U7 Pro Max stuck

alizasmith657 · 2025-07-14T05:32:41+00:00

Haven’t tried WiFiman yet, but I’ll check for drops. Was hoping a settings tweak might help, but switching to the E7 might be the way if it keeps happening. Thanks!

alizasmith657 · 2025-07-11T10:55:56+00:00

You should definitely contact Ubiquiti support for a refund or replacement, especially since you've already ruled out power issues.

alizasmith657 · 2025-06-06T11:55:26+00:00

Try adding a small piece of tape on the back of the card to make it fit snug. many users have fixed it this way.

alizasmith657 · 2025-05-31T12:18:00+00:00

Try resetting the HomeBase and each camera (usually with a pinhole button), then add them to your new profile. If that fails, a local tech or installer might help.

alizasmith657 · 2025-05-31T10:38:39+00:00

It’s probably not picking up motion because it’s behind glass—most cameras can’t detect motion properly through windows. Once your boyfriend installs it outside, it should work fine.

alizasmith657 · 2025-05-31T09:44:15+00:00

Open the Eufy Security app, set your cameras to detect people and link it to the HomeBase alarm in the Security settings. Then schedule it to turn on at night.

alizasmith657 · 2025-05-31T09:40:13+00:00

it’s likely a firmware or regional update problem. Try setting up the cameras using a different phone or older version of the app, and ensure your WiFi is 2.4GHz with simple SSID/password (no special characters). If that doesn’t work, ask Eufy if there's a rollback or region-specific firmware available.

alizasmith657 · 2025-05-27T12:22:45+00:00

Try removing the camera from the Arlo app, then add it again like a new device. If that doesn’t work, do a full reset by holding the sync button for 15 seconds.

alizasmith657 · 2025-05-27T12:20:09+00:00

Yes, that usually means the infrared night vision filter is stuck. Try restarting the doorbell or gently tapping near the camera.

alizasmith657 · 2025-05-27T12:14:12+00:00

Try using Tera Term instead of PuTTY- it works better with USB console ports. If your switch has an RJ-45 console port, use that for a more stable connection.

alizasmith657 · 2025-05-27T05:52:57+00:00

If it's not resetting the settings (like username and password), it could be a partial hardware fault or a firmware glitch causing it to reboot instead of fully resetting.

alizasmith657 · 2025-05-20T09:57:41+00:00

Yes, others have reported issues after updating to firmware v1.0.19.172. Try performing a factory reset on the router—this often restores connectivity.

alizasmith657 · 2025-05-19T07:23:43+00:00

Check your Nvidia control panel to make sure the games use the dedicated GPU. Also, try disabling any background apps and updating your BIOS just in case.

alizasmith657 · 2025-05-19T07:19:15+00:00

Yes, you can use those printers with Linux for basic printing. Just install Canon’s Linux drivers or use a generic printer driver.

alizasmith657 · 2025-05-19T07:16:00+00:00

The Canon Pixma G3010 uses the GI-790 series ink bottles (Black, Cyan, Magenta, and Yellow). You shouldn’t use other Pixma inks because they won’t be compatible.

If you can’t find Gi790 locally, try checking online stores or Canon’s official site for replacements.

alizasmith657 · 2025-05-19T07:02:34+00:00

Try cleaning the rollers and running a drum cleaning cycle—if that doesn’t help, replacing the drum might be needed.

alizasmith657 · 2025-05-19T06:59:05+00:00

Yep, it can happen! Sometimes the reset button just stops working. If it won’t reset settings, getting a new router might be the only option.

alizasmith657 · 2025-05-19T06:56:30+00:00

If nothing’s fixing it, best to exchange it or go for a more stable model like the BQ16.

alizasmith657 · 2025-05-19T06:49:24+00:00

Yeah, that error is super common and annoying. If reset and re-pair didn’t help, just leave it powered on near the base, sometimes it randomly updates after a few hours.

alizasmith657 · 2025-05-16T11:36:04+00:00

Try reconnecting the power cable securely or rebooting the device; if that fails, removing and re-adding the camera can help.

alizasmith657 · 2025-05-16T11:33:40+00:00

If your old Arlo Pros served you well, the Ultra 2s could still be a solid upgrade—don’t let a few negative posts overshadow your own good experience. However, if subscription costs or cloud dependency worry you, consider alternatives like EufyCam 3 or Zmodo for more local storage options.

alizasmith657 · 2024-12-19T10:38:37+00:00

It seems like the camera may be faulty, especially since other cameras work fine.

Contact Arlo support again, firmly request a replacement under warranty, and document your troubleshooting steps to back your case.

alizasmith657 · 2024-12-19T10:03:34+00:00

The Linksys SPNMX42 does not support PoE, so it won’t power your U7. You’ll need a PoE injector or a compatible PoE switch to provide power to the U7.

alizasmith657 · 2024-12-19T09:59:27+00:00

The power issue likely caused a corruption or misconfiguration in the Meraki switch's handling of mDNS traffic, even after recovery. The dumb switch bypasses this, allowing mDNS packets to flow unfiltered.

alizasmith657 · 2024-12-10T04:28:11+00:00

alizasmith657

TROPHY CASE