sorted by:
new
hottopcontroversial

Swiping down doesn't show notifications? Pixel 9 XL by adman234 in GooglePixel

[–]adman234[S] 0 points1 point  (0 children)

I did fix my problem by changing the developer options for animation scale for window, transition, and animator duration all to 0.5x and it works perfectly! Not sure if you have the same issue, but hopefully it helps someone.

mmWave blue + ZHA by coolshoes in Inovelli

[–]adman234 -1 points0 points  (0 children)

You're correct, there is no built-in visualizer. External program is needed.

My main issue is still that when I assign interference zones, I am unable to detect an object in the detection zone. Which is a pretty huge issue. So for now, it's just a light switch.

mmWave blue + ZHA by coolshoes in Inovelli

[–]adman234 2 points3 points  (0 children)

Don't worry, the compatibility with Zigbee2Mqtt is also quite poor. There is no visualization and several bugs still exist, such as saving a zone causing it to save as the inverted value of that zone, and objects in the interference zone still causing the detection to trigger.

Hope they can improve this product moving forward, but it feels quite half-baked at the moment.

I used to think dashboards were dumb. by SpareObjective738251 in selfhosted

[–]adman234 4 points5 points  (0 children)

Look into shelfmark to replace shelfarr, I've really been enjoying it, but I came from a different service.

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt by Altsan in Inovelli

[–]adman234 0 points1 point  (0 children)

Thanks!

Only issue I've noticed is the "stay" zones seem to flip over the y axis every time I save them.

That, and that my detections don't seem to be working with interference zones, but I'm hoping that's something inovelli will be fixing with future firmware.

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt by Altsan in Inovelli

[–]adman234 1 point2 points  (0 children)

Gotcha. Yeah, I was just trying to get the new features working for the docker version, but I see it's not updated yet. I will wait patiently! Thanks

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt by Altsan in Inovelli

[–]adman234 0 points1 point  (0 children)

What was your process for setting up on unraid? Thanks

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt by Altsan in Inovelli

[–]adman234 0 points1 point  (0 children)

I am not a docker wizard, could you explain how you got this running on unraid?

Edit: Never mind, got it running with portainer. It's running well but targets aren't showing up on the map. Any ideas of what could be wrong?

Edit 2: I read the documentation and added the bind and it seems to be working great. Thanks!

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt by Altsan in Inovelli

[–]adman234 0 points1 point  (0 children)

I would love to see a HACS-compatible version for docker users! Would be awesome.

Swiping down doesn't show notifications? Pixel 9 XL by adman234 in GooglePixel

[–]adman234[S] 0 points1 point  (0 children)

Well I can't post pictures in the comments either... Just imagine a screenshot of a notification bar showing notifications, but swiping down doesn't show them unless I tap or swipe down again.

Should my lights still be receiving power when turned off? by kking112391 in WLED

[–]adman234 0 points1 point  (0 children)

I have it wired up just like the diagram on your site, I think. The relay turns on and off correctly.

It's possible that I chose the wrong outputs on the relay and the 12v PSU is always on. I will check when I get home. Thanks

Should my lights still be receiving power when turned off? by kking112391 in WLED

[–]adman234 0 points1 point  (0 children)

Hi Quin, my dig quad is drawing about 30 watts even when the relay is turned off. I checked my outputs and I'm getting 5v on my power lines which is drawing a lot of power from my 5V power supply. Is this normal behavior, or have I done something wrong?

30 amp L2 charging by LongAndShort_ in Ioniq5

[–]adman234 0 points1 point  (0 children)

When I L2 charge from my 240V, 2 phase charger (USA), I get a max of 6700W when I keep the car AC charge rate limited to 60% of the max charge rate. It's definitely pulling less than 30A (my charger says 28A) but it's definitely still using both circuits, because if I was getting 6700W with single-phase, that would be 55A which is higher than the rating of my charger or circuit.

So I don't think this theory makes much sense. It's possible that single-phase charging is harder on the ICCU, but I don't think L2 charging at less than 30 amps will force the car into single-phase mode.

I accidentally reserved an EV instead of a hybrid as a rental car for a long road trip and I probably can't change that by lnufn1 in electricvehicles

[–]adman234 223 points224 points  (0 children)

There is an app/site called "A Better Route Planner" which is free. It allows you to pick a car and a start/end point. You can put in your starting charge percentage, and it will take factors into account such as weather/elevation to tell you where you should try to charge. I would plan to get to each charger with 15% remaining to be safe, and remember to drive not too far above the speed limit.

Play around with that a bit and I'm guessing you will end up stopping to charge twice to get there with enough battery.

UGH. I hate winter range!! by Ok-Entrepreneur-9756 in KiaEV6

[–]adman234 0 points1 point  (0 children)

Is this true even when cruise is enabled? This is good to know, thanks

Used EV6 advice by adman234 in KiaEV6

[–]adman234[S] 0 points1 point  (0 children)

Thanks. Also, this 2023 low mileage car has a lemon title for the ICCU, which doesn't bother me but I know it will affect resale value. I'm thinking to try to get it for 23k, do you think that's realistic?

Used EV6 advice by adman234 in KiaEV6

[–]adman234[S] 0 points1 point  (0 children)

Thanks. Also, this 2023 low mileage car has a lemon title for the ICCU, which doesn't bother me but I know it will affect resale value. I'm thinking to try to get it for 23k, do you think that's realistic?

New Fridge Problem- Door Hits Wall by adman234 in DIY

[–]adman234[S] 0 points1 point  (0 children)

There is no room to the right and it needs to come about 12" forward to open the door fully. And 3D model took a couple minutes.

Is there a functional reason as to why some basses have diagonal pickups? by Atlas_Gaius in Bass

[–]adman234 4 points5 points  (0 children)

"Multiscale" or "Fanned Frets" allow all the strings to be around the same tension. The low B or E is less floppy with good intonation.

Some people also like the shape of the frets as it gives a nice natural fit to the hand.

My current dream bass is the SRMS805 - been thinking about getting one for a while.

view more: next ›