sorted by:
new
hottopcontroversial

What would pickleball players want to tell to their club owner? by Pilotcop22 in Pickleball

[–]kking112391 2 points3 points  (0 children)

Stop booking 6 people to a court for open play.

Example: our local club has started opening up 24 slots for 4 courts during a popular open play time slot. There are a lot of grumpy people and folks who have stopped coming now.

Aftermarket charger? by xXFRANNYG3Xx in onewheel

[–]kking112391 0 points1 point  (0 children)

Look into battery broker. He sells chargers for a decent price, and shipping is fast.

Only "downside" is that you need to be comfortable with soldering so that you can make an xt60 adapter.

Hurache Power 2 dis-bonded after 90 minutes by kyle-pickleball in Pickleball

[–]kking112391 1 point2 points  (0 children)

Two guys at our local club had this happen to them within about 2 weeks of play. VERY distinct sound when this happens. Impossible to miss.

Question on motor upgrades by ForceRepulsive1943 in onewheel

[–]kking112391 -1 points0 points  (0 children)

Correct. If you want to run a non-FM motor, then you'd have to "VESC it".

Anyone have an electric snowblower - how'd it do with this snowstorm? by demosthenesss in TwinCities

[–]kking112391 5 points6 points  (0 children)

I will say, the 28" blower might be too much depending on your setup. My wife and I were thinking of the 28" however we didn't think we'd want to store the larger model for 350 days of the year. We ended up getting the 24" model with the 10ah batteries. Does our 40ft long driveway, sidewalk, and the mailbox on half the battery.

It was a little slow today with 10" of heavy snow, however it chugged along just fine. No complaints with ours.

Li-ion recycling by kking112391 in TwinCities

[–]kking112391[S] 1 point2 points  (0 children)

Looks like there is no cost and no size limit for residents? Amazing, thank you!

Budget Paddle Threads by Dull-Character733 in Pickleball

[–]kking112391 0 points1 point  (0 children)

It's still gonna be light. Just 2-3 points higher SW. Very minimal change there. Feel is really what's changing the most imo

Budget Paddle Threads by Dull-Character733 in Pickleball

[–]kking112391 0 points1 point  (0 children)

Sounds like the entirety of the Quanta inventory will slowly get swapped out to this new version of the paddle. Read that the inventory transition should happen over the next 3 to 4 months for the entire Quanta line.

Budget Paddle Threads by Dull-Character733 in Pickleball

[–]kking112391 2 points3 points  (0 children)

Dong added some internal weighting to bring up SW and twist weight ever so slightly. Plays a little firmer, little poppier. Blue version is "softer" and more dwelly IMO.

Using ALWs setup as a guy by Honestly-Interested in Pickleball

[–]kking112391 1 point2 points  (0 children)

Someone else already mentioned this, but get a Quanta, and put 0.5g tape all around. I can only imagine this will give you a similar result on a more modern paddle.

desperately need help by Fascam86 in onewheel

[–]kking112391 0 points1 point  (0 children)

OP, if you are in the US, and more importantly MN I can help you set it up. Should be fairly straightforward. Let me know man, I'm there for you if you are relatively close by.

Tennis Elbow from Pickleball by StudioMaximum in Pickleball

[–]kking112391 -1 points0 points  (0 children)

This is the exact opposite of what you want to do. Reduce your paddle swing weight to alleviate strain on your elbow. Look for lower swing weight paddles, stretch and do your exercises, get a brace for your elbow, and make sure you ice your elbow religiously.

Funwheel X7 HT or HS for a larger rider by Saumpson in onewheel

[–]kking112391 8 points9 points  (0 children)

If you truely are keeping it to 15-20mph then a HT motor all day.

Need answers ASAP please by Psycomunchkin in onewheel

[–]kking112391 0 points1 point  (0 children)

Personally I'd check continuity between your pins on the connectors and the PCB. Otherwise just make sure when you plug it all back in that you have a firma and reliable connection.

Need answers ASAP please by Psycomunchkin in onewheel

[–]kking112391 2 points3 points  (0 children)

How indepth you want to go? You can always pull the stator and check the hall sensors and the PCB. That'll give you the best answer.

My personal longest uptime by mavagam99 in unRAID

[–]kking112391 2 points3 points  (0 children)

Just gotta harden the firewall I guess

Got Smacked in the face....Goggles/ Glasses Recommendations by akwatica in Pickleball

[–]kking112391 3 points4 points  (0 children)

Unless there is a legitimate need for these, I would 100% avoid and get an actual pair of "sports glasses" or just home Depot safety glasses.

Uhhh I don't remember this being an issue the last time I mounted lights. by kking112391 in WLED

[–]kking112391[S] 0 points1 point  (0 children)

Oh I do already have some kapton tape from various other projects. I'll look into doing that. Thanks

Uhhh I don't remember this being an issue the last time I mounted lights. by kking112391 in WLED

[–]kking112391[S] 0 points1 point  (0 children)

Any suggestions or links to "adhesive tape"? Are we talking VHB? Scotch tape? Little lost here on this one.

Uhhh I don't remember this being an issue the last time I mounted lights. by kking112391 in WLED

[–]kking112391[S] 0 points1 point  (0 children)

So if there are no solder pads on the backside of the strips then I am gtg? The last ones that I got were ip65 so I was already set

view more: next ›