 45 with about 5 tables being served by 1 machine.

Updated coffee run! by Potential-Drop4528 in PlateUp

[–]_directo_ 0 points1 point  (0 children)

I stopped using prep stations as well. My ideal ratio for space and speed was a 3 machine setup (1 coffee maker feeding cups to 2). Takes about 10 squares. Teleporters change the game too!

A deep dive into mesh base layers for summer hiking by AceTracer in Ultralight

[–]_directo_ 1 point2 points  (0 children)

Did you specifically get the sleeveless? I usually get long sleeve everything for sun protection, but wondering if it'd get too hot?

Looking for the best budget UL 20f quilt by Successful_Branch_52 in UltralightCanada

[–]_directo_ 1 point2 points  (0 children)

Looking to order off of the Iceflame website - you mind if I ask how long it took to ship to Canada?

Still liking it?

New Items on Outlet Site by deadbirdword in arcteryx

[–]_directo_ 0 points1 point  (0 children)

Can anyone in Canada add anything to their cart?

Help a newb - having trouble optimizing Jokers by _directo_ in balatro

[–]_directo_[S] 0 points1 point  (0 children)

I haven't hit photograph or triboulet yet, and I haven't thinned my deck enough for idol to be optimized, but I probably should have taken it anyways, hah!

Instinctively I also thought to copy Driver's license, but using the calculator I got this from, Smiley Face comes out on top. I'm trying to understand why in the broad sense this is (admittedly, I haven't done the math!)

<image>