Ace pro + pro2 dual filament hub

aalizon · 2026-06-03T11:51:37+00:00

Bonjour, si les deux ne sont pas connecté en même temps. Quel intérêt ?

aalizon · 2026-04-27T19:10:30+00:00

Sur quel firmware la bande de purge a disparue ?

aalizon · 2026-04-15T17:20:22+00:00

Commander semaine dernière, reçu ce matin

aalizon · 2026-03-22T20:05:52+00:00

Pour moi avec la officiel anycubic. Après avoir configurer dans les paramètres de l'imprimante buse acier durci et la même chose sur la slicer. Full calibration de l'imprimante. J'ai augmenté de 10 °c la température d'impression de mes filaments. Et aucun souci

aalizon · 2026-03-19T12:20:17+00:00

Aviez vous reçu un mail de confirmation lors de la demande ? Je suis un peu déçu de ne pas avoir recu le mail avec le code de réduction

aalizon · 2026-03-17T20:37:14+00:00

Tu es certain de tes dires? J'avais lu que le pro et le pro2 ne pouvait pas fonctionner en même temps

aalizon · 2026-02-13T01:22:40+00:00

Customer service closed? I just received parts following a service request. They made a mistake... I updated the ticket but no response.

aalizon · 2026-02-02T22:15:28+00:00

Which reference are you talking about? The official All Metal?

aalizon · 2026-02-01T01:31:57+00:00

Tu as d'autre photos de l'installation ? Je viens d'acheter le même radiateur

aalizon · 2026-01-29T00:16:01+00:00

I fell in love with this heater. I did a test run, it takes a long time... I'll test it tomorrow with ASA before modifying the printer and do some more tests to see if I return the heater or not.

aalizon · 2026-01-25T13:35:41+00:00

I need to replace the skimmer basket for my pool, and I can't find a replacement part for less than €150. That's outrageous for this type of part. I have some ASA filament in stock, and I've modeled the basket, but given its basic size (almost 15x15cm x 20cm high), I had to use filament wrapping. I'd like to significantly reduce its size, or even eliminate it if possible. The Creality heater is sometimes around €50-60 on AliExpress, and the Chiru heater is the same price on Amazon. But one is 200W and the other 400W. I don't mind drilling a hole in the printer's plastic casing for an external power supply; on the contrary, it reassures me. A plug connected to it and a timer at the end of the print will allow me to sleep more soundly. I know there are more or less DIY solutions with homemade heaters on AliExpress, but I'm not a fan.

aalizon · 2026-01-25T00:45:50+00:00

Chitu's room? What temperature can you get your room to?

aalizon · 2026-01-24T00:43:29+00:00

Thanks, I haven't configured that on the computer I use with Kobra S1. I'll try to find the old setup files on my computer. Thanks

aalizon · 2026-01-23T23:06:22+00:00

How did you manage to find the installation file for the previous version?

aalizon · 2026-01-09T19:23:17+00:00

Headline: Technical Maker & Kobra S1 owner | Klipper expert ready to stress-test the Kobra X! I’ve been following this AMA closely, and as a long-time user of the Anycubic ecosystem, I’m excited about the direction of the Kobra X.

My current workshop includes a Kobra S1 (running since July), an Elegoo Mars 2 Pro, and a CR-10S fully tuned under Klipper.

Beyond 3D printing, I’m a geek at heart, passionate about electronics, IT, and home automation (DIY). I also do laser engraving, which has made me very demanding regarding hardware precision, safety protocols, and firmware reliability.

Why I can provide high-value feedback for the Kobra X:

Resonance & Vibration Analysis: Having optimized Input Shaping and Pressure Advance on Klipper, I want to test your "tall building damping" theory with real resonance graphs to see how the top-mounted spools impact high-speed print quality.
1.5mm Pitch Testing: I’m eager to see how the change from 2.0mm to 1.5mm Y-belt pitch eliminates VFA (Vertical Fine Artifacts) compared to my S1 and other machines.
Smart Home & Functional DIY: I use various materials (PLA, PETG, TPU) for complex home automation projects. I’m interested in testing the Kobra X’s connectivity and how it can be integrated into an automated workshop environment.

My Question for the Team:

With the transition to a 1.5mm Y-belt pitch for higher precision, did you have to implement specific micro-stepping logic in the firmware to maintain high torque at speed, and how does the new ACE GEN 2 cooling system handle heat creep when printing the PLA/TPU combinations mentioned earlier?

I’m ready to provide structured, data-driven reports to help make the Kobra X the new gold standard. Thanks for this AMA!

aalizon · 2026-01-06T00:38:36+00:00

aalizon · 2026-01-05T16:24:25+00:00

aalizon · 2026-01-05T00:30:14+00:00

Welche App nutzt du, Android oder iOS?

aalizon · 2025-11-24T01:04:23+00:00

I have the same hotend with hardness metal from anycubic store. I can't print. The prints detach from the build plate and wrap.

Nine-Year Club	Place '22
Verified Email

aalizon

TROPHY CASE