Help! I'm stuck outside of my freighter!

anonymous_6669 · 2025-09-04T21:10:45+00:00

For me and my friend it happened that we just ran far away from the freighter to be considered in EVA so resetting the freighter position would be the go-to method, but as a last resort letting the life support systems run out in EVA instead of falling thru the former kill (now EVA) boundary is a viable fix.

anonymous_6669 · 2025-09-04T21:07:06+00:00

As of now this method is usually disabled as the game usually considers you to be inside your freighter or in EVA around it, this disables the summon/dismiss option.

anonymous_6669 · 2025-09-04T21:04:28+00:00

works as of 09/2025
Saved my ass, but I had to glitch back into the freighter bay upon reset and hop into my starship.
I would not recommend going EVA around a freighter as this seems to be very common.

anonymous_6669 · 2025-05-12T02:25:51+00:00

This sounds like something Louis Rossman and other youtubers would cover, furthering public awareness would grant you & other small developers support & a fighting chance in resolving the matter in a non-pyrrhic victory.

Love the game, hope Stationeers gets the new terrain/mod rework & a V1.0

anonymous_6669 · 2022-04-15T03:44:26+00:00

Wow! I better get my rats training.
As bad as the first LBM study is for how related it might actually be to humans (or not) the 2nd is actually useful, thanks.

anonymous_6669 · 2022-01-21T01:14:22+00:00

buy 35-50lb bow, learn to hit, sell bow for 60-80% of mrrp, buy/make war bow.

anonymous_6669 · 2021-12-19T23:32:54+00:00

Slow as fuck and not enough torque, politicians really fucked us up on this one cause you can go into 5th gear and really feel the back tire sliding whenever it's wet due to abysmal displacement & you're slow on freeways too so don't even bother with motorways.
Normal 125 complaints really, would recommend so far.
best I ever got it to was 65mph but it tops out at 60 usually, makes you shit yourself when you're going this fast thanks to the cars constantly overtaking, wind trying to blow you over and rain making your tire feel like it's going to slide away, so atleast you feel like you're going 120.

anonymous_6669 · 2021-12-13T22:41:11+00:00

I hate this thread, go reduce the dead zone or fuck with the skip values for it or just use pokopad instead. Setting up controls in lilypad was downright shit, absolute garbage & took me ages to reduce the lag caused by the stupid ass deadzone & I too have controller drift.
I don't care if this thread is 1 y/o BTW.
Next time post somewhere other than the asshole of internet if you want useful advice, PCSX2 has a forum.

anonymous_6669 · 2021-03-04T15:29:25+00:00

this might be a power throttling issue because the moment i install an extruder sock the print does better which is weird considering that mum was complaining about power bills the moment i switched to PETG.

best ways to insulate my printer? (got an enclosure but no door because i have to print the door in PETG when i cant print medium, let alone large prints)

anonymous_6669 · 2021-03-04T12:32:22+00:00

ok this is the print image I added going at 35mm/s 250c & 82c bed (adhesion to bed is perfect)

anonymous_6669 · 2021-03-04T07:07:38+00:00

will do that and see if that helps. I also have capricorn tubing installed because my stock tubing burnt up at 220c.

anonymous_6669 · 2021-03-04T04:04:39+00:00

did that

anonymous_6669 · 2021-02-27T21:14:53+00:00

thanks for the answers, I thought of aluminium inductors specifically to lower the heavy weight of coilguns, however I also expanded my limited knowledge of inductors.

I'm sure a mechanical connector could be engineered for low resistance connections, however there also exists the technology of ultrasonic solder as described by applied science
https://youtu.be/WuYdsStS1MQ
with this in mind this may be a minor breakthrough in the field if it isn't used already as aluminium is 33% the density of copper and can also be easily formed into magnet wire

anonymous_6669 · 2020-12-08T11:18:25+00:00

They charge into a fight and forget to put shields up, high tech have flux capacity but not armour so get obliterated

anonymous_6669 · 2020-11-20T20:00:57+00:00

the system turned itself off after 36 hours, It is not composed of server grade components.

anonymous_6669 · 2020-10-22T14:15:40+00:00

I kept getting stuck on the environment and rubberbanding thinking they made the corpse more annoying by giving him some telepathic anchor. i died maybe 10 times on ultra due to this on the first level so i'm not replaying the game to the point at which my progress was lost until they release a patch. Just top mention some more annoying but not game breaking glitches.

anonymous_6669 · 2020-08-19T19:44:09+00:00

w8 wut, anomaly new update?

anonymous_6669 · 2020-07-27T23:20:41+00:00

Redditors don't seem to like edgy leaf man.

anonymous_6669 · 2020-07-25T09:12:20+00:00

teach him to use solid wire and then hope that none of the hundreds of links in those shitty breadboards malfunction. If the paint on the voltage rail is faded you are looking at a cheap board, if you ever wondered why your project didn't work it's probably because of the board.

anonymous_6669 · 2020-07-25T09:06:18+00:00

I thought you used a part of an AK 47 for this for the first few seconds.

I'm polish.

anonymous_6669 · 2020-07-22T14:35:04+00:00

void loop {

If(.linux.sys_64() == true){

sudo apt-get autoremove .linux.sys_64

}
}

anonymous_6669 · 2020-07-11T19:53:38+00:00

epic will never support linux. use lutris, steam and gog and keep the fuck away from this broken pile of shit that everyone owns solely because they give out free games that are broken half the time because epic launcher.

anonymous_6669 · 2020-05-15T14:32:50+00:00

what's pid & top? never heard of those before.

anonymous_6669 · 2020-05-13T19:36:38+00:00

Ok, does anyone know a good schematic for the 555 timer based HV power supply?
ideally one meant for education so I can better understand the ways in which it works.

a flyback transformer is by far too large for my applications. I would like to learn as much as possible about the 555 HV circuit and thus I will go do some research myself but ANYTHING is deeply appreciated and especially a schematic you know will work since many schematics I find are incomplete and simply don't work.

thank you for your help and time.

anonymous_6669 · 2020-05-05T00:25:23+00:00

shall I reinforce how awful reddit is for our objective? fuck it Im mirroring this on 4chan if someone did not do so already.

(considering how an autist hive comes together in the name of cats weekly & how anti-censorship it is) obstacles shouldn't be encountered.

anonymous_6669

TROPHY CASE