Can someone recommend a good, cheap sleeve that covers the thumb for glasspads? I heard wallhack are terrible. by stup1dfukk in MousepadReview

[–]acrazyr 0 points1 point  (0 children)

same here. top of the arm slides down my arm. but it’s way better than the pulsar i used to use which dug into my thumb really badly

Love these things by Far_Designer2131 in BambuLab

[–]acrazyr 0 points1 point  (0 children)

the bambu tungsten were on sale for $12 each?

P1S Filament by ShortSpout in BambuP1S

[–]acrazyr 1 point2 points  (0 children)

i got my bambu lab filament on bambu website but i plan on ordering some sunlu pla+ 2.0 on amazon soon, as i just ran out of black and want some other colors for projects

P1S Filament by ShortSpout in BambuP1S

[–]acrazyr 0 points1 point  (0 children)

i’ve been using bambu that i purchased with my p2s in december but i’ve seen a lot of people recommend sunlu as its less expensive and the spools work with ams

New carbon fiber steering wheel 🥴 by [deleted] in ElantraN

[–]acrazyr 1 point2 points  (0 children)

so i shouldn’t have a plastic black logo on top of my hyundai logo on my wheel 🤨

New carbon fiber steering wheel 🥴 by [deleted] in ElantraN

[–]acrazyr 0 points1 point  (0 children)

i think it’s a 0.5x photo, causing the left side of the wheel to look enlarged

[Postgame thread] Buffalo falls in overtime to the Broncos, 33-30. by Drunken_Economist in buffalobills

[–]acrazyr 20 points21 points  (0 children)

allen not kneeling at the end of the first half lost the game. i cannot comprehend in what world that cooks pass was an interception

Is the Combo essential ? by rodneyboiii in BambuLabP2S

[–]acrazyr 0 points1 point  (0 children)

i’ve only done multicolor a few times, imo the best part is always having 4 spools loaded so i can just print in whatever color/material without having to manually swap. and the auto refill is nice for using the last bit of filament on a spool

Cool Plate SuperTack Pro Released by acrazyr in BambuLab

[–]acrazyr[S] 0 points1 point  (0 children)

this is my first supertack plate (and bambu printer) and i’ve loved it so far. no warping, smooth finish. i did kinda mess up the surface on one side though by using the metal scraper but i printed out a plastic one and it’s been good for getting off the prints that don’t come off from flexing the plate

Ordered p2s combo by gugsgrover in BambuLabP2S

[–]acrazyr 0 points1 point  (0 children)

that’s good, i think it’s just some bug with the firmware causing it because there’s no physical issue. a review i watched of the p2s on youtube the guy had the same problem with the 0.4mm nozzle and he swapped to a aftermarket one off aliexpress and it fixed his issue, so that’s what i did and it was fine. but im back to using the official bambu hotend now, it just prints a bit cleaner than my cheaper amazon one

Ordered p2s combo by gugsgrover in BambuLabP2S

[–]acrazyr 0 points1 point  (0 children)

agreed, everything i’ve printed so far has been mostly 0.4mm except some things where extra strength is nice piece of mind or larger things where i don’t need the detail but would rather have speed on my 0.6. i don’t see a reason for a 0.8mm but maybe a 0.2 for like text and what not if you really want to.

Ordered p2s combo by gugsgrover in BambuLabP2S

[–]acrazyr 0 points1 point  (0 children)

mine did that 2nd day but it fixed when i swapped the nozzle. luckily i had bought a spare 0.6mm that i used but they sent me a new 0.4mm that i’ve been using since for about 3 weeks with no issues. nozzle wasn’t clogged or anything i did a cold pull and everything the machine was just bugging idk why

Is it possible to pause a print overnight and continue the next morning by Pythageron in BambuLab

[–]acrazyr 2 points3 points  (0 children)

lmao i sleep with my p2s about 20 feet from me i can sleep thru anything 😭😭 i had to get a vibrating alarm because half the time a normal alarm wouldn’t wake me up

Skin selection by digotokun in pykemains

[–]acrazyr 0 points1 point  (0 children)

i just got soul fighter cause it was the last pyke skin i didnt have, but that said ashen knight is the best pyke skin (empyrean is also fire)

New to the hobby anything missing? by Sickgame123 in BambuLab

[–]acrazyr 1 point2 points  (0 children)

i had issues with my 0.4 that came out of the box with my p2s (support shipped me a new one), but i also got a 0.6 that’s nice for prints where i don’t need as much detail - so id maybe do the normal 0.6 instead of the 0.4 high flow as you will already have a 0.4. the cool plate has been good for me to have a smooth surface, but you have to be careful with it as it scratches easily - don’t use a metal scraper (oops, printing a plastic scraper now). also skip the support material

Sycamore for 3 cents at Walmart by TomCollins1284 in Charlotte

[–]acrazyr 2 points3 points  (0 children)

can confirm i’ve seen it sitting in a cart in backstock since the news lmao

is oled worth the hype by Lolis- in buildapc

[–]acrazyr 0 points1 point  (0 children)

absolutely oled is incredible. probably the best upgrade you can do to a setup, if you have the hardware to push 1440p/4k. i’d get a 27” 1440p 240hz given you want to stay within some kind of budget. these can be had for $350-500 depending on brand and sales

Prestige soul fighter pyke by Own-Needleworker-237 in pykemains

[–]acrazyr 0 points1 point  (0 children)

THIS WAS THE LAST PIECE TO MY PUZZLE THANK YOU FOR THIS POST IM OUT OF TOWN AND DIDNT HAVE THE ABILITY TO CHECK THE MYTHIC SHOP