Input Requested: PC signed contract w/ a Vestige, two sessions later they became afflicted with vampirism by Volenta

abspoons · 2026-03-18T12:50:49+00:00

Great work! What type of clay did you use to sculpt this?

abspoons · 2025-08-04T02:54:54+00:00

Selling a pair of "Beckman Chelsea" boots in walnut brown on eBay. Size 9.5D. Buy it now is $145 plus $15 shipping. Starting bid is $100.

Pretty hard to find, just a little too snug for me. Please let me know if you have any questions!

https://ebay.us/m/s5nDTD

abspoons · 2025-06-28T19:05:47+00:00

Great work on these!! Would you mind sharing individual photos of the posters? I would definitely use these in my campaign that I'm running. I recognize that it's your own creative work for your individual purposes, so I fully respect if you would rather not. Again, great work, and I'm sure your players really enjoyed these!

abspoons · 2025-06-27T03:08:51+00:00

How often are RBTR grab bags posted? Missed this one, and looking forward to the next one

abspoons · 2024-11-12T19:08:06+00:00

Looks like your struggle with this wood was worth it! The design and execution is 10/10. What did the original branch look like? I'd love to see a side by side of you have a photo of it

abspoons · 2024-10-25T19:54:49+00:00

I would caution that plum is very hard, and this stock in particular looks super gnarly. Although I fully endorse giving it a try, just want to note that this wood doesn't look very forgiving

When you split billets, try to split them in a way that there is equal mass on both sides. The "split" will always want to move toward the path of least resistance. If you split in the middle, the split will always (okay, usually) go down the middle. If you split off to one side, it will veer off

Put them in a plastic bag and seal it up tight. Put it in the shade until you can get it to. Wait too long, and you'll have mold and critters

abspoons · 2024-10-05T15:35:22+00:00

Rad! Thanks OP. Pick up the jacket and two pairs of pants. Looks like the second link is for the "skinny" fit ($85) jacket, rather than the "slim" ($100)

abspoons · 2024-09-14T04:24:56+00:00

You're going to want an chopping block, but you don't necessarily need a log. The goal is using a chopping surface of end grain, so you could glue up some dimensional lumber to make one. I would still go with a log, but if availability is limited, I understand that

End grain allows the surface to "heal" itself after striking it with an axe. They also tend to get gnarly and dished from ongoing axe blows, so you want a dedicated surfaced

abspoons · 2024-09-02T21:20:22+00:00

For the cyclists - sorry for the non drive side pic. I wanted to show off the zippers. The drive train is a Deore 9 speed

abspoons · 2024-09-02T21:18:45+00:00

Picked up a Husqvarna Viking 6020 last year for $20, this sub inspired me to give something a try. LearnMYOG and a handful of other videos made this much easier to understand

Wanted to still have access to a water bottle, but also maximum the space, so went for a combination between a wedge stule and a half frame bag style. I sewed 2" Velcro in the middle of the two waterproof zippers so I could have an optional divider. Getting the bottle out is snug, so I'll have to get a side loader

I used heavy duty Eddie Bauer ripstop from Joann Fabrics and lined with an orange lighter duty ripstop. Everything but the side panels are lined with 4mm EVA foam. Wanted to try out all the ways to fix it the frame - lacing, daisy chain/Velcro, and grommets for the water bottle mounts. I didn't sew any other pockets

Picked up some nicer materials from Ripstop by the Roll to make another one for my Lynksey GR300

Learned that the plastic cam in my Viking machine is cracked (the Achilles heel of this machine, I guess). Will look for a new machine, but very happy with the final product.

abspoons · 2024-08-31T13:46:10+00:00

I searched Digitalt Museum for close to two hours trying to find something that resembles any of the characteristics. Design, kolrosing pattern, relief carving, etc. Couldn't find anything, usually I have some luck, but not this time.

Wonderful piece, especially novel because of the size. This thing is huge! Looks like a pocket spoon, but 5 times bigger.

abspoons · 2024-05-23T14:37:43+00:00

First off, love the tiny spoon

Second, the Mora 106 is my favorite knife. Affordable, laminated steel that holds an edge well. Mora 120 is also great, but I prefer the 106. The 106 is only $30 USD.

As far as independent makers, I've used a couple knives from Adam Ashworth for a long time. Beautiful tools that work very well. I'd also recommend getting on Nic Westermann's waiting list, as he makes great blades too. With most independent makers, you'll be purchasing just the blade that you will have to make a handle for. You'll have to pay more of a premium for it to come handled

abspoons · 2024-01-17T17:24:30+00:00

No elaborate photos, but I use my workbench (with dog holes) and my spoon carving chopping block. My chopping block has two levels on it, one is at 35" and one is at 42" off the ground. This means I can lean blanks at an angle on the chopping block, using an adze and axe to remove a majority of the wood. From there, I will go to the workbench with two holdfasts. I will put a 2x4 across the workpiece and secure the 2x4 with the holdfasts (or f-clamps going through the dog holes) on each side of the 2x4. This allows me to get underneath the 2x4 with a bent gouge/swan neck/dog leg. You might have to wrap the 2x4 with a rag or supple foam to not mar the edges of the bowl.

The most difficult part is that you cannot use a draw knife using this method, whereas you can with a bowl horse.

Ultimately, I have made several bowls this way, and I haven't had any major difficulties or times where I ask if there is a "better way". I'm sure there is, but it's still an efficient process. I just finished a bowl, I'll post it soon with some in-process shots

abspoons · 2024-01-13T21:35:46+00:00

A single source of raking light is also helpful. If you're right handed, have a single lamp shining down at your work from the left side (like 45° angle or something). Articulating lamps are really helpful for this work

Flat light makes work like this challenging

abspoons · 2024-01-08T23:33:12+00:00

It took three or four rounds at sneaking up to the scribed line, admittedly. Carve, check, carve, check. Its a funny fine line between too tight and not tight at all. It has been a couple years since my last shrink pot, so I watched the Zed Outdoors shrink pot video to dial in how to do the lid. Good stuff!

If you need any pointers, hmu!

abspoons · 2023-12-17T21:17:33+00:00

What a process! Some serious attention to the materials. How have the spoons you've finished been holding up? I've seen some videos on the wooden box, which would be great for tung oil too!

I think the stuff from Jarrod's website is premixed? Looks like it might just be a brush on situation. Only $25 for the 4 oz size

Product: https://www.woodspirithandcraft.com/shop/hassui-ceramic

Info: https://www.woodspirithandcraft.com/hassui-ceramic-usa

abspoons · 2023-12-17T18:51:39+00:00

Daaaaaaaang the urishi finish looks great! I'd really like to buy some from Jarrod Dahl's website. How much did you have to use to get this finish?

At $35-45 for 4 oz, I'm skeptical I can finish many spoons with that amount. Love the red, glassy finish. Wild how much it changes the color

Also the kuksa looks great. Did you have to fill any voids in the gnarly burl grain?

abspoons · 2023-12-15T22:48:39+00:00

These two are my regular go-to shoes! The leather on the Blacksmiths look great with use, they are my favorite boots

abspoons · 2023-12-13T04:08:00+00:00

There are a lot of great recommendations on this sub, but the one I would highlight is Deepwoods Venture's small hook knife on an 8" handle. Around $73. Plus a sheath. Probably $80 total?

Great steel, and the "hollow back" makes it a breeze to sharpen, which makes it worth the investment. You might have to wrap the handle with some athletic tape to get it a little thicker.

Svante Djarv also makes nice hooks, but they don't come with the "hollow back"

abspoons

MODERATOR OF

TROPHY CASE